Categories
new blog
After the composite product has been cured at a certain temperature and time, the interlayer peeling composite film adhesive layer still has a certain viscosity, that is, after the composite film peeling, the two-layer film will be re-glued together by hand, and the severe drying of the composite film adhesive layer will directly affect the peeling strength of the composite film, while the slight ...
I.Overview: Refilm process is widely used in all kinds of packaging, small to medicine box, artifact box, large to outer packing boxes and various product packaging.The current recoating technology includes precoating, dry recoating and wet recoating.Wet composite uses water-soluble adhesive cold paste process. Dry composite traditional composite film process is to apply solvent-based adhesive dir...
Water-based adhesive with high polymer, water-soluble resin as the main raw materials, water as the solvent, odor is small, environmental protection and non-toxic. With the continuous improvement of people's environmental awareness, water-based adhesives have become the mainstream of the market in recent years. In practical application, some packaging and printing manufacturers do not know enough ...
①BOPP / VMCPP The composite structure is mainly used in the field of light food packaging such as instant noodles, egg yolk pie and snow cake. The composite structure is most suitable for one-component aqueous adhesives. Compared with solvent-based polyurethane adhesive, single component water glue less ink transfer phenomenon, and the initial adhesion is high, without aging, can be directly cut b...
PET protective film material is transparent colorless, the surface after hardening treatment, the general PET protective film material according to the origin of different, the surface hardening value between 3H-4H, the better the surface hardening, the stronger the wear resistance. Light transmittance is also the main property of PET protective film materials, the general light transmittance is m...
Composition of adhesive Adhesives are adhesives that can bond two objects together, referred to as glue. There are different types of adhesives according to different divisions, the use of adhesives is also quite extensive, and now it has been filled in our lives, for adhesives, do you know how it is composed? How adhesives are composed: Synthetic adhesive Synthetic adhesive is composed of main ag...
Water-based pressure-sensitive adhesive is a type of adhesive that uses water as a solvent and is pressure-sensitive, that is, it can adhere quickly to the surface when slight pressure is applied. Due to its environmental protection, non-toxic, cost-effective, adjustable viscosity and other advantages, it has gradually become the mainstream product in the pressure sensitive adhesive market. Accord...
Depending on the coating material used, the type of coating is also different. PVDC coating, PVOH coating, silicon oxide (Si0x) coating, Acrylic (Acrylic) coating these four kinds of plastic coating characteristics and applications are introduced. According to the different coating materials used, plastic coating mainly has the following types: 01/PVDC coating PVDC emulsions can be coated in sever...
One,Overview Paper-plastic composite can make the surface of paper printed matter more bright, smooth and color more bright and full of three-dimensional sense, but also play a role in moisture, anti-fouling, anti-counterfeiting, folding resistance, wear resistance and so on.It has been widely used and rapidly developed in printing and packaging industry at home and abroad. The market demand for p...
With the rapid development of printing and packaging industry, the appearance design of products is becoming more and more high-end. The composite technology used in modern exquisite printing mainly includes: paper printing and plastic film composite and plastic printing and plastic film composite, that is, paper-plastic composite and plastic-plastic composite.As a new type of packaging material, ...
As we all know, printed laminating is one of the surface decoration processing technology of printed matter, which is the auxiliary process of printing. It is the plastic film bonded together with the printed matter through the adhesive to improve the surface gloss, strength and aesthetic effect of the printed matter, so as to make it water resistant and wear resistant, which is an effective means...
Composite film manufacturer there are bubbles and spots in the composite film, what is the cause? There are many factors in this kind of situation, and the actual situation needs to be analyzed in detail. The basic elements commonly used to produce bubbles and spots are: 1, environmental factors such as dust and suspended matter interference, which requires a good environmental health area environ...
According to the different raw materials and equipment, the coating process can be divided into two kinds of coating process and pre-coating process. That is to say, the film used in the coating process is now coated, and the adhesive used is generally solvent-based and emulsion type, prepared according to need. However, the film used in the pre-coating process is pre-coated, and the adhesive used...
Whether the water-based film adhesive meets the quality requirements of composite products, in addition to the quality of the glue itself, but also related to the paper, film, equipment accuracy, operating experience and other supporting factors in the film coating process, after long-term practice, we summarized the common problems in the application of water-based film adhesive, and put forward ...
According to the different raw materials and equipment, the coating process can be divided into two kinds of coating process and pre-coating process. That is to say, the film used in the coating process is now coated, and the adhesive used is generally solvent-based and emulsion type, prepared according to need. However, the film used in the pre-coating process is pre-coated, and the adhesive used...
As a kind of widely used adhesive, coated adhesive has a variety of processes. Here are some of the common processes used: 1. Hot melt coating: hot melt coating is to place a layer of film on the surface of the print, and then through hot pressing the film and the print together.In this process, the laminating glue is heated to turn it into a liquid, which then forms a uniform coating between the ...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية