• 2026-07-10 13:22:24
• admin

Resin is the main film-forming component in printing ink. It influences pigment dispersion, adhesion, drying speed, gloss, flexibility and resistance. There is no universal resin for every ink. The right choice depends on the ink system, substrate, printing method and the conditions the printed product will face after printing. Quick Resin Selection Guide Ink typeCommon resin choicesMain advantage...

• printing ink resin
• resin for printing ink
• printing ink binder

• 2026-07-16 15:53:46
• admin

Waterborne polyurethane dispersions, commonly known as PUDs, may appear milky white, translucent, or slightly bluish in the liquid state. This difference is mainly related to particle size, particle size distribution, and how strongly the dispersed particles scatter visible light. In general, milky dispersions scatter more light, while finer dispersions allow more light to pass through. However, a...

• PUD
• polyurethane dispersions
• waterborne polyurethane

• 2026-07-22 18:56:18
• admin

When formulating a water-based acrylic pressure-sensitive adhesive for labels, Tg is usually one of the first parameters we set. It indicates whether the dry adhesive film will behave relatively soft or firm at a given temperature and influences initial tack, peel adhesion, holding power, low-temperature performance and adhesive ooze. However, Tg alone does not determine whether an adhesive is sui...

• pressure sensitive adhesive Tg
• removable label adhesive formulation
• label adhesive Tg