Categories
new blog
The adhesive not only needs it to stick firmly, but also needs long-term viscosity, the effect of the adhesive is better, if it can not be sustained, after a period of time it will fall off, or for some reason, the viscosity will decline, so we sometimes need to think of some ways to ensure the durability of the viscosity. Research work and experience have shown that adhesives can bond things by i...
The amount of glue applied is insufficient or uneven Insufficient or uneven amount of glue due to insufficient amount of glue produced by the white spot can be observed in the composite machine. In the dry composite process, the coated adhesive must be able to fill the bumps and bumps on the surface of the ink and film to avoid appearance defects such as obvious white spots.When the water-based ad...
With the rapid development of printing and packaging industry, the appearance design of products is becoming more and more high-end. The composite technology used in modern exquisite printing mainly includes: paper printing and plastic film composite and plastic printing and plastic film composite, that is, paper-plastic composite and plastic-plastic composite.As a new type of packaging material, ...
As we all know, printed laminating is one of the surface decoration processing technology of printed matter, which is the auxiliary process of printing. It is the plastic film bonded together with the printed matter through the adhesive to improve the surface gloss, strength and aesthetic effect of the printed matter, so as to make it water resistant and wear resistant, which is an effective means...
First, the print composite bond is poor 1.Check whether the printed matter itself belongs to special paper; 2.Whether the printing ink is caused by excessive auxiliary materials or special ink; 3.Small amount of glue; 4.Low temperature or small pressure of hot press roller; 5.BOPP membrane corona is processed Second, the brightness of printed matter is poor after composite 1.Printed matter itself,...
In daily life, we will use glue in many places, and we often see the figure of water-based glue. If you say you can't remember where you used glue, look at street posters, advertisements, and alley shoe repairmen.We usually use glue in class or work to stick some paper, bills and so on. It can be said that water-based glue has always been around us. In addition, water-based adhesives have also bee...
There are many factors affecting the quality of the film, in addition to paper, ink layer, film, adhesive and so on In addition to the objective factors, it is also affected by subjective factors such as temperature, pressure, speed, and glue amount. If these factors are not handled well, various laminating quality problems will occur. There are snowflakes on the product 1.The amount of glue is to...
With the progress of science and technology, the printing technology industry is also developing rapidly, and more and more adhesives are used in the packaging and printing industry, and more and more varieties are also available. The film coating process is widely used in a variety of packaging, small to medicine boxes, crafts boxes, large to outer boxes and various product packaging. Some coatin...
In the actual operation of our manufacturer, whether the laminating products can normally complete the factory and meet the requirements of customers, in addition to the quality of the laminating glue itself, it is also related to the supporting factors such as paper, film, equipment accuracy, environment, and operating experience in the composite process. Often in some small details, it will caus...
Whether the water-based film adhesive meets the quality requirements of composite products, in addition to the quality of the glue itself, but also related to the paper, film, equipment accuracy, operating experience and other supporting factors in the film coating process, after long-term practice, we summarized the common problems in the application of water-based film adhesive, and put forward ...
Common problem Cause Solution The middle part of the compound bubbles Add dry oil when brushing Dry and then recombine The amount of glue is too small Increase glue Film or print surface contamination or excessive dusting Dedusting The overflow on the surface of the rubber roller is not removed, causing the mucous membrane to empty Cleaning glue roller The pressure is too small, and the ...
In the post-press process of the printing and packaging industry, the film improves the brightness of the printed matter and enhances the water resistance. It provides a beautiful visual effect for people's life. With the continuous emergence of various processes, equipment and glues, there have been some new trends in post-press coating. First, the proportion of water-based coating is increasing,...
Coated adhesive is generally used in the field of printing, processing the surface of the printed matter, so as to improve the gloss of the printed matter, and play a certain protective effect on the printed matter, coated adhesive refers to the BOPP film on the paper of a kind of glue. Divided into oil-based laminating glue and water-based laminating glue, water-based laminating glue is widely us...
As a kind of widely used adhesive, coated adhesive has a variety of processes. Here are some of the common processes used: 1. Hot melt coating: hot melt coating is to place a layer of film on the surface of the print, and then through hot pressing the film and the print together.In this process, the laminating glue is heated to turn it into a liquid, which then forms a uniform coating between the ...
There are many factors affecting the quality of the film, in addition to paper, ink layer, film, adhesive and so on In addition to the objective factors, it is also affected by subjective factors such as temperature, pressure, speed, and glue amount. If these factors are not handled well, various laminating quality problems will occur. There are snowflakes on the product 1.The amount of glue is to...
There are many factors affecting the quality of the film, in addition to paper, ink layer, film, adhesive and so on In addition to the objective factors, it is also affected by subjective factors such as temperature, pressure, speed, and glue amount. If these factors are not handled well, various laminating quality problems will occur. There are snowflakes on the product 1.The amount of glue is to...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية