• 2020-11-09 11:13:20
• admin

       Plasticizer is widely used in industrial production of polymer materials auxiliaries, also known as plasticizers. All substances added to polymer materials that increase polymer plasticity are called plasticizers. The use of plasticizer can improve the properties of polymer materials, reduce production costs and improve production efficiency. is a class of important chem...

• plasticizer
• plastic plasticizer
• Waterborne plasticizer

• 2020-11-02 11:10:18
• admin

  Anhui Sinograce Chemical Co., Ltd   Polyurethane condoms, known as condoms, are made of polyurethane condoms, similar to latex condoms. Polyurethane was applied to condom production in Japan, until the emergence of China's Nakagawa 001, which broke Japan's monopoly on the production field.   Because the common latex condoms on the market are thicker and polyurethane has good ...

• polyurethane emulsion | waterborne polyurethane | dispersion | polyurethane resin |

• 2020-04-08 16:03:24
• admin

1.Introduction to silicone acrylic emulsion Silicon-acrylic emulsion is a kind of composite emulsion. It is a copolymer emulsion of organosilicone and acrylate.Acrylic resin has many excellent characteristics, such as weather resistance and light resistance, long time under ultraviolet irradiation is not easy to yellow。In addition, it also has flexibility, so it is often used as a leather finishin...

• water based polyurethane
• Silicon acrylic emulsion
• water based polyurethane emulsion

• 2020-03-24 18:56:08
• admin

In February 2020, during the severe situation of covid-19, Sinograce Chemical company dared to assume social responsibilities and made a modest contribution to the fight against covid-19. It donated alcohol and 84 disinfectant and other epidemic prevention materials to hefei primary and secondary schools and universities for daily disinfection of schools, with a total of 10 tons of 84 di...

• Sinograce Chemical
• COVID - 19
• epidemic prevention materials

• 2020-02-19 17:47:16
• admin

At present, two-component waterborne polyurethane has been widely used in leather, textile dyeing AIDS, adhesives, foam materials, coatings and other fields. With the continuous development of two-component waterborne polyurethane scientific research, it is gradually replacing solvent polyurethane as the medium to occupy the dominant position in the market. One: leather China's leather resources, ...

• waterborne polyurethane
• polyurethane coating
• water based polyurethane

• 2020-02-20 13:53:44
• admin

In polyurethane waterproof coating construction often encounter some problems, so in the process of waterproof construction encountered different problems how to solve it?sinograce waterproof with you to learn the following, polyurethane waterproof coating construction common problems and solutions. 1. viscosity (1) coating itself viscosity is very large, construction effort. (2) if the client app...

• polyurethane coating
• js waterproof coating
• polyurethane waterproof coating

• 2020-02-20 15:03:33
• admin

The choice of solvent In the printing ink manufacturing process, in consideration of the overall solvent system of the ink volatility, to improve the printing ink solvent release and reduce the solvent organic solvent residue, the use of solvents are often several volatile mixed solvents.In the printing ink manufacturing process, the main organic solvents are toluene, butanone, cyclohexanone, ethy...

• printing ink
• adhesion promoter
• Polyurethane resin

• 2020-02-20 15:36:46
• admin

One, extinction principle General can be divided into physical extinction and chemical extinction.Physical matting, is the addition of matting agent, so that the coating in the film when the uneven surface, reduce reflection and achieve low gloss. Two, the kind of matting agent Coating common matting agent can be divided into organic matting agent and inorganic matting agent two categories. 1.Orga...

• matting agent
• water-based resin
• Wax Emulsion

• 2020-02-20 15:58:38
• admin

1.The cause of a back adhesion： (1)the paste itself anti-viscosity, especially in the wet weather easy to stick back; (2)After the printing is completed, it is packaged without perfect heat treatment; (3)adjust the slurry formula is not appropriate, adding too much transparent slurry easy to cause back adhesion; (4)transport or storage conditions are not good, in high temperature, high humidity co...

• printing coating
• Styrene Acrylate Copolymer Emulsion
• Nylon Printing Ink