Categories
new blog
Classification and characteristics of water-based coatings - water-based alkyd paints The vegetable oil is reacted with an acid anhydride after alcoholysis to form an alkyd resin, and the content of the hydrophilic group can be increased to form a water-soluble or water-dispersible resin.Water-soluble water-based alkyds are quite transparent in appearance but have color,The alkyd emulsion was brow...
Sol-gel coating Classification and characteristics of waterborne coatings - sol /gel coatings Sol-Gel coatings is a new type of coating that has received special attention in recent years. The progress of inorganic nanopowders has promoted the development of sol-gel coatings.The main component of the sol-gel coating is an organic resin and a silane compound, and the silane is hydrolyzed to form a ...
Classification and characteristics of waterborne coatings - waterborne light curing coatings Waterborne light curing coating is a kind of coating classified by curing method. It is a very important kind of coating.In any polymer molecule, a structure in which a reactive group capable of being decomposed by a photoinitiator or a structure capable of being excited by a high-energy radiation to produ...
In the formulation of waterborne wood lacquer topcoats, the binder is a key component in forming the film and determining the properties of the film. The binder, ie the polymer emulsion, dispersion or hybrid, accounts for more than 80%, preferably more than 90%.Since the solid content of the emulsion, especially the aqueous dispersion is relatively low (the aqueous dispersion is generally 30% to 3...
Formulation design system for waterborne coatings - film forming AIDS The polymer constituting the emulsion or dispersion generally has a glass transition temperature higher than room temperature. In order for the emulsion particles to be well fused into a uniform paint film, it is necessary to reduce the minimum film formation temperature (MFFT) of the crystallization aid.Film form...
Formulation design system for waterborne coatings - film forming AIDS The polymer constituting the emulsion or dispersion generally has a glass transition temperature higher than room temperature. In order for the emulsion particles to be well fused into a uniform paint film, it is necessary to reduce the minimum film formation temperature (MFFT) of the crystallization aid.Film form...
Formulation design system for waterborne coatings - film forming AIDS The polymer constituting the emulsion or dispersion generally has a glass transition temperature higher than room temperature. In order for the emulsion particles to be well fused into a uniform paint film, it is necessary to reduce the minimum film formation temperature (MFFT) of the crystallization aid.Film forming agents are ...
The types and functions of surface control agents include: 1.Improve flow and leveling 2.Reduce friction coefficient and increase slip 3.Enhanced scratch resistance 4.Anti-blocking 5.Enhance the arrangement of matte powder, etc. 6.Special feel, such as softness, etc. 7.Others such as improving the water resistance and stain resistance of the coating film On the one hand, they balance the surface t...
Water - based coating formulation design system - matting agent Matting agents are additives used to control the gloss of waterborne wood coatings to meet the broad needs of mainstream matt paints in today's market.The extinction mechanism of the matting agent can be arranged in an orderly manner on the surface of the coating film, so that the surface of the coating film is uneven, causing the lig...
Waterborne paint formulation design system - pH regulator Waterborne wood coatings may also need to adjust the pH when necessary.Most emulsions or aqueous dispersions have been adjusted to a pH of 8 to 9 when they are produced, eliminating the need for pH adjusters when making paint.If the pH value is different, add 0.05% to 0.1% of the pH adjuster during the paint making process, and adjust the p...
To master waterborne wood coatings and coatings, you must be familiar with the characteristics of wood. In this way, we can find the root cause of the problem in the painting process and make the necessary preventive and treatment measures. Wood is a natural fiber material, seen from the cross section of the trunk, it is a uniform material composed of layers of different materials, with many textu...
Due to the chemical composition of the wood and the particularity of the wood fiber, if it is not handled properly, the water-based paint film will be damaged. Wood is composed of cellulose and a small amount of gum, resin (rosin), pigment, tannin and the like. Although the amount of gum, resin, pigment, tannin, etc. is small, it has a large negative impact on the properties of the coating (mainly...
Wood coating process 1.There are many large holes in the hard wood, putty or hole adding agent to flatten; 2.Apply closing primer after hole filling； 3.If you need to deepen the surface texture of the wood and highlight the wood grain, you can apply the closed primer and apply the water color； 4.After conditioning the wood grain, apply two closed primer； 5.Finish with top coat. Sinograce Chemical ...
Cohesion and thermal expansion coefficient of paint film The force caused by the cohesion of molecules of the same substance is called cohesion.The more cohesive the coating, the worse the adhesion.In the drying process of paint, with the increase of solvent volatilization and crosslinking degree, the cohesion between film forming material molecules increases, the film produces shrinkage phenomeno...
Adding certain kinds and dosages of substrate wetting agent and adhesion promoter to the transparent base formulation helps to improve the adhesion of the paint film; the type and quality of the color paste are not only related to the phase of the color paste and the transparent base. Capacity also has a certain influence on the adhesion of the paint film. The thickness of the paint film, the dryi...
Water - based acrylic emulsion formulation needs to be considered: water - based acrylic resin composition The choice of emulsion raw materials is the most important decision for engineers when formulating aqueous paint formulations.The main properties of the coating are determined by the resin.A wide variety of water-based acrylate emulsions, including polystyrene-acrylate emulsions, are on the m...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية