Categories
new blog
1.There are many formulations of coated glue, and different formulations need to be determined according to the specific use. It generally includes basic glue, thickener, curing agent, auxiliaries and other ingredients. 2.Basic glue is the most important component of laminating glue, it can be selected according to different use requirements of different types, such as water-based, oily, dilu...
The performance requirements of water-based varnish for printing paper glazing are as follows: 1.The film has good environmental resistance. Some of the printed matter after glazing is used to make all kinds of packaging cartons, in order to be able to play a good protective effect on the packaged products, the environmental resistance of the glazing film layer must be better. For example, the pac...
Ink scraping is not clean troubled many manufacturers, there are ten reasons for scraping is not clean, save it for use! 1.Ink viscosity is too high When the viscosity of the ink increases, the surface tension also increases correspondingly, and the force between them also increases, so that the scraper will increase the impact force of the ink on the scraper in the contact process with the ink, d...
Different processing methods will cause different fault manifestations, the following we mainly analyze the causes of paper thermit sealing delamination phenomenon under the gravure and solvent-free composite processing methods. The YBB paper aluminum-plastic composite film standard does not specify the composite strength index of the paper aluminum layer in the paper aluminum-plastic composite fi...
PET label primer Cost-effectively improve the printability of PET labels Excellent adhesion with PET label substrate Good affinity with all kinds of ink Good weather resistance, no yellowing Easy to use, safe and environmentally friendly PET label primer is a water-based coating designed to improve the printability of PET label paper with advanced material technology and formulation technology. Du...
The OPP,PET film substrate | is an environmentally friendly coating using advanced material technology, which can significantly enhance the adhesion of EVA on difficult PET substrates and improve the product quality of PE card film. Card film, also known as plastic film, is a plastic film product coated with adhesive and OPP and PET as the substrate, which is widely used in the storage and protect...
Rubber mold, silicone mold, shoe mold, latex pillow mattress mold, anti-stick easy mold Teflon spray, good model flon coating, non-stick mold surface treatment process The role of mold coating Molds are common tools in the manufacturing industry and are used to make a variety of products. In order to capture the service life and production efficiency of the mold, people often coat the surface of t...
The most important difference between non-stick cookware and ordinary cookware is that the surface is coated with a layer of non-stick paint, and the Teflon non-stick cookware commonly used on the market is to coat the main raw material of fluorinated resin such as polytetrafluoroethylene coating on the metal surface such as aluminum, copper or iron, and through sintering. Properties of NI-PTFE co...
Classification of surfactant applications in coatings: According to the role of the classification, the coating industry used surfactants can be divided into the following categories: emulsifier, pigment surface treatment agent, pigment wetting dispersant, defoamer, levelling agent, anti-mold, fungicide, antistatic agent, brightening agent, slippery agent and so on. Application of surfac...
The final state of waterborne polyurethane is a solid film. During the process from emulsion to solid film, accompanied by the evaporation of water and the concentration of water dispersion, the latex particles are close to each other. Before the solid content reaches 74%, the dispersion particles can move in the continuous phase of water. Under the influence of water/air interfacial tension, the ...
Paper aluminum-plastic composite film in the actual application of medical packaging powder, granule packaging products compared to the plastic aluminum-plastic packaging commonly used in the market now has the following advantages: (1)The mechanical strength of the paper is high, the rigidity is good, and the ability to maintain the bag after forming is strong, which improves the cleanliness of t...
In the process of UV flexographic printing, the viscosity of the ink is one of the key factors that affect the printing quality and effect. Choosing the right viscosity UV flexographic ink is crucial to ensure printing quality and efficiency. When adjusting viscosity, it is usually necessary to consider many factors such as printing equipment, printing materials, image details and the expected pri...
First, water-based lotion Aqueous emulsion is a colloidal dispersion system with water as the continuous phase and oil or other non-aqueous substances as the dispersing phase. It is a stable dispersion system formed by tiny oil droplets coated with surfactants. Water-based emulsion has many significant advantages, such as its low viscosity, easy to brush, easy to clean, non-toxic and harmless. The...
The role of wax emulsion in various coatings, in the coating formulation, polyethylene wax emulsion can effectively improve the wear resistance of the paint film, the paint film is very smooth, effectively reduce the friction coefficient of the coating, play a non-adhesive role, but also improve the service life of the product. 1.Synthetic wax emulsion can improve the toughness of the coating: whe...
The grinding fineness of paint is one of the important qualities of color paint, which has a great impact on film forming quality, film gloss, durability, storage stability of paint, etc., and is one of the routine testing items of paint production. The fineness of the paint refers to the size of the particle size or the uniformity of the dispersion of the pigment or the bulk pigment, and the unqu...
The main reason for water-based ink drying 1.Water-based ink: water-based carton ink, non-woven ink, paper towels, paper cups and paper bags and other packaging printing; 2.Water-based polishing oil series: water-based polishing oil, polishing oil, high gloss, wear-resistant, matte, waterproof, antifreeze and other environmental protection water-based products. Water-based ink drying is mainly cau...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية