Categories
new blog
Labels, as they are called in the printing industry, are mostly printed materials used to identify the relevant instructions of their products, and most of them come with glue on the back. But there are also some printing without glue, can also be called labels. Glue label is colloquially known as "sticker label". Label base material classification Substrate application surface material paper...
Self-adhesive refers to paper, film or other special materials as fabric, coated with adhesive on the back, a composite material printed with silicon protective paper as the base paper, the reason for the rapid rise of self-adhesive in recent years, because it is very practical, and very convenient, the cost is not high, the following to tell you about a few small knowledge of self-adhesive printi...
Water based adhesive for a more sustainable bond The market share of water-based adhesives is becoming increasingly large as development has shifted towards increasingly sustainable solutions that support health and safety and reduce environmental impact.Water-based adhesives are an excellent alternative to solvent-based systems because they do not contain any volatile organic compounds (VOC), are...
Adhesive label is a representative pressure sensitive adhesive product which coexists with adhesive tape for packaging. Its wide range of uses, such as: food, cosmetics, drugs and other use of senior beautiful label; Quality marking labels for fiber products, electronic machines, daily necessities, etc.; A price tag used in a supermarket or grocery store; Computer tags for schools, hospitals and o...
Self-adhesive labels are ubiquitous in our daily life, and are necessary consumables for many manufacturers. However, the warping Angle of self-adhesive labels has been troubling many manufacturers. A small warping Angle will directly affect the beauty of the products, leading to their own products are not favored from the visual point of view. So, why will self-adhesive warping Angle? How to deal...
After the composite product has been cured at a certain temperature and time, the interlayer peeling composite film adhesive layer still has a certain viscosity, that is, after the composite film peeling, the two-layer film will be re-glued together by hand, and the severe drying of the composite film adhesive layer will directly affect the peeling strength of the composite film, while the slight ...
"Non-stick pan" is a very common pot in the kitchen, because in the process of using less oil consumption, less smoke, but also not easy to paste the problem, so it is welcomed by many people. In recent years, however, there have been more and more controversies about non-stick pans: Some people think that non-stick coating will produce toxic substances, can not be used for a long time; Some peopl...
Water-based adhesive with high polymer, water-soluble resin as the main raw materials, water as the solvent, odor is small, environmental protection and non-toxic. With the continuous improvement of people's environmental awareness, water-based adhesives have become the mainstream of the market in recent years. In practical application, some packaging and printing manufacturers do not know enough ...
ater Based Polyurethane Peelable Protective Coating PU-207 is a protective resin made of waterborne polyurethane base material with advanced technology. The water-based peeling paint made from this is bright in color, fine and uniform in particle size, coating on the surface of automobiles, furniture, electrical appliances and other objects as a protective coating, has good protecti...
Application Acrylic emulsion is a kind of emulsion with wide applicability for construction. It can be used as a new chemical material for repairing steel structure concrete of hydraulic construction, port construction, highway, bridge, metallurgical chemical industry (urea chloro gangue) and other industrial civil buildings, such as seepage prevention, corrosion prevention and antifreeze. Cl...
In nylon, PP and other plastics and metal substrate painting and bonding process of the industrial surface treatment industry, the role of the base coating agent is equivalent to the auxiliary additives. In the painting process to improve the combination between the paint and the substrate, the bonding process is to cooperate with the adhesive, improve the adhesion of the adhesive or glue to the s...
Polyurethane is the short form of polyurethane (PU). It is a block polymer formed by addition polymerization. It is a polymer compound with flexible and elastic polyether or polyester as soft segment and rigid and hard carbamate as hard segment. It contains a considerable number of ammonia ester bonds. Waterborne polyurethane has been successfully applied in the textile printing and dyeing industr...
Water-based adhesion enhancer Product introduction Water-based adhesion enhancer, a water-based chlorinated PP acrylic emulsion, used to improve the adhesion effect of water-based paint and ink on polypropylene (PP) material. Suitable for PP substrate, can do bottom, surface coating paint. Product specifications Composition: acrylic modified emulsion Appearance: Milky white viscous liquid Non-vola...
The addition of wetting dispersant has obvious effect on the foam of some water-based ink.For example, polyacrylic acid wetting dispersants foam more than other types of wetting dispersants.Generally speaking, wetting dispersant foam with low dispersion capacity is also less. If diisobutyl sulfonate is based on disate, there is little foam at its content of 0.1-0.25%. The use of thickeners will ma...
Printing ink according to the plate type is mainly divided into relief ink, lithographic ink, gravure ink, screen printing ink four categories According to its own characteristics can be divided into two categories of water-based ink and oily ink So what is water - based ink and oil - based ink? What's the difference? Usually see a lot of books, albums and other paper printed matter are used ...
First: Teflon coating introduction Industrial Teflon coating is suitable for plastic rubber mold, ball mold, glove mold, latex mold, roller, conveyor belt, mechanical parts and other surface treatment, containing "FEP" and "PTFE" polytetrafluoroethylene ingredients with high-performance resin, divided into the bottom coating and surface coating a total of two layers, has the best anti-corrosion, h...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية