Categories
new blog
Label is used to show the relevant instructions of the product of the printed matter, some are on the back of the glue, but there are some printed matter is not with glue, glue label is known as "self-adhesive label". Self-adhesive label is a kind of material, also called self-adhesive material. It is a composite material made of paper, film or other special materials, coated with adhesive on...
Sixteen common types of self-adhesive labels This paper introduces sixteen types of self-adhesive labels commonly seen in daily life. The specific types of self-adhesive labels are as follows: 1. Press smooth writing paper and offset paper labels Multi-purpose label paper for information labels, bar code printing labels, especially suitable for high speed laser printing, also suitable fo...
Water-based single-component protective film adhesive is an environmentally friendly adhesive prepared by using natural polymer or synthetic polymer as adhesive and water as solvent or dispersant instead of toxic organic solvents that pollute the environment.Existing water-based adhesives are not 100% solvent-free and may contain limited volatile organic compounds as additives to their water-based...
The appearance of non-stick pan provides conditions for healthy cooking with less oil, and also makes cooking utensils more convenient to clean. However, in the non-stick frying pan into life at the same time, the safety of its coating has never been questioned.There are two main coating processes for non-stick frying pans: one is the traditional coating process, Teflon coating (PTFE); The second ...
Product Overview The product is made of sol-gel process, with inorganic nano sol as binder, with inorganic high temperature resistant pigments and functional inorganic fillers, cured by heating, to produce a ceramic like inorganic coating film.The main components of the coating film are Si(silicon), O (oxygen), A1 (aluminum), Ti (titanium) and so on. The coating film has high hardness, delicate fe...
Feature 1.Non viscous: almost all substances are not bonded with PTFE coating. Very thin films also show good non-adhesion properties. 2.Heat resistance: PTFE coating has excellent heat and low temperature resistance characteristics. Short time can withstand high temperature to 300℃, generally between 240℃~260℃ can be used continuously, with significant thermal stability, it can work at ...
If you've ever used a non-stick pan, you know how good it is.You don't need any cooking skills to get a spoonful of rice without the rice crust and a full fried egg for breakfast. It also cooks healthier with less oil and less paste. However, in recent years, "non-stick pans are toxic" claims abound; Also many people see the bottom of the non-stick pan is scratched, showing mottled lines, always w...
After the ink is transferred to the printing surface by the blanket at a certain printing speed and under a certain printing pressure, the fixation and drying speed of the ink film, as well as the color, gloss, fastness and resistance after film formation, etc. ensure the printing effect, which are collectively referred to as the printing quality suitability of the ink. It mainly includes color, p...
Ink in the transfer, distribution (from the ink hopper ink, after complex transfer and distribution, until the smooth transfer to the surface of the printing sheet to form a blot), the flow phenomenon is called the transfer of ink, it is the main body of ink operation adaptability. The transfer of ink can be understood from two aspects: On the one hand, ink transfer, uniform ink and ink roller tra...
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top