Categories
new blog
Water-based pressure-sensitive adhesive is a type of adhesive that uses water as a solvent and is pressure-sensitive, that is, it can adhere quickly to the surface when slight pressure is applied. Due to its environmental protection, non-toxic, cost-effective, adjustable viscosity and other advantages, it has gradually become the mainstream product in the pressure sensitive adhesive market. Accord...
The foam problem in water treatment has troubled many people, debuting the initial foam, surfactant foam, impact foam, peroxide foam, circulating water treatment with non-oxidizing fungicide generated foam, etc., so the use of defoamer in water treatment is more common, this article comprehensively introduces the principle, classification, selection and dosage of defoamer! Methods of foam eliminat...
Advantages and disadvantages of the same type of defoamer Organic defoamer such as mineral oils, amides, low alcohols, fatty acids, fatty acid esters and phosphate esters has been studied and applied earlier, belonging to the first generation of defoamer, which has the advantages of easy access to raw materials, high environmental performance and low production cost.The disadvantages are low defoa...
Defoamer is a substance with low surface tension and high surface activity, which can inhibit and eliminate foam in the liquid, that is to say, defoamer can reduce the surface tension of water, solution, suspension, etc., to prevent foam generation or eliminate the original foam.Long-term defoaming is also known as defoaming, and the length of the defoaming time is the main sign of the quality of ...
Depending on the coating material used, the type of coating is also different. PVDC coating, PVOH coating, silicon oxide (Si0x) coating, Acrylic (Acrylic) coating these four kinds of plastic coating characteristics and applications are introduced. According to the different coating materials used, plastic coating mainly has the following types: 01/PVDC coating PVDC emulsions can be coated in sever...
One,Overview Paper-plastic composite can make the surface of paper printed matter more bright, smooth and color more bright and full of three-dimensional sense, but also play a role in moisture, anti-fouling, anti-counterfeiting, folding resistance, wear resistance and so on.It has been widely used and rapidly developed in printing and packaging industry at home and abroad. The market demand for p...
With the rapid development of printing and packaging industry, the appearance design of products is becoming more and more high-end. The composite technology used in modern exquisite printing mainly includes: paper printing and plastic film composite and plastic printing and plastic film composite, that is, paper-plastic composite and plastic-plastic composite.As a new type of packaging material, ...
As we all know, printed laminating is one of the surface decoration processing technology of printed matter, which is the auxiliary process of printing. It is the plastic film bonded together with the printed matter through the adhesive to improve the surface gloss, strength and aesthetic effect of the printed matter, so as to make it water resistant and wear resistant, which is an effective means...
Composite film manufacturer there are bubbles and spots in the composite film, what is the cause? There are many factors in this kind of situation, and the actual situation needs to be analyzed in detail. The basic elements commonly used to produce bubbles and spots are: 1, environmental factors such as dust and suspended matter interference, which requires a good environmental health area environ...
According to the different raw materials and equipment, the coating process can be divided into two kinds of coating process and pre-coating process. That is to say, the film used in the coating process is now coated, and the adhesive used is generally solvent-based and emulsion type, prepared according to need. However, the film used in the pre-coating process is pre-coated, and the adhesive used...
Whether the water-based film adhesive meets the quality requirements of composite products, in addition to the quality of the glue itself, but also related to the paper, film, equipment accuracy, operating experience and other supporting factors in the film coating process, after long-term practice, we summarized the common problems in the application of water-based film adhesive, and put forward ...
According to the different raw materials and equipment, the coating process can be divided into two kinds of coating process and pre-coating process. That is to say, the film used in the coating process is now coated, and the adhesive used is generally solvent-based and emulsion type, prepared according to need. However, the film used in the pre-coating process is pre-coated, and the adhesive used...
As a kind of widely used adhesive, coated adhesive has a variety of processes. Here are some of the common processes used: 1. Hot melt coating: hot melt coating is to place a layer of film on the surface of the print, and then through hot pressing the film and the print together.In this process, the laminating glue is heated to turn it into a liquid, which then forms a uniform coating between the ...
Brand :Sinograce Type: Water base adhesive Appearance：Milky white emulsion with blue light Performance and use:This product is suitable for the coating of BOPP film, PET film and printed color paper (dry coating process). High bonding q degree, large tension compound drying speed, good parallel flow; For gold and silver cardboard, single powder paper bonding q degree, tension q, to avoid the...
Water-based coating adhesive is a product based on water-based environmental protection emulsion system, which is mainly used in the field of packaging and printing, and can firmly bond film materials to paper and other surfaces. Characteristics of water-based coating adhesive Fast dry ：Under the appropriate temperature and pressure conditions, the water-based coating adhesive will dry quickly and...
Laminating glue is currently a kind of strong glue widely used in the market, so what is the application processing process of laminating glue? The application processing technology of laminating glue is as follows: 1, the composite method is dry composite, that is, the coating machine should use a dry composite machine with curing furnace and composite roller heating. 2, curing furnace ambient te...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية