Categories
new blog
As we all know, printed laminating is one of the surface decoration processing technology of printed matter, which is the auxiliary process of printing. It is the plastic film bonded together with the printed matter through the adhesive to improve the surface gloss, strength and aesthetic effect of the printed matter, so as to make it water resistant and wear resistant, which is an effective means...
Composite film manufacturer there are bubbles and spots in the composite film, what is the cause? There are many factors in this kind of situation, and the actual situation needs to be analyzed in detail. The basic elements commonly used to produce bubbles and spots are: 1, environmental factors such as dust and suspended matter interference, which requires a good environmental health area environ...
In daily life, we will use glue in many places, and we often see the figure of water-based glue. If you say you can't remember where you used glue, look at street posters, advertisements, and alley shoe repairmen.We usually use glue in class or work to stick some paper, bills and so on. It can be said that water-based glue has always been around us. In addition, water-based adhesives have also bee...
According to the different raw materials and equipment, the coating process can be divided into two kinds of coating process and pre-coating process. That is to say, the film used in the coating process is now coated, and the adhesive used is generally solvent-based and emulsion type, prepared according to need. However, the film used in the pre-coating process is pre-coated, and the adhesive used...
Whether the water-based film adhesive meets the quality requirements of composite products, in addition to the quality of the glue itself, but also related to the paper, film, equipment accuracy, operating experience and other supporting factors in the film coating process, after long-term practice, we summarized the common problems in the application of water-based film adhesive, and put forward ...
According to the different raw materials and equipment, the coating process can be divided into two kinds of coating process and pre-coating process. That is to say, the film used in the coating process is now coated, and the adhesive used is generally solvent-based and emulsion type, prepared according to need. However, the film used in the pre-coating process is pre-coated, and the adhesive used...
Aluminized film glue is a composite material that binds aluminum film and other materials together by glue. It is usually used in paper packaging to prevent moisture, oxidation, heat insulation and pollution. First of all, the aluminized film glue can effectively prevent the paper from absorbing moisture and oxygen in the air, thereby maintaining the dryness and freshness of the product and extend...
As a kind of widely used adhesive, coated adhesive has a variety of processes. Here are some of the common processes used: 1. Hot melt coating: hot melt coating is to place a layer of film on the surface of the print, and then through hot pressing the film and the print together.In this process, the laminating glue is heated to turn it into a liquid, which then forms a uniform coating between the ...
Brand :Sinograce Type: Water base adhesive Appearance：Milky white emulsion with blue light Performance and use:This product is suitable for the coating of BOPP film, PET film and printed color paper (dry coating process). High bonding q degree, large tension compound drying speed, good parallel flow; For gold and silver cardboard, single powder paper bonding q degree, tension q, to avoid the...
Water-based coating adhesive is a product based on water-based environmental protection emulsion system, which is mainly used in the field of packaging and printing, and can firmly bond film materials to paper and other surfaces. Characteristics of water-based coating adhesive Fast dry ：Under the appropriate temperature and pressure conditions, the water-based coating adhesive will dry quickly and...
Laminating glue is currently a kind of strong glue widely used in the market, so what is the application processing process of laminating glue? The application processing technology of laminating glue is as follows: 1, the composite method is dry composite, that is, the coating machine should use a dry composite machine with curing furnace and composite roller heating. 2, curing furnace ambient te...
What is a peelable resin? Strippable resin is a special resin material with strippable properties (also known as removable film resin). It is often used in the preparation of protective films for electronic products, packaging of semiconductor devices, etc., which can protect these products more intact, and it is easy to peel off when it needs to be replaced or disassembled. When prepari...
Protective film resin Automobile coating resin High resilience waterborne polyurethane resin 1.Typical properties Appearance： Milky white liquid Protective film resin Automobile coating resin Ph： 7.0-9.0 Automobile coating resin Solid content： 40±1% Charge： Anionic High resilience waterborne polyurethane resin Viscosity (25℃)： 300-800cP Elongation (%)： >200...
As an important material for printing, ink is composed of resin, pigment, filler and auxiliary. Due to many industries such as books, packaging, construction, and circuit boards, with the gradual increase in social demand, the use of ink is also increasing. However, in the production and use of ink, due to the addition of surfactants, equipment stirring operation and environmental changes will cau...
1.There are many formulations of coated glue, and different formulations need to be determined according to the specific use. It generally includes basic glue, thickener, curing agent, auxiliaries and other ingredients. 2.Basic glue is the most important component of laminating glue, it can be selected according to different use requirements of different types, such as water-based, oily, dilu...
The transparency of composite film is very high, but in the composite processing of plastic film, the composite film often has problems such as insufficient transparency. So, what is the reason for affecting the transparency of the composite film? This article analyzes one by one for reference. Improper selection of adhesives: Such as the color of the adhesive itself is dark or the fluid...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية