Categories
new blog
3.Process variations of different paint types-Waterborne wood paint application process 2 Applying a matt lacquer to the varnish can change the coating to a matte finish, while applying a varnish to a matt lacquer reduces the brightness of the film and does not achieve maximum brightness and transparency. The color paint of waterborne wood lacquer can be divided into two types: coloured coating an...
After the ink is transferred to the printing surface by the blanket at a certain printing speed and under a certain printing pressure, the fixation and drying speed of the ink film, as well as the color, gloss, fastness and resistance after film formation, etc. ensure the printing effect, which are collectively referred to as the printing quality suitability of the ink. It mainly includes color, p...
The addition of wetting dispersant has obvious effect on the foam of some water-based ink.For example, polyacrylic acid wetting dispersants foam more than other types of wetting dispersants.Generally speaking, wetting dispersant foam with low dispersion capacity is also less. If diisobutyl sulfonate is based on disate, there is little foam at its content of 0.1-0.25%. The use of thickeners will ma...
The preparation of ink is an important work in the color printing process, which is directly related to the printing quality of the product. Because the color is bright and the brightness is good, the hue is accurate is the basic requirement of the color printing products, to achieve this requirement must first accurately deploy the printing ink. Therefore, the operator must master the color knowl...
The allocation of ink hue is an important work before printing, and it is also a very abstract work.Simple color materials three primary colors, yellow, magenta, green can be deployed into red, orange, yellow, green, blue, purple and other dozens of colors. In the actual deployment process, only by the three primary colors of ink can not get the required color, this is because the ink manufacturer...
There are four common waterborne polyurethane thickeners: ①Inorganic thickeners, such as flake silicates, fumed silica, etc.; ②Natural organic thickeners, such as cellulose ethers; ③Synthetic organic thickeners, such as polyacrylates, polyvinylpyrrolidone; ④associative thickener. This paper mainly introduces the associated emulsion thickener. Associative emulsion thickeners are non-ionic synthetic...
Ink resin is the pigment carrier in the ink, is the core material of the ink, its quality is good or bad, will directly affect the performance of the ink, because the connection material to a large extent determines the viscosity of the ink, viscosity, dryness, fluidity and other properties. Color fastness The adhesion between the ink and the substrate mainly includes the chemical bond force ...
Anti-viscosity is an important physical property index of printing ink.Gravure printing is a kind of printing method with high ink supply, good reproducibility and fast printing speed. Most of the inks used are solvent-based volatile drying inks.After the ink is transferred to the substrate through the printing plate, it passes through the drying channel, and the organic solvent is quickly volatil...
The resins that can be used for water-based gravure inks are acrylic resin, polyurethane resin, alkyd resin, etc. Each resin has different characteristics and application occasions, and needs to be selected according to the actual situation. First, water-based gravure ink overview Water-based gravure ink is an environmentally friendly ink, compared with traditional ink, its volatility is small, no...
1.Ink The three primary color inks have different degrees of color bias, which will affect the color bias of the whole picture to different degrees. However, a small amount of color bias can be corrected from the ink preparation. When printing to grasp the gray balance of the ink used, the same amount of yellow, product, green do not produce neutral gray, they produce lighter, more turbidity with ...
Most coatings are composed of a base material (one or more resin mixtures), pigments (including physical pigments and functional pigments), solvents and some small amounts of additives and other coating raw materials. In the production of coatings, after the selection of various coating raw materials necessary for coating components, the next is how to make reasonable use of the technical and econ...
The grinding fineness of paint is one of the important qualities of color paint, which has a great impact on film forming quality, film gloss, durability, storage stability of paint, etc., and is one of the routine testing items of paint production. The fineness of the paint refers to the size of the particle size or the uniformity of the dispersion of the pigment or the bulk pigment, and the unqu...
The main reason for water-based ink drying 1.Water-based ink: water-based carton ink, non-woven ink, paper towels, paper cups and paper bags and other packaging printing; 2.Water-based polishing oil series: water-based polishing oil, polishing oil, high gloss, wear-resistant, matte, waterproof, antifreeze and other environmental protection water-based products. Water-based ink drying is mainly cau...
1
adminpages
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية