Categories
new blog
Waterborne Acrylic Resin Product Description: The water-based acrylic resin is made of acrylic acid and acrylate monomer through solution polymerization. Product purpose: This product can be used for water-based aluminum foil gloss and ink, water-based gravure printing paper gloss and ink, water-based carton ink manufacturing Product features:alcohol water as the main solvent, has no smell, no tox...
Waterborne polyurethane is often used in the preparation of waterborne coatings because of its excellent film formation and adhesion, excellent flexibility and wear resistance.However, water-based polyurethane dispersion contains a lot of surfactant, easy to produce bubbles, and because of the special properties of water-based polyurethane, it is necessary to use the characteristics of water-based...
The bonding effect can be achieved by applying pressure for a short time (non-aqueous solvent heating) It overcomes the solvent volatilization and drying time needed during the operation of structural adhesive, and can improve the working environment After stripping, it can be corrected without contamination and can be reused for many times Easy to operate, can greatly improve the production effic...
First, pour the glue on the flat glass to observe its rheology, and wiggle it to observe its rheology,If the flow of glue is too fast, it means that the glue is too thin and poor, and too thick is not conducive to bonding. Secondly, with a hand dip to observe its viscosity if you can slowly draw, a little sticky hand is better. Then, pour it on a small piece of glass to observe its film forming ti...
Surface treatment of metal materials 1)metal material surface degreasing: organic solvent degreasing alkali degreasing electric degreasing ultrasonic degreasing 2)metal material surface derusting 3)Activation treatment of metal surface 4)Metal surface sandblasting treatment: increase the surface roughness Surface treatment of non-metallic materials 1)Mechanical treatment: sandpaper grinding, etc 2...
Non-stick pot is cooking will not stick to the bottom of the pot, because the bottom of the pot uses a non-stick coating, the common non-stick can best have teflon coating and ceramic coating. The non-stick pan overcomes all the shortcomings of the traditional pot, easy to clean, a light wipe is clean, non-stick pan can easily fry food without sticking to the bottom, can minimize the oil, the kitc...
(1)The labels on the market (especially film labels) mostly use screen printing and flexographic printing, which not only has a complex processing process, a long cycle, but also has poor timeliness. (2)In terms of product design, the selection of design scheme needs to be modified repeatedly, which is not only troublesome, but also costly (3)The traditional printing method to achieve variable dat...
As we all know, with the development of society, people attach importance to food safety and so on, label printing is greatly encouraged, and label has become comparable to packaging. The development of label has driven the development of label printing, and ink is the main medicine in label printing,In the field of label printing, ink can be generally divided into three categories, namely: water-...
Composition of pressure sensitive tape 1.Pressure sensitive adhesive, 2.substrate 3.Primer 4.Back treatment agent 5.Isolation paper The main components of the pressure sensitive adhesive and resin, including rubber such as polyacrylic acid ester or polyvinyl ether, homogeneous base material requirements, small scale and good to solvent invasive, including, (1) fabric such as cotton, glass cloth or...
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top