As temperature resistance decorative non-stick coating, it could be used on outside of aluminum non-stick cookware. Please do complete applicability test for specific use

SA-2900 Water based cold laminating adhesive is eco-friendly, benzene free, very low VOC. It is specially used for BOPP film to paper bonding.

The Organosilicon Type Leveling Agent  Type HS code Appearance Active Ingredient Suggested Add Amount Ingredient Silica content Applications and Characteristics waterbase system solventbase system UV system SG-306 3402900090 water-write transparency 15% 0.1-1% polyether modified silicone oil solution medium Good compatibility and hand-feeling property great surface tension reducing property. It has excellent wet ability to the substrate layer and can improve smooth and anti-scrub of the film. Good capacity of orientation to the matting agent and can be used in baking varnish system under 150℃.   √   SG-3310   water-write transparency 25% 0.05-1% polyester modified silicone oil solution medium Excellent high thermal resist and can be fit for bake temp uder 300℃, suit for bake varnish system,good compatibility,levelling ability and hand feeling, strong shrinkage resist, suit for industry bake varnish   √ √ SG-314N   lemon-yellow viscous fluid  100% 0.1-1% polyether modified silicone oil low 1.Epoxy,UPE, UV etc system. 2.Excellent levelling property and good defoam ability. 3.Be well suitable for epoxy floor coat system.   √ √ SG-319   lemon-yellow lemon-green water-write transparency viscous fluid 100% 0.1-1% polyether modified silicone oil low 1.good compatibility and levelling propety. 2.be suitable for kinds of system under normal temp. 3.can be used bake varnish system under 150℃. √ √ √ SG-320   lemon-yellow viscous fluid 50% 0.1-1% polyether modified silicone oil low 1.excellent levelling property. 2.good defoam ability. 3.suitable for medium and low polar system.   √ √ SG-323   lemon-yellow viscous fluid 100% 0.1-1% aralkyl modified silicone oil  high 1.excellent levelling ability with good defoam ability. 2.Can increase the smooth ability and anti scrub ability. 3.Can increase the capacity of orientation of the matting agent and metal pigment. 4.Strong  high thermal resist and can be fit for bake temp uder 300℃.  5.Be suitable for all types of solventbase system.   √ √ SG-325   lemon-yellow viscous fluid 100% 0.1-1% modified polysiloxane medium 1.Suitable for all types of solventbase system especially for artificial leather system. 2.good levelling ability.   √ √ SG-326   lemon-yellow viscous fluid 100% 0.1-1% polyether modified silicone oil low 1.Excellent compatibility and levelling propety 2.Can get mirror face effect nearly. 3.Be suitable for both solventbase ans waterbase system. √ √ √ SG-331   lemon-yellow viscous fluid 100% 0.1-1% polyether modified silicone oil Medium 1.good compatibility with great levelling ability. 2.Specially suitable for industry paint system without effecting recoat ability. 3.Can be also used in bake varnish under 150 C. √ √ √ SG-332   lemon-yellow viscous fluid 100% 0.1-1% polyether modified silicone oil Medium 1.Excellent wetability to the substrate. 2.good leveling ability and great hand feeling. 3.Strong shrinkage resist ability with no effect recoat. 4.Specially suitable for UV ink and coat system, also can be used in bake varnish under 150 C. √ √ √ SG-333   lemon-yellow viscous fluid 100% 0.1-1% polyether modified silicone oil Medium 1.Can be used in solventbase and waterbase system. 2.Strong combination property with high compability, levelling ability, hand feeling property and the capacity of orientation of the matting agent. 3.Strong shrinkage resist ability withour effecting recoat. 4.Also can be used in bake varnish system under 150C.  √ √ √ SG-333A   lemon-yellow viscous fluid 100% 0.1-1% polyether modified silicone oil Medium 1.Can be used in solventbase and waterbase system. 2.Strong combination property with high compability, levelling ability, hand feeling property. 3.Strong shrinkage resist ability withour effecting recoat. 4.Also can be used in bake varnish system under 150C.  √ √ √ SG-334   lemon-yellow viscous fluid 100% 0.1-1% polyether modified silicone oil Medium sharp high 1.Best hand-feeling product used in high gloss system. 2.Strong combination property with high compability, levelling ability, hand feeling property . 3.Strong shrinkage resist ability withour effecting recoat. 4.Also can be used in bake varnish system under 150C.  √ √ √ SG-335   water-write transparency 100% 0.1-1% modified polysiloxane High 1.Very strong shrinkage resist ability. 2.Good levelling ability with defoam capacity.   √ √ SG-3351   lemon-yellow viscous fluid 100% 0.1-1% polyether modified silicone oil Medium sharp high 1.Specially for UV system and also can be used in epoxy,UPE and waterbase system, suitable very well for UV paper coating. 2.Srong wearing resistance and hand-feeling sticky resist property. 3.Strong tape-tearing resist ability.  √ √ √ SG-351N   semi-transparent paste 80% 0.1-1% high molecular weight siloxane dispersion High 1.high molecular weight siloxane dispersion. 2.can increase the wearin...

Non-silicification Type Leveling Agent  Type HS code Appearance Active Ingredient Suggested Add Amount Ingredient Solvent Applications and Characteristics waterbase system solventbase system UV system SG-236 3402900090 water-write transparency solution 50% 0.1-1% fluorine-containing acrylic ester copolymer solution Mixed aromatics 1.Excellent fast levelling property. 2.Great wet property to the sibstrate and  strong shrinkage ability. 3.Suit for high required system with levelling property. 4.specially for automobile repair paints,high grade wooden paint and UV system etc.   √ √ SG-237   water-write transparency solution 70% 0.1-1% fluorine-containing acrylic ester copolymer solution Mixed aromatics 1.Excellent fast levelling property. 2.Great wet property to the sibstrate and  strong shrinkage ability without effecting adhensive force among layers. 3.Strong defoam ability.         √ √ SG-238W   water-write transparency solution 100% 0.1-1% Modified acrylic ester copolymer … 1.Excellent compatibility and wet ability to the substrate. 2.Good levelling property. 3.suitable for waterbse and solventbase system. √ √ √ SG-254N   water-write transparency solution 50% 0.1-1% Acrylic ester copolymer solution Mixed aromatics 1.Suitable for solventbase system especially for coil material system and epoxy system. 2.Great levelling property with good defoam ability,   √   SG-258   water-write transparent solution 50% 0.1-1% Acrylic ester copolymer solution Mixed aromatics 1.Excellent compatibility,levelling property and wet property to the substrate. 2.Make sure the film clear without shadow in high gloss coat system. 3.Used in automobile repair paint and UV etc system.   √ √ SG-280W   water-write transparent solution 50% 0.1-1% Modified acrylic ester copolymer dipropylene glycol monomethyl ether 1.Excellent compatibility,levelling property and wet property to the substrate. 2.Suitable for solventbase and waterbase system. √ √ √ SG-2061   water-write transparent viscous fluid 100% 0.1-1% Acrylic ester copolymer  … 1.Excellent compatibility,levelling property and wet property to the substrate. 2.Make sure the film clear without shadow in high gloss coat system. 3.Used in automobile repair paint and UV etc system.   √ √

