Categories
new blog
After toning water-based plastic composite ink is used, there is often error with the standard color, which is difficult to completely avoid the problem, can only be reduced to a low limit. Different printing ink factory use of the same part of the printing machine, different printing machine mesh mesh line number Angle has a big difference, which makes the same ink, in different printing methods ...
Acrylic pressure sensitive adhesive is a large range, PUR is one of them, most of the acrylic pressure sensitive adhesive is heated operation, can be reheated after bonding, is reversible.And PUR is wet reaction acrylic pressure sensitive adhesive, heating operation, after bonding and moisture in the air reaction, after the reaction is irreversible (that is, heating will not melt). So PUR is more ...
◆ The procedure of bonding process:◆ The adhesive surface should be evenly coated to ensure infiltration, as far as possible to avoid bubbles, due to the porosity of the adhesive strength greatly reduced, resulting in degumming.Attention should be paid to the alignment of the position, not staggered, can be pressurized, air exclusion, make it close contact. Time is three important parameters of cu...
The chemical composition of glue, the polymer in the water environment glue (vinyl acetate in white glue is a kind of petroleum derivatives) are round particles, the radius of the general particle is between 0.5~5μm.The bonding of objects is achieved by the tension between the polymers in the glue.In the glue, water is the carrier of the polymer, and the water carries the polymer slowly into ...
Composition of pressure sensitive tape 1.Pressure sensitive adhesive, 2.substrate 3.Primer 4.Back treatment agent 5.Isolation paper The main components of the pressure sensitive adhesive and resin, including rubber such as polyacrylic acid ester or polyvinyl ether, homogeneous base material requirements, small scale and good to solvent invasive, including, (1) fabric such as cotton, glass cloth or...
Surface treatment of metal materials 1)metal material surface degreasing: organic solvent degreasing alkali degreasing electric degreasing ultrasonic degreasing 2)metal material surface derusting 3)Activation treatment of metal surface 4)Metal surface sandblasting treatment: increase the surface roughness Surface treatment of non-metallic materials 1)Mechanical treatment: sandpaper grinding, etc 2...
First, pour the glue on the flat glass to observe its rheology, and wiggle it to observe its rheology,If the flow of glue is too fast, it means that the glue is too thin and poor, and too thick is not conducive to bonding. Secondly, with a hand dip to observe its viscosity if you can slowly draw, a little sticky hand is better. Then, pour it on a small piece of glass to observe its film forming ti...
The bonding effect can be achieved by applying pressure for a short time (non-aqueous solvent heating) It overcomes the solvent volatilization and drying time needed during the operation of structural adhesive, and can improve the working environment After stripping, it can be corrected without contamination and can be reused for many times Easy to operate, can greatly improve the production effic...
1.Permanent and removable options In terms of the performance of adhesives, they can be divided into two categories: permanent adhesives and removable adhesives.(Permanent is generally used in electronic machinery, such as electronic label, typical: mobile phone battery label, removable is generally used in food, personal care, such as: wet wipes label, fruit label, clothing label, etc.) 2.The sur...
Water-based adhesive is a one-component pressure sensitive adhesive of self-crosslinking acrylic ester at room temperature. It has adhesion to wood, PVC, metal, glass board and so on. It is suitable for wood skin, OPP tape, double-sided tape, aluminum foil tape and self-adhesive trademark paper. performance index Composition: acrylic polymer Solid composition: 55% 2 Viscosity: 6000 CPS/25 Crosslin...
Polyurethane sealant is widely used in civil construction, transportation and other industries: Applications in construction - filling and sealing of doors and Windows, glass, etc.; Applications in civil engineering - caulking sealing of expressways, Bridges and airstrips; Automotive applications - Assembly and sealing of Windows (mainly windshield). Polyurethane sealant has many excellent charact...
Product character Appearance：Milky white or dark blue gelatinous liquid Solid content : ≥41% PH: 7.0 to 8.0 Viscosity: 1200 ~ 1800 (MPA.s) Performance characteristic 1.Strippable protective coating is made of waterborne polyurethane, weather resistance 24 months, ice resistance, acid and alkali resistance. 2.Water based formula, odorless and tasteless, free of heavy metals and ...
The peeling protective coating is a liquid protective coating made of waterborne polyurethane, which can be sprayed on the surface of automobiles, furniture, electrical appliances and other objects as a protective coating.It has good formativity, can in complex shape surface to form a layer of continuous, uniform stick, strength, transparent protective coating, no need baking, room tempe...
The use of flocking glue is different from that of ordinary glue. General flocking process can be divided into three kinds: 1. Flocking box, according to the need of flocking products make it the size of the corresponding flocking box, then placed in the flocking box of villi, connected to the power supply, make the flocking box to form a strong magnetic field, when the product from the side wear ...
Home textiles Flocking sand release fabric pattern unique, rich color, soft breathable, especially in winter than leather sofa warmer and more comfortable.Electrostatic flocking cloth bed cover has a three-dimensional sense, full of characteristics, electrostatic flocking curtain color, texture thick, soft, shading from sunlight.Color pattern of flocking wallboard can be designed at will according...
Water-based adhesives have various kinds and different properties, which can adapt to the trend of environmental protection. The important properties of water-based adhesive are: solid content (non-volatile mass percentage), viscosity, emulsifier or surfactant total agent dosage, surface tension, pH value, particle size and distribution, film forming temperature, mechanical stability, etc.Com...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية