Categories
new blog
Wood coating process 1.There are many large holes in the hard wood, putty or hole adding agent to flatten; 2.Apply closing primer after hole filling； 3.If you need to deepen the surface texture of the wood and highlight the wood grain, you can apply the closed primer and apply the water color； 4.After conditioning the wood grain, apply two closed primer； 5.Finish with top coat. Sinograce Chemical ...
1.The tool Before using the soft brush, thoroughly soak it in clean water, remove excess water, and do not drip. The enamel paint should only reach half the length of the bristles.Brush as fast as possible, gently and smoothly brush the wood grain, do not apply it back and forth repeatedly, because the water-based paint is fast drying and the opening time is short, so it should be completed as soo...
3.Process variations of different paint types-Waterborne wood paint application process 2 Applying a matt lacquer to the varnish can change the coating to a matte finish, while applying a varnish to a matt lacquer reduces the brightness of the film and does not achieve maximum brightness and transparency. The color paint of waterborne wood lacquer can be divided into two types: coloured coating an...
1.Paper-based coating resins have been switched from natural water-based resins such as celluloses to synthetic resin emulsions such as carboxystyrene butadiene emulsions, polyvinyl acetate emulsions, and acrylic emulsions, among which acrylic emulsions have more excellent properties.However, the above resins are still difficult to meet the higher requirements for the development of coated paper. ...
In February 2020, during the severe situation of covid-19, Sinograce Chemical company dared to assume social responsibilities and made a modest contribution to the fight against covid-19. It donated alcohol and 84 disinfectant and other epidemic prevention materials to hefei primary and secondary schools and universities for daily disinfection of schools, with a total of 10 tons of 84 di...
Water-based wood lacquer can be used to apply. The characteristics of the brush method is simple, easy to master, fast coating speed, and can eliminate the brush method commonly seen bubbles and brush marks and other shortcomings. This is because the paint left on the surface of the wood is very thin and the pressure of the brush is high, which makes the air in the wood grain and micro hole easy t...
Functions of antifogging coating: 1 Super hydrophilic self-cleaning function:anti-fogging coating also uses super hydrophilic silicon oxide film to form a super hydrophilic film between the painted surface and dirt, so that dirt and coated surface separation and the use of natural rain wash away the stolen goods under the action of gravity, to achieve the purpose of self-cleaning. 2 Antistatic fun...
Water based wood lacquer is mainly made of waterborne acrylic acid and polyurethane and refined by strict production process standards. It is suitable for the protection of indoor wood and wood products, and can play the role of decoration, protection and service life extension.Waterborne wood lacquer uses water as diluent, does not contain benzene and other harmful substances, non-toxic...
Printing mucilage requirements The requirements of printing mucilage for manual plate printing Manual table printing is to press the screen on the fabric of the table for manual scraping, and the pressure extrusion on the scraper will print the glue through the mesh hole of the pattern part to the fabric. The shear stress of the binder is small, so thePrinting mucilageis required to have good...
PCL is a fully degradable polymer with good biocompatibility. When introduced into waterborne polyurethane, it can make waterborne polyurethane have shape memory.Shape memory waterborne polyurethane has attracted wide attention for its shape memory function, temperature sensitivity and moisture permeability. PCL3000 PCL4000 was used as the soft segment, and toluene diisocyanate was used as the har...
With the development of The Times, many products in the production of nano coating, the coating can be very good protection from water and air substances invasion, the use of nano coating can obtain what characteristics, let us know about it. 1.Features The hardness of the coating is extremely high, which is more than 3 times that of tool and die steel, even more than 4000HV(ceramic characteristic...
What is nano coating? What are the advantages? Nano paint is a new high-tech coating, is the nano raw materials and coating material, in addition to add silicon oxide single slurry nano technology emulsion nano technology pesticides fungicide and other modifiers.The metope paint with relative tradition not only lacquer face is meticulous and extraordinary, and price also is cost-effective.The meto...
The bonding effect can be achieved by applying pressure for a short time (non-aqueous solvent heating) It overcomes the solvent volatilization and drying time needed during the operation of structural adhesive, and can improve the working environment After stripping, it can be corrected without contamination and can be reused for many times Easy to operate, can greatly improve the production effic...
Waterborne polyurethane is often used in the preparation of waterborne coatings because of its excellent film formation and adhesion, excellent flexibility and wear resistance.However, water-based polyurethane dispersion contains a lot of surfactant, easy to produce bubbles, and because of the special properties of water-based polyurethane, it is necessary to use the characteristics of water-based...
Waterborne Acrylic Resin Product Description: The water-based acrylic resin is made of acrylic acid and acrylate monomer through solution polymerization. Product purpose: This product can be used for water-based aluminum foil gloss and ink, water-based gravure printing paper gloss and ink, water-based carton ink manufacturing Product features:alcohol water as the main solvent, has no smell, no tox...
Pigment is a white or colored fine powder substance which is generally insoluble in water, oil and solvents (some pigments are soluble), but can be evenly dispersed in water.Pigment and film forming material solution mixed on the surface of the material, can form a covering ability of various colors of the paint layer in wood products coating or finishing process, pigment has three functions. It i...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية