Categories
new blog
What is a peelable resin? Strippable resin is a special resin material with strippable properties (also known as removable film resin). It is often used in the preparation of protective films for electronic products, packaging of semiconductor devices, etc., which can protect these products more intact, and it is easy to peel off when it needs to be replaced or disassembled. When prepari...
Protective film resin Automobile coating resin High resilience waterborne polyurethane resin 1.Typical properties Appearance： Milky white liquid Protective film resin Automobile coating resin Ph： 7.0-9.0 Automobile coating resin Solid content： 40±1% Charge： Anionic High resilience waterborne polyurethane resin Viscosity (25℃)： 300-800cP Elongation (%)： >200...
1.There are many formulations of coated glue, and different formulations need to be determined according to the specific use. It generally includes basic glue, thickener, curing agent, auxiliaries and other ingredients. 2.Basic glue is the most important component of laminating glue, it can be selected according to different use requirements of different types, such as water-based, oily, dilu...
The performance requirements of water-based varnish for printing paper glazing are as follows: 1.The film has good environmental resistance. Some of the printed matter after glazing is used to make all kinds of packaging cartons, in order to be able to play a good protective effect on the packaged products, the environmental resistance of the glazing film layer must be better. For example, the pac...
"If there are small bubbles in the complex, opaque and foggy, it will not only affect the appearance quality, but also affect the peeling strength of the complex, reducing it, which is a very bad phenomenon." 1.The surface tension of the base film is too small, the infiltration is poor, the glue is not uniform, and the space without glue is empty and bubbles are generated. The solution is to use a...
Ink scraping is not clean troubled many manufacturers, there are ten reasons for scraping is not clean, save it for use! 1.Ink viscosity is too high When the viscosity of the ink increases, the surface tension also increases correspondingly, and the force between them also increases, so that the scraper will increase the impact force of the ink on the scraper in the contact process with the ink, d...
Different processing methods will cause different fault manifestations, the following we mainly analyze the causes of paper thermit sealing delamination phenomenon under the gravure and solvent-free composite processing methods. The YBB paper aluminum-plastic composite film standard does not specify the composite strength index of the paper aluminum layer in the paper aluminum-plastic composite fi...
PET label primer Cost-effectively improve the printability of PET labels Excellent adhesion with PET label substrate Good affinity with all kinds of ink Good weather resistance, no yellowing Easy to use, safe and environmentally friendly PET label primer is a water-based coating designed to improve the printability of PET label paper with advanced material technology and formulation technology. Du...
The OPP,PET film substrate | is an environmentally friendly coating using advanced material technology, which can significantly enhance the adhesion of EVA on difficult PET substrates and improve the product quality of PE card film. Card film, also known as plastic film, is a plastic film product coated with adhesive and OPP and PET as the substrate, which is widely used in the storage and protect...
Paper aluminum-plastic composite film in the actual application of medical packaging powder, granule packaging products compared to the plastic aluminum-plastic packaging commonly used in the market now has the following advantages: (1)The mechanical strength of the paper is high, the rigidity is good, and the ability to maintain the bag after forming is strong, which improves the cleanliness of t...
In the process of UV flexographic printing, the viscosity of the ink is one of the key factors that affect the printing quality and effect. Choosing the right viscosity UV flexographic ink is crucial to ensure printing quality and efficiency. When adjusting viscosity, it is usually necessary to consider many factors such as printing equipment, printing materials, image details and the expected pri...
The main reason for water-based ink drying 1.Water-based ink: water-based carton ink, non-woven ink, paper towels, paper cups and paper bags and other packaging printing; 2.Water-based polishing oil series: water-based polishing oil, polishing oil, high gloss, wear-resistant, matte, waterproof, antifreeze and other environmental protection water-based products. Water-based ink drying is mainly cau...
First, resin reaction temperature standard The reaction temperature of resin is an important process parameter, which has great influence on the reaction rate, physical properties and chemical stability of resin. In general, the resin reaction temperature should be determined according to different resin types and catalyst types. The following are some commonly used resin reaction temperature stan...
water base varnish for glass Does not contain benzene, esters and other harmful solvents, does not contain free TDI, does not burn, is the latest environmental protection glass process paint, by the international and other authoritative verification institutions assessed as the real green environmental protection products. Solve problems It is required to blister at 75℃ for 30 minutes and it is re...
Coupling agents have always been an amazing additive Coupling agents, also known as surface modifiers, are a special type of additive that Coupling agents, also referred to as surface modifiers, are a particular type of additive that is dedicated to optimizing the interfacial characteristics among the adhered substrate, fillers, and polymeric materials, significantly enhancing the binding for...
The method of using silane coupling agent mainly includes pretreatment method and integral blending method. When using silane coupling agent, it is necessary to choose the appropriate method and conditions according to the specific situation. At the same time, it is also necessary to pay attention to the amount and time of use of silane coupling agent to ensure that it can play the best ...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية