Categories
new blog
In recent years, with the increasing awareness of environmental protection and the importance and legislation of governments in environmental protection, more and more anti-rust paints are turning to water-based.Many foreign customers have begun to demand waterborne anti-corrosive paints for domestic suppliers. After sinograce chemical successfully launched our water-based anti-corrosive paint|wat...
Paint of water-based paint - Waterborne wood paint application process 2 Before using the soft brush, thoroughly soak it in clean water, remove excess water, and do not drip. The enamel paint should only reach half the length of the bristles.Brush as fast as possible, gently and smoothly brush the wood grain, and do not apply it back and forth repeatedly. Because the water-based paint dries quickl...
Waterborne paint testing and standards:hardness Hardness is one of the most important physical properties of a coating. Coating hardness reflects the coating's ability to resist constant dents, scratches, scribes, and penetrations caused by a hard object. Testing the hardness of materials with different methods will give different results because the testing methods are for different amounts of ma...
Water-based wood lacquer can be used to apply. The characteristics of the brush method is simple, easy to master, fast coating speed, and can eliminate the brush method commonly seen bubbles and brush marks and other shortcomings. This is because the paint left on the surface of the wood is very thin and the pressure of the brush is high, which makes the air in the wood grain and micro hole easy t...
Water based wood lacquer is mainly made of waterborne acrylic acid and polyurethane and refined by strict production process standards. It is suitable for the protection of indoor wood and wood products, and can play the role of decoration, protection and service life extension.Waterborne wood lacquer uses water as diluent, does not contain benzene and other harmful substances, non-toxic...
Laminated oil magnetic cards, Identification Card and other cards used in water-based adhesive. The card is both a document and a form or carrier of the document's existence, although it has entered the 5G era,Many things exist in electronic form, such as electronic balance cards, electronic driver's licenses, electronic health care cards, etc.But the physical card such as id card bank card is als...
Nano coating is a very advanced process in recent years. This high-tech coating is not only non-toxic and harmless, but also can effectively prevent moisture and moisture erosion. What benefits can nano coating bring to businesses. Improving Product Quality Nano coating can protect the product from PCBA layer.Assuming no such protection, once liquid such as water or sweat enters, the product may b...
Waterborne polyurethane fabric coating agent can give the fabric a good soft and plump feel and skin feeling, and the anti-wrinkle, anti-shrinkage, resilience and flexure of the coated fabric have been greatly improved, waterproof waterproof polyurethane fabric coating agent has become the fabric manufacturers and consumers favored object.So how does waterborne polyurethane work as a waterproofing...
Color material gives printing rich and colorful colors,Connecting material as the carrier of color, also as a binder to make the color fixed on the substrate surface; Fillers give the ink the appropriate properties, so that the ink to meet the printing process of printing suitability.Ink should have a certain fluidity, and meet the requirements of the nature of various printing processes, can be q...
Surface treatment of metal materials 1)metal material surface degreasing: organic solvent degreasing alkali degreasing electric degreasing ultrasonic degreasing 2)metal material surface derusting 3)Activation treatment of metal surface 4)Metal surface sandblasting treatment: increase the surface roughness Surface treatment of non-metallic materials 1)Mechanical treatment: sandpaper grinding, etc 2...
First, pour the glue on the flat glass to observe its rheology, and wiggle it to observe its rheology,If the flow of glue is too fast, it means that the glue is too thin and poor, and too thick is not conducive to bonding. Secondly, with a hand dip to observe its viscosity if you can slowly draw, a little sticky hand is better. Then, pour it on a small piece of glass to observe its film forming ti...
Product character Appearance：Milky white or dark blue gelatinous liquid Solid content : ≥41% PH: 7.0 to 8.0 Viscosity: 1200 ~ 1800 (MPA.s) Performance characteristic 1.Strippable protective coating is made of waterborne polyurethane, weather resistance 24 months, ice resistance, acid and alkali resistance. 2.Water based formula, odorless and tasteless, free of heavy metals and ...
The peeling protective coating is a liquid protective coating made of waterborne polyurethane, which can be sprayed on the surface of automobiles, furniture, electrical appliances and other objects as a protective coating.It has good formativity, can in complex shape surface to form a layer of continuous, uniform stick, strength, transparent protective coating, no need baking, room tempe...
The use of flocking glue is different from that of ordinary glue. General flocking process can be divided into three kinds: 1. Flocking box, according to the need of flocking products make it the size of the corresponding flocking box, then placed in the flocking box of villi, connected to the power supply, make the flocking box to form a strong magnetic field, when the product from the side wear ...
Feature 1.Non viscous: almost all substances are not bonded with PTFE coating. Very thin films also show good non-adhesion properties. 2.Heat resistance: PTFE coating has excellent heat and low temperature resistance characteristics. Short time can withstand high temperature to 300℃, generally between 240℃~260℃ can be used continuously, with significant thermal stability, it can work at ...
Product Overview The product is made of sol-gel process, with inorganic nano sol as binder, with inorganic high temperature resistant pigments and functional inorganic fillers, cured by heating, to produce a ceramic like inorganic coating film.The main components of the coating film are Si(silicon), O (oxygen), A1 (aluminum), Ti (titanium) and so on. The coating film has high hardness, delicate fe...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية