DF-7133 is a kind of silicone defoam emulsion. It is specially developed for oil field and gas plant. It helps preserve foam control under the severe conditions of a dehydrating unit.

Silicone antifoam for waste water treatment DF-100 is a kind of high efficient antifoam/defoamer on all kinds of water treatment field. It can be applied to various kinds of biological sewage treatment industries, industrial sewage treatment, chemical sewage treatment, etc.

CA-95 is an aqueous solution of a sodium salt of an amino functional sulfonic acid. It contains a primary and a secondary amino group and combines the properties of an emulsifier and a chain extender in the production of aqueous PUR/water based polyurethane (WPU) dispersions.

Type Phenyltrimethoxysilane Typical properties Appearance:             Colorless transparent liquid Concent:                   98% CAS:                         2996-92-1 Boiling point:             211℃ Molecular Weight:      198 Density:                    1.067 ± 0.005 g/cm 3 Refractive index:        1.470 ± 0.005 Structural formula:     C6H5Si(OCH3)3 Application -Electronic materials handling -Phenyl silicone oil feedstock -Silicone resin crosslinking agent -Preparation of organic polymer materials Storage and handling Available in 25 kg/drum Store products in tightly closed original containers at 5-40℃ Shelf life: 12 months from delivery date According to non-dangerous goods transport

Enhance adhesion between the metal Improve water resistance, weather resistance

The rust inhibitor applied to dipping, spray and roller coating Contain hexavalent chromium and can increase anti corrosion of Galvanized sheet and alloy galvanized sheet

No effect on the glossy of copper Non chromium neutral corrosion inhibitor Can increase the copper material anti-corrosion performance

Can effectively remove non-ferrous metal surface grease, rust, dust and dirt. No acid mist, no pollution, low foaming and acid liquid products One-time processing complete to degrease and derust Non corrosion effect on the metal surface

Water based polyurethane electrostatic flocking adhesive is designed for rubber, PVC, PU, shoes materials etc. It is VOC free and formaldehyde free

Water based composite adhesive is non-toxic, VOC free and formaldehyde free, it is designed for PVC, PP, sponge, paper, cloth, can be also used for high grade composite fabric, car interior decoration, bags, paper bags, etc.

Water based card adhesive is VOC free and formaldehyde free, it is designed for PVC firm for card industry

The peelable coating is designed using water based polyurethane that can be applied to smooth, non-porous surfaces and simply peeled off once dry. All peelable coatings may be applied with water compatible airless sprayers or automatic spray systems to protect surfaces from minor nicks, scratches, abrasions, and any other unwanted contaminants during transit or in completion or assembly during manufacturing.

SA-902 is a waterbased  polyurethane sealant that penetrates into the slate road and has a hydrophobic function, good abrasion resistance, water resistance, and can inhibit the growth of seaweed and mold.

Silicone Type Antifoam Agent Type HS code Appearance Active Ingredient Suggested Add Amount Ingredient Solvent Applications and Characteristics waterbase system solventbase system UV system SG-430 3402900090 water-write transparent solution 7% 0.1-1% Mixture of  antifoam copolymer and organosilicone aliphatic hydrocarbon 1.Excellent compatibility and fast speed of defoam ability. 2.can be used in any stage of coating producing and operating. 3.Suitable for UV and epoxy system.   √   SG-441   water-write transparent solution <3% 0.1-1% Modified polysiloxane solution Mixed aromatics 1.Excellent compatibility and fast speed of defoam ability. 2.can be used in any stage of coating producing and operating.   √   SG-472   water-write transparent solution 70% 0.1-1% Modified polysiloxane solution Mixed aromatics 1.Good compatibility and strong defoam ability. 2.Excellent foam-broken and anti foam develop ability. 3.Suitable for any stage of the coating produce and all types of the operate way like brush, roller and spray coat.   √ √ SG-467   water-write transparent solution 1% 0.1-1% Modified polysiloxane solution Isooctyl acetate 1.Good compatibility and strong defoam ability. 2.Excellent foam-broken and anti foam develop ability. 3.Suitable for any stage of the coating produce and all types of the operate way like brush, roller and spray coat.   √ √ SG-475   lemon-yellow viscous fluid 100% 0.05-1% Modified polysiloxane  … 1.Strong defoam ability and suitable for solventbase and UV system. 2.especially sutiable for defoaming and foaming off of high viscosity system.   √ √ SG-486N   feculent viscous fluid 100% 0.05-1% White carbon black modified polysiloxane … 1.High efficiency of defoaming, foam off and anti-foam development,epscially it has good effect to broke little foam. 2.Especially suitable for silk screen ink and epoxy system.   √ √ SG-419W   water-write transparent solution 60% 0.05-1% Modified polysiloxane solution dipropylene glycol monomethyl ether 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √     SG-424W   lemon-yellow viscous fluid 100% 0.05-1% Modified polysiloxane  … 1.High speed of defoaming. 2.Easy to disperse. 3.Strong defoam ability. √     SG-465W   white emulsion 50% 0.05-1% Modified organosilicone emulsion water 1.High speed of defoaming. 2.Easy to disperse. 3.Strong defoam ability. √     SG-471W   lemon-yellow viscous fluid 100% 0.05-1% Modified polysiloxane  … 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √ √ √ SG-481W   lemon-yellow feculent  viscous fluid 100% 0.05-1% Mixture of modified polysiloxane and antifoam materials … 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √ √ √ SG-485W   white emulsion 25% 0.05-1% Modified organosilicone emulsion water 1.High speed of defoaming. 2.Easy to disperse. 3.Strong defoam ability. √     SG-491W   lemon-yellow viscous fluid 100% 0.05-1% Mixture of modified polysiloxane and antifoam materials … 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √ √ √

Non-silicification Type Antifoam Agent Type HS code Appearance Active Ingredient Suggested Add Amount Ingredient Solvent Applications and Characteristics waterbase system solventbase system UV system SG-506W 34029000.9 lemon-yellow viscous fluid 100% 0.3-1% Mineral oil compound … 1.High efficiency of defoaming. 2.used in emulsion latex system. √     SG-520   lemon-yellow viscous fluid 100% 0.3-1% Non-silicification copolymer … 1.Excellent compatibility and deadly lower trend of shrinkage.2.High speed of defoaming. 3.Suitable for UV system and other high crosslinking system.   √ √ SG-530   lemon-yellow viscous fluid 100% 0.1-1% Acrylic ester copolymer … 1.High defoam ability. 2.Has great effect to thick-coat , high viscosity system, zinc stearate primer.3.Suitable for PU,UPE and epoxy system etc.   √ √ SG-552   lemon-yellow transparent solution 30% 0.1-1% Acrylic ester copolymer Mixed aromatics 1.Higher defoam efficiency and cost performance.       2.Especially suitable for thick-coat , high viscosity system and  zinc stearate primer.3.Lower trend of shrinkage   √   SG-555   lemon-yellow transparent solution 7% 0.1-1% Non-silicification copolymer solution Mixed aromatics 1.Excellent compatibility and deadly lower trend of shrinkage. 2.Lower effect to the transparency of the coat film. 3.Suitable for medium and high polar system like UV.     √ SG-557   lemon-yellow transparent solution 40% 0.1-1% Non-silicification copolymer solution Mixed aromatics 1.Excellent compatibility and deadly lower trend of shrinkage. 2.Lower effect to the transparency of the coat film. 3.Suitable for medium and high polar system like UV, epoxy and PE system.   √ √ SG-590   Water white and lemon-yellow viscous fluid 100% 0.1-1% vinyl ether compound … 1.High defoam ability. 2.Suitable for all types of solventbase system and UV system especially for coil material coat. 3.Excellent foam burst effect.   √ √

The Wetting agent for Base Materials Type HS code Appearance Active Ingredient Suggested Add Amount Solvent Ingredient Static surface tension Dynamic surface tension Applications and Characteristics waterbase system solventbase system UV system SG-304 3402900090 Water white solution 50% 0.1-1% dipropylene glycol monomethyl ether The mixture of non-siliceous surface active agent 33 38 1.Can reduce dynamic surface tension largely. 2.Excellent defoam ability, wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-342   lemon-yellow viscous fluid 100% 0.1-1% … The mixture of non-siliceous surface active agent 33 38 1.Can reduce dynamic surface tension largely. 2.Excellent defoam ability, wetting ability and anti-shrinkage property. 3.Good levelling property. √ √ √ SG-343   lemon-yellow viscous fluid 100% 0.1-1% … Modified organofluorine compound 18 45 1.Suitable for waterbase,solventbase and UV system. 2.High cloud point. 3.Excellent wetting ability and anti-shrinkage property. 4.Good water solubility and levelling property. √ √ √ SG-344   lemon-yellow viscous fluid 100% 0.1-1% … The mixture of non-siliceous surface active agent 33 38 1.Can reduce dynamic surface tension largely. 2.Excellent wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-345   lemon-yellow viscous fluid 100% 0.1-1% … polyether modified silicone oil 22 48 1.Suitable for waterbase,solventbase and UV system.2.High cloud point. 3.Excellent wetting ability and anti-shrinkage property. 4.Good water solubility and levelling property. 5.Using under PH 6-8 √ √ √ SG-346   lemon-yellow transparent solution 50% 0.1-1% dipropylene glycol monomethyl ether polyether modified silicone oil solution 23 48 1.Suitable for waterbase,solventbase and UV system. 2.Can reduce surface tension largely. 3.Excellent wetting ability and anti-shrinkage property. 4.Can be used in more PH range. √ √ √ SG-347   lemon-yellow viscous fluid 100% 0.1-1% … non-ionic surface active agent compound 33 38 1.Excellent dynamic surface activity and strong hydrophilic property .2.Excellent wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-348   lemon-yellow transparent fluid 100% 0.1-1% … polyether modified silicone oil 23 48 1.Suitable for waterbase,solventbase and UV system 2.Excellent fast-levelling effect. 3.Can reduce surface tension largely. 4.Excellent wetting ability and anti-shrinkage property. 5.Good levelling property and hydrolysis resistance. 6.Can be used in more PH range. √ √ √ SG-349   lemon-yellow transparent fluid 100% 0.1-1% … polyether modified silicone oil 23 48 1.Suitable for waterbase,solventbase and UV system. 2.Excellent fast-levelling effect. 3.Can reduce surface tension largely. 4.Excellent wetting ability and anti-shrinkage property. 5.Good levelling property and hydrolysis resistanc. 6.Can be used in more PH range. √ √ √ SG-360   lemon-yellow viscous fluid 100% 0.1-1% … polyether modified silicone oil 22 52 1.Suitable for waterbase,solventbase and UV system. 2.Excellent fast-levelling effect. 3.Can reduce surface tension largely. 4.Excellent wetting ability and anti-shrinkage property. 5.Good levelling property √ √ √ SG-364   lemon-yellow viscous fluid 100% 0.1-1% … non-ionic surface active agent compound 26 30 1.Excellent dynamic surface activity and strong hydrophilic property. 2.Excellent wetting ability and anti-shrinkage property.  3.Good levelling property. √     SG-375   lemon-yellow viscous fluid 100% 0.1-1% water non-ionic surface active agent compound 32 51 1.Excellent dynamic surface activity 2.Excellent wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-378   lemon-yellow Transparent fluid 100% 0.1-1% … polyether modified silicone oil 21.5 48 1.Suitable for waterbase,solventbase and UV system. 2.Can reduce surface tension largely. 3.Excellent wetting ability and anti-shrinkage property. 4.Good levelling property and can be used under PH 6-8. √ √ √ SG-379   lemon-yellow viscous fluid 100% 0.1-1% … polyether modified silicone oil 21.5 48 1.Suitable for waterbase,solventbase and UV system. 2.Can reduce surface tension largely. 3.Excellent wetting ability and anti-shrinkage property. 4.Good levelling property and can be used under PH 6-8. √ √ √