Search
  • High performance wetting agent
    High performance wetting agent WET-245
    WET-245 is a high wetting agent modified by polyether siloxane copolymer. It has excellent substrate wetting, anti-crater effect and flow promotion performances. It is widely used in all kinds of water based and solvent based system.
    read more
  • passivant
    Non chromium rust inhibitor MC-P5000
    Non chromium and it is environmentally friendly product Can increase the adhesion for coating and excellent anti-corrosion performance After coating, the metal surface was formed into a layer of amorphous composite oxide coating
    read more
  • steel sheet corrosion inhibitor
    Non chromium steel sheet corrosion inhibitor MC-P5101
    Feature Improve the machining performance (molding and tensile property) Non chromium corrosion inhibitor and it is environmentally friendly product Can increase the adhesion for coating and excellent anti-corrosion performance Forming a colorless film on the surface of SUPER GALUM and galvanized sheet Typical properties Appearance: White emulsion Composition: Silicon colloid and Acrylic resin Recommended dosage: 5-10% Solid content: ~10% Solvent: ~10% pH: 3.5-5.5 Brix value (50% v/v) 5-7 Technical process ①Chemical degreasing---②Electrolytic degreasing---③Water wash---④Water wash---⑤Air dry---⑥MC-P5101 roll coating ---⑦dry Recommended dosage: 100% Temperature: Below 40℃ Drying temperature: 80-100℃ Processing way: Roller coating Recommended dry film weight: 0.6~1.0 g/m2 (X-ray fluorescence spectrometer detection) The using dosage is depends on the storage time, material and other environmental indexes. Our technical engineer will recommend the optimal using dosage according to the customers’ request. Normally the using dosage is larger while used in high humidity region or need the long storage time. You need supplement the MC-P5101 with the using process due to its consumption. Especially, after roller coating, it needs to be dried under 80-100℃ to ensure the water evaporate completely. Application -SUPER GALUM and galvanized sheet surface etc. Storage and handling Available in 200 kg/ barrel or 25 kg/ barrel Storage period: 6-12 months in closed containers, shady and dry place
    read more
  • Metal rust inhibitor
    Metal rust inhibitor MC-P5200
    Feature The passivating film is colorless No chromium and heavy metal ions Pollution-free and it is environmentally friendly product Can increase the coating adhesion and anti-corrosion performance Application process Recommended dosage: 0.3~0.5% Temperature: Room temperature or medium temperature Processing time: 1-2 min Processing way: Dipping or spray pH: 8.0-10.0 The using dosage is depends on the storage time, material and other environmental indexes. Our technical engineer will recommend the optimal using dosage according to the customers’ request.  Technical process  ① Degreasing---②Water wash---③Rust remove---④Water wash---⑤Phosphate ---⑥Water wash ---⑦Rust inhibitor---⑧Post treatment Remark: Degreasing and rust removing process can be substituted for sand blasting Application -Cast iron parts, cold-rolled sheet and galvanized steel profiles surface treatment etc. Storage and handling Available in 200 kg/ barrel or 25 kg/ barrel Storage period: 12-24 months in closed containers, shady and dry place
    read more
  • Copper sheet neutral corrosion inhibitor
    Copper sheet neutral corrosion inhibitor MC-P5340
    No effect on the glossy of copper Non chromium neutral corrosion inhibitor Can increase the copper material anti-corrosion performance
    read more
  • Modified non-phosphate degreaser
    Modified non-phosphate degreaser for sheet and alloy MC-FM7230
    Non-phosphate and no heavy metal ion Two-component liquid degreaser and alkali degreaser used with surfactant Can effectively remove cold rolled steel, cast iron and precision parts surface grease, rust, dust and dirt.  
    read more

Copyright © 2015-2020 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com

top