Waterproofing hydrophobic oil-repellent nano coating spray for shoes or other fabric

Buy Waterproofing hydrophobic oil-repellent nano coating spray for shoes or other fabric,a chemical coating for Waterproofing hydrophobic oil-repellent nano coating spray for shoes or other fabric from SINOGRACE Chemical,China good Waterproofing hydrophobic oil-repellent nano coating spray for shoes or other fabric suppliers, factory & manufacturers. If you want to buy Waterproofing hydrophobic oil-repellent nano coating spray for shoes or other fabric, please mail to sales@sinogracechem.com

Waterproofing hydrophobic oil-repellent nano coating spray for shoes or other fabric is a Textile self-cleaning nano coating.

Typical properties

Appearance： Yellowish milky liquid

Solid content (%)： 20

pH (50% in water)： 3.0-5.0

Density (g/cm3 at 20℃)： 1.07±0.03

Viscosity (mPa·s at 20℃)： 30-150mPa·s at 20℃

Dilute ratio： 1:10

Application

-Fabric, Textile, Cotton, Wool, Polyester fabric, Suede/leather corduroy etc.

Home application

-Clean the textile products (clothes, shoes etc)

-Dry it under room temperature

-Dilute the PF-206 by mixing with water (1 part PF-206 to 10~12 parts water)

-Spray the diluted solution on the textile products or dipping it into solution

-Dry it under high temperature (>100℃) for 10-15min by using dryer, household electric iron, blower and laundry drier etc.

Industrial application

The preparation of solution

-Firstly, add the quantitative Waterproofing hydrophobic oil-repellent nano coating into a container, and then the quantitative water is added into. Finally, stir the solution at a low speed until uniformity.

-While using it with crosslinking agent, penetrating agent, crease resistant resin and other additives together, all of these additives should be separately diluted and avoid additives raw solution mixing.

The recommended dosage

-Polyester fabric: 10~25 g/L

-Nylon fabric: 10~ 25g/L

-Polyester or cotton fabric: 15~40 g/L

The application method

-Pad-roll

-Predrying temperature: 100~120℃

-Dry: Recommended 150-170℃ by the stenter setting machine for 60 seconds.

Storage and handling

Available in 5L/barrel or 25L/barrel for Waterproofing hydrophobic oil-repellent nano coating spray for shoes or other fabric
Store products in tightly closed original containers at 5-35℃
Shelf life: 12-15 months from delivery date
According to non-dangerous goods transport