- 
                    Application of waterborne polyurethane in textile field
                    
                        - 2023-05-12 17:41:25
- admin
 Polyurethane is the short form of polyurethane (PU). It is a block polymer formed by addition polymerization. It is a polymer compound with flexible and elastic polyether or polyester as soft segment and rigid and hard carbamate as hard segment. It contains a considerable number of ammonia ester bonds. Waterborne polyurethane has been successfully applied in the textile printing and dyeing industr... 
- 
                    Improve the adhesion effect of water-based paint and ink on polypropylene (PP) material, high hardness and good water resistance adhesion enhancer
                    
                        - 2023-05-17 16:10:59
- admin
 Water-based adhesion enhancer Product introduction Water-based adhesion enhancer, a water-based chlorinated PP acrylic emulsion, used to improve the adhesion effect of water-based paint and ink on polypropylene (PP) material. Suitable for PP substrate, can do bottom, surface coating paint. Product specifications Composition: acrylic modified emulsion Appearance: Milky white viscous liquid Non-vola... 
- 
                    About water-based ink and oil-based ink
                    
                        - 2023-05-26 17:39:05
- admin
 Printing ink according to the plate type is mainly divided into relief ink, lithographic ink, gravure ink, screen printing ink four categories According to its own characteristics can be divided into two categories of water-based ink and oily ink So what is water - based ink and oil - based ink? What's the difference? Usually see a lot of books, albums and other paper printed matter are used ... 
- 
                    Adhesive increases effectiveness——TK series water-based viscosifying emulsion
                    
                        - 2023-06-01 17:52:56
- admin
 Water-based viscosifying emulsion plays a very important role in water-based acrylic pressure sensitive adhesive, which can improve the bonding strength and initial adhesion of pressure sensitive adhesive on high and low energy surfaces, so as to achieve the best balance point, and can improve the application range and grade of pressure sensitive products. Today, we will take you to understan... 
- 
                    Water based adhesive
                    
                        - 2023-06-03 17:27:49
- admin
 Water based adhesive Water-based adhesive refers to the water-soluble polymer dissolved into appropriate concentration of aqueous solution, or insoluble polymer dispersed into micro-particles (emulsion) in water with the help of surfactant in the general term of adhesives;In simple terms, adhesives made of materials that can be dispersed or dissolved in water are aqueous adhesives and are often re... 
- 
                    Guidelines for the use of surfactants in pesticides
                    
                        - 2023-06-08 17:20:36
- admin
 Surfactants are now used not only in herbicides but in all forms of pesticides. Surfactants can be used to make pesticide preparations that can not be used directly. As a pesticide additive applied to pesticides, it can not only improve the use effect of pesticides, but also reduce the amount of pesticides, reduce the impact of pesticides on the environment, and bring great benefits to agricultura... 
- 
                    Study on the application of waterborne polyurethane in textile finishing
                    
                        - 2023-06-09 16:10:44
- admin
 Environmental protection pressure has prompted some traditional solvent-based products to gradually withdraw from the market and replace them with water-based, high solid content, powder products, etc.Waterborne polyurethane, as an important member of waterborne products, is facing unprecedented development opportunities with its unique excellent properties.In addition to the leather industry, it ... 
- 
                    Mold Teflon coating Non-stick water based paint
                    
                        - 2023-06-16 17:45:02
- admin
 First: Teflon coating introduction Industrial Teflon coating is suitable for plastic rubber mold, ball mold, glove mold, latex mold, roller, conveyor belt, mechanical parts and other surface treatment, containing "FEP" and "PTFE" polytetrafluoroethylene ingredients with high-performance resin, divided into the bottom coating and surface coating a total of two layers, has the best anti-corrosion, h... 
- 
                    Application of water based adhesives in various composite structures
                    
                        - 2023-06-30 16:53:49
- admin
 ①BOPP / VMCPP The composite structure is mainly used in the field of light food packaging such as instant noodles, egg yolk pie and snow cake. The composite structure is most suitable for one-component aqueous adhesives. Compared with solvent-based polyurethane adhesive, single component water glue less ink transfer phenomenon, and the initial adhesion is high, without aging, can be directly cut b... 
- 
                    What are the causes of glue transfer in PET protective film?
                    
                        - 2023-07-01 16:26:26
- admin
 PET protective film material is transparent colorless, the surface after hardening treatment, the general PET protective film material according to the origin of different, the surface hardening value between 3H-4H, the better the surface hardening, the stronger the wear resistance. Light transmittance is also the main property of PET protective film materials, the general light transmittance is m... 
- 
                    Acrylic emulsion adhesive has excellent properties
                    
                        - 2023-07-06 15:51:23
- admin
 1.Water as a dispersion medium, do not use organic solvents, non-toxic or flammable danger, is environmentally friendly products; 2.Acrylic monomers have many types, containing ester groups, carboxyl groups, hydroxyl groups and other functional groups have strong polarity, it is easy to emulsion copolymerization with other monomers such as vinyl acetate, styrene, vinyl chloride, etc., to make emul... 
- 
                    The primer sprayed on the plastic surface can promote the adhesion between the glue and the material
                    
                        - 2023-07-12 18:00:45
- admin
 The primer sprayed on the plastic surface can promote the effective adhesion between the glue and the material, increase the adhesion between the adhesive and the plastic, and solve the problem of degumming, and the main role of the primer is to solve the problem of degumming in the adhesive process. One: The definition of primer? The base coating agent is a base coating treatment agent that assis... 
- 
                    The structure of the adhesive tape and the main adhesive type characteristics
                    
                        - 2023-07-15 17:26:32
- admin
 The composition structure of pressure sensitive tape Under normal circumstances, the composition of single-sided tape structure is: the release of the substrate, adhesive. The following image: Categories of adhesives and their respective properties The main adhesives are acrylic rubber, natural rubber, synthetic rubber, silicone and so on. For different application requirements, coating on the est... 
- 
                    The technical performance of adhesive has several aspects
                    
                        - 2023-07-28 17:50:56
- admin
 Although the adhesive is only the supporting material in the building decoration, it does not mean that it is not important.A large number of materials in the actual decoration (such as wallpaper, all kinds of flooring, ceramic, stone decoration materials, etc.) are laid by pasting method, so the choice of appropriate adhesive directly affects the firmness of the laying, but also affects the decor... 
- 
                    Sustainable and efficient adhesive solutions for tape
                    
                        - 2023-07-29 17:16:51
- admin
 Specialty tapes have a variety of uses, such as automotive, construction and medical. Each application has different requirements, and for the tape industry, we have developed polymer dispersions for different specialty tape pressure-sensitive adhesive coatings, direct coating adhesive formulations and UV curable acrylic hot melt adhesives.From polymer design to odor removal technology, we focus o... 
- 
                    Composition of adhesive
                    
                        - 2023-08-04 17:21:48
- admin
 Composition of adhesive Adhesives are adhesives that can bond two objects together, referred to as glue. There are different types of adhesives according to different divisions, the use of adhesives is also quite extensive, and now it has been filled in our lives, for adhesives, do you know how it is composed? How adhesives are composed: Synthetic adhesive Synthetic adhesive is composed of main ag...