Categories
new blog
Polyurethane (PU) is a kind of organic polymeric compounds containing repeated carbamate group (NHCOO) in the main chain.Polyurethane polymer materials have the advantages of wear resistance, high temperature resistance, good adhesion, easy processing, low price, but some polyurethane water resistance, heat resistance is poor, need to be modified by specific methods, in order to achieve the purpos...
Preparation method of waterborne acrylic emulsion 1.The preparation of water-based acrylic emulsion: the raw materials including acrylic hard monomer, acrylic soft monomer and acrylic functional monomer all acrylic monomer, emulsifier, water added to the pre-emulsifying kettle, emulsifying 30 ~ 40min.A non-stratified emulsion is obtained. Then the remaining water, remaining emulsifier and buffer a...
Polyurethane adhesive is a kind of high-grade adhesive, with excellent flexibility, impact resistance, chemical resistance, wear resistance, and the most important is its low temperature resistance. Because of its series of advantages, polyurethane adhesives are widely used in the following fields. 1. Carpentry industry With the improvement of people's awareness of environmental protection, the wo...
Polyurethane (polyurethanes, abbreviated PU) is a kind of polymer with -NHCOO-repeat structural unit as the main chain. Isocyanate (monomer) is polymerized with a hydroxyl compound.Due to the strong polarity of the carbamate group, insoluble in non-polar groups, with good oil resistance, toughness, wear resistance, aging resistance and adhesion. Materials suitable for a wide temperature range (-50...
"Non-stick pan" is a very common pot in the kitchen, because in the process of using less oil consumption, less smoke, but also not easy to paste the problem, so it is welcomed by many people. In recent years, however, there have been more and more controversies about non-stick pans: Some people think that non-stick coating will produce toxic substances, can not be used for a long time; Some peopl...
Water-based adhesive with high polymer, water-soluble resin as the main raw materials, water as the solvent, odor is small, environmental protection and non-toxic. With the continuous improvement of people's environmental awareness, water-based adhesives have become the mainstream of the market in recent years. In practical application, some packaging and printing manufacturers do not know enough ...
Application Acrylic emulsion is a kind of emulsion with wide applicability for construction. It can be used as a new chemical material for repairing steel structure concrete of hydraulic construction, port construction, highway, bridge, metallurgical chemical industry (urea chloro gangue) and other industrial civil buildings, such as seepage prevention, corrosion prevention and antifreeze. Cl...
Polyurethane is the short form of polyurethane (PU). It is a block polymer formed by addition polymerization. It is a polymer compound with flexible and elastic polyether or polyester as soft segment and rigid and hard carbamate as hard segment. It contains a considerable number of ammonia ester bonds. Waterborne polyurethane has been successfully applied in the textile printing and dyeing industr...
Water-based adhesion enhancer Product introduction Water-based adhesion enhancer, a water-based chlorinated PP acrylic emulsion, used to improve the adhesion effect of water-based paint and ink on polypropylene (PP) material. Suitable for PP substrate, can do bottom, surface coating paint. Product specifications Composition: acrylic modified emulsion Appearance: Milky white viscous liquid Non-vola...
The addition of wetting dispersant has obvious effect on the foam of some water-based ink.For example, polyacrylic acid wetting dispersants foam more than other types of wetting dispersants.Generally speaking, wetting dispersant foam with low dispersion capacity is also less. If diisobutyl sulfonate is based on disate, there is little foam at its content of 0.1-0.25%. The use of thickeners will ma...
Printing ink according to the plate type is mainly divided into relief ink, lithographic ink, gravure ink, screen printing ink four categories According to its own characteristics can be divided into two categories of water-based ink and oily ink So what is water - based ink and oil - based ink? What's the difference? Usually see a lot of books, albums and other paper printed matter are used ...
Surfactants are now used not only in herbicides but in all forms of pesticides. Surfactants can be used to make pesticide preparations that can not be used directly. As a pesticide additive applied to pesticides, it can not only improve the use effect of pesticides, but also reduce the amount of pesticides, reduce the impact of pesticides on the environment, and bring great benefits to agricultura...
Environmental protection pressure has prompted some traditional solvent-based products to gradually withdraw from the market and replace them with water-based, high solid content, powder products, etc.Waterborne polyurethane, as an important member of waterborne products, is facing unprecedented development opportunities with its unique excellent properties.In addition to the leather industry, it ...
First: Teflon coating introduction Industrial Teflon coating is suitable for plastic rubber mold, ball mold, glove mold, latex mold, roller, conveyor belt, mechanical parts and other surface treatment, containing "FEP" and "PTFE" polytetrafluoroethylene ingredients with high-performance resin, divided into the bottom coating and surface coating a total of two layers, has the best anti-corrosion, h...
PET protective film material is transparent colorless, the surface after hardening treatment, the general PET protective film material according to the origin of different, the surface hardening value between 3H-4H, the better the surface hardening, the stronger the wear resistance. Light transmittance is also the main property of PET protective film materials, the general light transmittance is m...
The primer sprayed on the plastic surface can promote the effective adhesion between the glue and the material, increase the adhesion between the adhesive and the plastic, and solve the problem of degumming, and the main role of the primer is to solve the problem of degumming in the adhesive process. One: The definition of primer? The base coating agent is a base coating treatment agent that assis...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية