-
Common problems and solutions during lamination (below)
- 2023-12-16 16:51:40
- admin
Common problem Cause Solution The middle part of the compound bubbles Add dry oil when brushing Dry and then recombine The amount of glue is too small Increase glue Film or print surface contamination or excessive dusting Dedusting The overflow on the surface of the rubber roller is not removed, causing the mucous membrane to empty Cleaning glue roller The pressure is too small, and the ...
-
Strippable resin for preparing a temporary protective layer
- 2024-03-23 17:25:13
- admin
What is a peelable resin? Strippable resin is a special resin material with strippable properties (also known as removable film resin). It is often used in the preparation of protective films for electronic products, packaging of semiconductor devices, etc., which can protect these products more intact, and it is easy to peel off when it needs to be replaced or disassembled. When prepari...
-
Textile people have to understand the fabric coating complete
- 2024-11-04 17:44:56
- admin
Fabric coating is a kind of fabric treated by a special process. It can form a uniform layer of covering material on the surface of the fabric, so as to achieve waterproof, windproof, breathable and other functions. Textile Coating, also known as glue coating, that is, acrylic coating, is the most common and most common kind of coating at present. As a textile person, you must know 15 kinds of coa...
-
What is the difference between nitrile butadiene rubber and carboxyl nitrile butadiene latex
- 2024-11-23 17:18:48
- admin
The difference between nitrile rubber and nitrile latex Different raw materials Carboxyl nitrile latex: butadiene, acrylonitrile and methacrylic acid Carboxyl nitrile butadiene latex (XNBRL) is a terpolymer of butadiene, acrylonitrile and acrylic acid or methacrylic acid, and is a modified variety of nitrile butadiene latex. Due to the introduction of carboxyl group, while containin...
-
Classification of styrene butadiene latex
- 2024-12-11 17:38:08
- admin
Styrene-butadiene rubber latex is a kind of copolymer emulsion obtained by emulsion polymerization with butadiene and styrene as monomers or main monomers. Ordinary styrene butadiene latex Carboxylic butadiene-styrene latex Bufedipine latex There are many varieties of styrene-butadiene latex, according to the different types of raw materials can be divided into ordinary styrene-butadiene late...
-
Classification and research prospect of water-borne peeling coatings
- 2025-04-01 17:11:55
- admin
Coating industry: Strippable coating is a kind of functional coating for short-term protection of matrix surface, with good constructability, corrosion resistance and anti-friction properties, and is widely used in furniture, construction, machinery, Marine engineering and other fields. Solvent-based strippable coatings currently occupy a large market, with simple coating, good mechanical properti...