Categories
new blog
The film-forming aids for waterborne wood coatings are generally alcohol ether type solvents. The most commonly used filming aids such as diethanol ethers, propylene glycol ethers and N-methylpyrrolidone have high and low boiling points.Water-based wood coatings in the summer construction, the water volatilization is faster, that is, the surface is relatively fast, some of the moisture may be encl...
Defoamer is one of the most difficult additives in waterborne wood coatings to control the balance between defoaming and leveling.The paint liquid will generate bubbles during the application due to agitation .If the bubbles present in the paint are not removed in time, the film will dry and form an unacceptable flaw.The paint also produces air bubbles during production, pumping and filling. Defoa...
Character Mineral oil Primer Matte Strong defoaming ability higher price Different product performance differences Large adjustment space Improper selection can cause film defects Influence gloss, flow equality Non-silicone non-oil Various types of coatings, especially in high gloss finishes There are many defoamers on the market, and the choices are very cautious and can be noted in several ways:...
Formulation design system for water based coatings - wetting leveling agent The wetting leveling agent can effectively reduce the surface tension of the system and significantly improve the construction effect of the waterborne wood lacquer.After the addition of the wetting leveling agent, the wetting property and permeability of the paint increase, the leveling property of the paint liquid is imp...
Waterborne paint formulation design system - pH regulator Waterborne wood coatings may also need to adjust the pH when necessary.Most emulsions or aqueous dispersions have been adjusted to a pH of 8 to 9 when they are produced, eliminating the need for pH adjusters when making paint.If the pH value is different, add 0.05% to 0.1% of the pH adjuster during the paint making process, and adjust the p...
Wood coating process 1.There are many large holes in the hard wood, putty or hole adding agent to flatten; 2.Apply closing primer after hole filling； 3.If you need to deepen the surface texture of the wood and highlight the wood grain, you can apply the closed primer and apply the water color； 4.After conditioning the wood grain, apply two closed primer； 5.Finish with top coat. Sinograce Chemical ...
Some surface properties of plastic substrate affect coating, and the properties related to coating mainly include the following aspects: Due to the characteristics of the plastic substrate itself, its smooth and compact, low surface energy is not conducive to the wetting and adhesion of the coating on the substrate. The crystallinity of the plastic affects the adhesion of the film, and its crystal...
The adhesion of the paint film is caused by the mutual attraction between the paint and the polar groups on the surface of the coated substrate, and the mutual attraction between the polar groups is based on the premise that the paint is well wetted on the surface of the coated substrate.Since the wet condition of the coating on the surface of the coated substrate depends on the surface tension of...
Sinograce Chemical - Jingangtai rafting trip On August 17th, Sinograce Chemical Marketing Center carried out the second quarter group building activities of the Rapids Warriors, blue sky and white clouds, green mountains and green waters, riding a rubber boat, leaping in the cool water, Sometimes light as a swallow, Now and then it gallops like a tiger, the event The thrills not only make the...
1.The tool Before using the soft brush, thoroughly soak it in clean water, remove excess water, and do not drip. The enamel paint should only reach half the length of the bristles.Brush as fast as possible, gently and smoothly brush the wood grain, do not apply it back and forth repeatedly, because the water-based paint is fast drying and the opening time is short, so it should be completed as soo...
3.Process variations of different paint types-Waterborne wood paint application process 2 Applying a matt lacquer to the varnish can change the coating to a matte finish, while applying a varnish to a matt lacquer reduces the brightness of the film and does not achieve maximum brightness and transparency. The color paint of waterborne wood lacquer can be divided into two types: coloured coating an...
1.Paper-based coating resins have been switched from natural water-based resins such as celluloses to synthetic resin emulsions such as carboxystyrene butadiene emulsions, polyvinyl acetate emulsions, and acrylic emulsions, among which acrylic emulsions have more excellent properties.However, the above resins are still difficult to meet the higher requirements for the development of coated paper. ...
In February 2020, during the severe situation of covid-19, Sinograce Chemical company dared to assume social responsibilities and made a modest contribution to the fight against covid-19. It donated alcohol and 84 disinfectant and other epidemic prevention materials to hefei primary and secondary schools and universities for daily disinfection of schools, with a total of 10 tons of 84 di...
Water-based wood lacquer can be used to apply. The characteristics of the brush method is simple, easy to master, fast coating speed, and can eliminate the brush method commonly seen bubbles and brush marks and other shortcomings. This is because the paint left on the surface of the wood is very thin and the pressure of the brush is high, which makes the air in the wood grain and micro hole easy t...
Functions of antifogging coating: 1 Super hydrophilic self-cleaning function:anti-fogging coating also uses super hydrophilic silicon oxide film to form a super hydrophilic film between the painted surface and dirt, so that dirt and coated surface separation and the use of natural rain wash away the stolen goods under the action of gravity, to achieve the purpose of self-cleaning. 2 Antistatic fun...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2026 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.
top
English
français
русский
español
العربية