SA-224 is composed of special crosslinking monomer polymerization. Apply to stick the color sand on the galvanized steel plate. Excellent adhesive force, water resistant and weatherability

Water based polyurethane electrostatic flocking adhesive is designed for rubber, PVC, PU, shoes materials etc. It is VOC free and formaldehyde free

Water based composite adhesive is non-toxic, VOC free and formaldehyde free, it is designed for PVC, PP, sponge, paper, cloth, can be also used for high grade composite fabric, car interior decoration, bags, paper bags, etc.

Water based card adhesive is VOC free and formaldehyde free, it is designed for PVC firm for card industry

The peelable coating is designed using water based polyurethane that can be applied to smooth, non-porous surfaces and simply peeled off once dry. All peelable coatings may be applied with water compatible airless sprayers or automatic spray systems to protect surfaces from minor nicks, scratches, abrasions, and any other unwanted contaminants during transit or in completion or assembly during manufacturing.

SA-902 is a waterbased  polyurethane sealant that penetrates into the slate road and has a hydrophobic function, good abrasion resistance, water resistance, and can inhibit the growth of seaweed and mold.

SA-236 is a primer specially designed for polar films (PVC, corona PET, PS etc.). Excellent adhesive force on the PVC. It can improve the glue coating property on PVC film. And block the plasticizer.

BA-8407 water-based polymer, designed for coating on untreated non-polar substrate. Good adhesion, good water-resistance and scratch resistance, excellent weatherability. Applicable to be used as top coating on untreated PET film. Can’t be used as pigment grinding emulsion

BA-8411 water-based polymer, designed for ink on untreated non-polar substrate. Good adhesion, good water-resistance and scratch resistance, excellent weatherability. Applicable to be used as top coating on untreated PET film. Can be used as pigment grinding emulsion.

BA-8412 water-based polymer, designed for ink on untreated  substrate. Good adhesion, good water-resistance and scratch resistance, excellent weatherability. Applicable to be used as top coating on untreated PET film. Can’t be used as pigment grinding emulsion.

Description PAPI consists of pure-MDI and polymerized-MDI. It is used in applications such as rigid, semi-rigid, and integral skin foams, as well as coatings, adhesives and elastomers. Type Pure-MDI and polymerized-MDI Typical properties Item PAPI 27 PAPI 135C PAPI 135 Function 2.7 2.7 2.7 NCO Content(%) 31.4 31.4 31 NCO Equivalent 134 131.3-140.1 135.5 Molecular Weight 340 340 340 Acidity HCl (mg/Kg) 170 170 100 Viscosity (25℃) (mPa s) 150-220 180-220 150-220 Density (25℃) 1.23 1.23 1.23 Application Widely used for the production of elastomers, artificial and synthetic leather, spandex (polyurethane fibers), shoe soles, coatings, and adhesives. Storage and handling Available in 250kg/drum Store products in tightly closed original containers at 5-35℃ Shelf life: 12 months from delivery date According to non-dangerous goods transport

SA-2281 Water based cold laminating adhesive is eco-friendly, benzene free, very low VOC. It can be used for BOPP, PET and laser film to paper bonding.

Silicone Type Antifoam Agent Type HS code Appearance Active Ingredient Suggested Add Amount Ingredient Solvent Applications and Characteristics waterbase system solventbase system UV system SG-430 3402900090 water-write transparent solution 7% 0.1-1% Mixture of  antifoam copolymer and organosilicone aliphatic hydrocarbon 1.Excellent compatibility and fast speed of defoam ability. 2.can be used in any stage of coating producing and operating. 3.Suitable for UV and epoxy system.   √   SG-441   water-write transparent solution <3% 0.1-1% Modified polysiloxane solution Mixed aromatics 1.Excellent compatibility and fast speed of defoam ability. 2.can be used in any stage of coating producing and operating.   √   SG-472   water-write transparent solution 70% 0.1-1% Modified polysiloxane solution Mixed aromatics 1.Good compatibility and strong defoam ability. 2.Excellent foam-broken and anti foam develop ability. 3.Suitable for any stage of the coating produce and all types of the operate way like brush, roller and spray coat.   √ √ SG-467   water-write transparent solution 1% 0.1-1% Modified polysiloxane solution Isooctyl acetate 1.Good compatibility and strong defoam ability. 2.Excellent foam-broken and anti foam develop ability. 3.Suitable for any stage of the coating produce and all types of the operate way like brush, roller and spray coat.   √ √ SG-475   lemon-yellow viscous fluid 100% 0.05-1% Modified polysiloxane  … 1.Strong defoam ability and suitable for solventbase and UV system. 2.especially sutiable for defoaming and foaming off of high viscosity system.   √ √ SG-486N   feculent viscous fluid 100% 0.05-1% White carbon black modified polysiloxane … 1.High efficiency of defoaming, foam off and anti-foam development,epscially it has good effect to broke little foam. 2.Especially suitable for silk screen ink and epoxy system.   √ √ SG-419W   water-write transparent solution 60% 0.05-1% Modified polysiloxane solution dipropylene glycol monomethyl ether 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √     SG-424W   lemon-yellow viscous fluid 100% 0.05-1% Modified polysiloxane  … 1.High speed of defoaming. 2.Easy to disperse. 3.Strong defoam ability. √     SG-465W   white emulsion 50% 0.05-1% Modified organosilicone emulsion water 1.High speed of defoaming. 2.Easy to disperse. 3.Strong defoam ability. √     SG-471W   lemon-yellow viscous fluid 100% 0.05-1% Modified polysiloxane  … 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √ √ √ SG-481W   lemon-yellow feculent  viscous fluid 100% 0.05-1% Mixture of modified polysiloxane and antifoam materials … 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √ √ √ SG-485W   white emulsion 25% 0.05-1% Modified organosilicone emulsion water 1.High speed of defoaming. 2.Easy to disperse. 3.Strong defoam ability. √     SG-491W   lemon-yellow viscous fluid 100% 0.05-1% Mixture of modified polysiloxane and antifoam materials … 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √ √ √

Non-silicification Type Antifoam Agent Type HS code Appearance Active Ingredient Suggested Add Amount Ingredient Solvent Applications and Characteristics waterbase system solventbase system UV system SG-506W 34029000.9 lemon-yellow viscous fluid 100% 0.3-1% Mineral oil compound … 1.High efficiency of defoaming. 2.used in emulsion latex system. √     SG-520   lemon-yellow viscous fluid 100% 0.3-1% Non-silicification copolymer … 1.Excellent compatibility and deadly lower trend of shrinkage.2.High speed of defoaming. 3.Suitable for UV system and other high crosslinking system.   √ √ SG-530   lemon-yellow viscous fluid 100% 0.1-1% Acrylic ester copolymer … 1.High defoam ability. 2.Has great effect to thick-coat , high viscosity system, zinc stearate primer.3.Suitable for PU,UPE and epoxy system etc.   √ √ SG-552   lemon-yellow transparent solution 30% 0.1-1% Acrylic ester copolymer Mixed aromatics 1.Higher defoam efficiency and cost performance.       2.Especially suitable for thick-coat , high viscosity system and  zinc stearate primer.3.Lower trend of shrinkage   √   SG-555   lemon-yellow transparent solution 7% 0.1-1% Non-silicification copolymer solution Mixed aromatics 1.Excellent compatibility and deadly lower trend of shrinkage. 2.Lower effect to the transparency of the coat film. 3.Suitable for medium and high polar system like UV.     √ SG-557   lemon-yellow transparent solution 40% 0.1-1% Non-silicification copolymer solution Mixed aromatics 1.Excellent compatibility and deadly lower trend of shrinkage. 2.Lower effect to the transparency of the coat film. 3.Suitable for medium and high polar system like UV, epoxy and PE system.   √ √ SG-590   Water white and lemon-yellow viscous fluid 100% 0.1-1% vinyl ether compound … 1.High defoam ability. 2.Suitable for all types of solventbase system and UV system especially for coil material coat. 3.Excellent foam burst effect.   √ √

The Wetting agent for Base Materials Type HS code Appearance Active Ingredient Suggested Add Amount Solvent Ingredient Static surface tension Dynamic surface tension Applications and Characteristics waterbase system solventbase system UV system SG-304 3402900090 Water white solution 50% 0.1-1% dipropylene glycol monomethyl ether The mixture of non-siliceous surface active agent 33 38 1.Can reduce dynamic surface tension largely. 2.Excellent defoam ability, wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-342   lemon-yellow viscous fluid 100% 0.1-1% … The mixture of non-siliceous surface active agent 33 38 1.Can reduce dynamic surface tension largely. 2.Excellent defoam ability, wetting ability and anti-shrinkage property. 3.Good levelling property. √ √ √ SG-343   lemon-yellow viscous fluid 100% 0.1-1% … Modified organofluorine compound 18 45 1.Suitable for waterbase,solventbase and UV system. 2.High cloud point. 3.Excellent wetting ability and anti-shrinkage property. 4.Good water solubility and levelling property. √ √ √ SG-344   lemon-yellow viscous fluid 100% 0.1-1% … The mixture of non-siliceous surface active agent 33 38 1.Can reduce dynamic surface tension largely. 2.Excellent wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-345   lemon-yellow viscous fluid 100% 0.1-1% … polyether modified silicone oil 22 48 1.Suitable for waterbase,solventbase and UV system.2.High cloud point. 3.Excellent wetting ability and anti-shrinkage property. 4.Good water solubility and levelling property. 5.Using under PH 6-8 √ √ √ SG-346   lemon-yellow transparent solution 50% 0.1-1% dipropylene glycol monomethyl ether polyether modified silicone oil solution 23 48 1.Suitable for waterbase,solventbase and UV system. 2.Can reduce surface tension largely. 3.Excellent wetting ability and anti-shrinkage property. 4.Can be used in more PH range. √ √ √ SG-347   lemon-yellow viscous fluid 100% 0.1-1% … non-ionic surface active agent compound 33 38 1.Excellent dynamic surface activity and strong hydrophilic property .2.Excellent wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-348   lemon-yellow transparent fluid 100% 0.1-1% … polyether modified silicone oil 23 48 1.Suitable for waterbase,solventbase and UV system 2.Excellent fast-levelling effect. 3.Can reduce surface tension largely. 4.Excellent wetting ability and anti-shrinkage property. 5.Good levelling property and hydrolysis resistance. 6.Can be used in more PH range. √ √ √ SG-349   lemon-yellow transparent fluid 100% 0.1-1% … polyether modified silicone oil 23 48 1.Suitable for waterbase,solventbase and UV system. 2.Excellent fast-levelling effect. 3.Can reduce surface tension largely. 4.Excellent wetting ability and anti-shrinkage property. 5.Good levelling property and hydrolysis resistanc. 6.Can be used in more PH range. √ √ √ SG-360   lemon-yellow viscous fluid 100% 0.1-1% … polyether modified silicone oil 22 52 1.Suitable for waterbase,solventbase and UV system. 2.Excellent fast-levelling effect. 3.Can reduce surface tension largely. 4.Excellent wetting ability and anti-shrinkage property. 5.Good levelling property √ √ √ SG-364   lemon-yellow viscous fluid 100% 0.1-1% … non-ionic surface active agent compound 26 30 1.Excellent dynamic surface activity and strong hydrophilic property. 2.Excellent wetting ability and anti-shrinkage property.  3.Good levelling property. √     SG-375   lemon-yellow viscous fluid 100% 0.1-1% water non-ionic surface active agent compound 32 51 1.Excellent dynamic surface activity 2.Excellent wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-378   lemon-yellow Transparent fluid 100% 0.1-1% … polyether modified silicone oil 21.5 48 1.Suitable for waterbase,solventbase and UV system. 2.Can reduce surface tension largely. 3.Excellent wetting ability and anti-shrinkage property. 4.Good levelling property and can be used under PH 6-8. √ √ √ SG-379   lemon-yellow viscous fluid 100% 0.1-1% … polyether modified silicone oil 21.5 48 1.Suitable for waterbase,solventbase and UV system. 2.Can reduce surface tension largely. 3.Excellent wetting ability and anti-shrinkage property. 4.Good levelling property and can be used under PH 6-8. √ √ √

Water based card adhesive is VOC free and formaldehyde free, it is designed for PVC firm for card industry