Silicone Type Antifoam Agent Type HS code Appearance Active Ingredient Suggested Add Amount Ingredient Solvent Applications and Characteristics waterbase system solventbase system UV system SG-430 3402900090 water-write transparent solution 7% 0.1-1% Mixture of  antifoam copolymer and organosilicone aliphatic hydrocarbon 1.Excellent compatibility and fast speed of defoam ability. 2.can be used in any stage of coating producing and operating. 3.Suitable for UV and epoxy system.   √   SG-441   water-write transparent solution <3% 0.1-1% Modified polysiloxane solution Mixed aromatics 1.Excellent compatibility and fast speed of defoam ability. 2.can be used in any stage of coating producing and operating.   √   SG-472   water-write transparent solution 70% 0.1-1% Modified polysiloxane solution Mixed aromatics 1.Good compatibility and strong defoam ability. 2.Excellent foam-broken and anti foam develop ability. 3.Suitable for any stage of the coating produce and all types of the operate way like brush, roller and spray coat.   √ √ SG-467   water-write transparent solution 1% 0.1-1% Modified polysiloxane solution Isooctyl acetate 1.Good compatibility and strong defoam ability. 2.Excellent foam-broken and anti foam develop ability. 3.Suitable for any stage of the coating produce and all types of the operate way like brush, roller and spray coat.   √ √ SG-475   lemon-yellow viscous fluid 100% 0.05-1% Modified polysiloxane  … 1.Strong defoam ability and suitable for solventbase and UV system. 2.especially sutiable for defoaming and foaming off of high viscosity system.   √ √ SG-486N   feculent viscous fluid 100% 0.05-1% White carbon black modified polysiloxane … 1.High efficiency of defoaming, foam off and anti-foam development,epscially it has good effect to broke little foam. 2.Especially suitable for silk screen ink and epoxy system.   √ √ SG-419W   water-write transparent solution 60% 0.05-1% Modified polysiloxane solution dipropylene glycol monomethyl ether 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √     SG-424W   lemon-yellow viscous fluid 100% 0.05-1% Modified polysiloxane  … 1.High speed of defoaming. 2.Easy to disperse. 3.Strong defoam ability. √     SG-465W   white emulsion 50% 0.05-1% Modified organosilicone emulsion water 1.High speed of defoaming. 2.Easy to disperse. 3.Strong defoam ability. √     SG-471W   lemon-yellow viscous fluid 100% 0.05-1% Modified polysiloxane  … 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √ √ √ SG-481W   lemon-yellow feculent  viscous fluid 100% 0.05-1% Mixture of modified polysiloxane and antifoam materials … 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √ √ √ SG-485W   white emulsion 25% 0.05-1% Modified organosilicone emulsion water 1.High speed of defoaming. 2.Easy to disperse. 3.Strong defoam ability. √     SG-491W   lemon-yellow viscous fluid 100% 0.05-1% Mixture of modified polysiloxane and antifoam materials … 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √ √ √

Non-silicification Type Antifoam Agent Type HS code Appearance Active Ingredient Suggested Add Amount Ingredient Solvent Applications and Characteristics waterbase system solventbase system UV system SG-506W 34029000.9 lemon-yellow viscous fluid 100% 0.3-1% Mineral oil compound … 1.High efficiency of defoaming. 2.used in emulsion latex system. √     SG-520   lemon-yellow viscous fluid 100% 0.3-1% Non-silicification copolymer … 1.Excellent compatibility and deadly lower trend of shrinkage.2.High speed of defoaming. 3.Suitable for UV system and other high crosslinking system.   √ √ SG-530   lemon-yellow viscous fluid 100% 0.1-1% Acrylic ester copolymer … 1.High defoam ability. 2.Has great effect to thick-coat , high viscosity system, zinc stearate primer.3.Suitable for PU,UPE and epoxy system etc.   √ √ SG-552   lemon-yellow transparent solution 30% 0.1-1% Acrylic ester copolymer Mixed aromatics 1.Higher defoam efficiency and cost performance.       2.Especially suitable for thick-coat , high viscosity system and  zinc stearate primer.3.Lower trend of shrinkage   √   SG-555   lemon-yellow transparent solution 7% 0.1-1% Non-silicification copolymer solution Mixed aromatics 1.Excellent compatibility and deadly lower trend of shrinkage. 2.Lower effect to the transparency of the coat film. 3.Suitable for medium and high polar system like UV.     √ SG-557   lemon-yellow transparent solution 40% 0.1-1% Non-silicification copolymer solution Mixed aromatics 1.Excellent compatibility and deadly lower trend of shrinkage. 2.Lower effect to the transparency of the coat film. 3.Suitable for medium and high polar system like UV, epoxy and PE system.   √ √ SG-590   Water white and lemon-yellow viscous fluid 100% 0.1-1% vinyl ether compound … 1.High defoam ability. 2.Suitable for all types of solventbase system and UV system especially for coil material coat. 3.Excellent foam burst effect.   √ √

SA-240 is an water based glue/adhesive designed for the production of adhesive products and other pressure sensitive materials, such as cleanroom sticky mats, self-adhesive labels, etc.

Label performance and durability depend on selecting the right adhesive for your application. Product shape, texture, substrate composition, temperature and moisture exposure, and removability are a few of the factors that determine which type of adhesive is for your particular application. Industrial glue water based acrylic pressure sensitive adhesive for sticker tag/barcode .

SA-248G is a top coating specially designed for corona treated nonpolar films (PE, PP, OPP, BOPP etc.). It can improve film and UV ink printing.

SA-248M is a top coating specially designed for corona treated nonpolar films (PE, PP, OPP, BOPP etc.). It can improve film and UV ink printing, good feeling.

Pressure sensitive adhesive is ester monomer production based on the development and production of a kind of self-crosslinking pure acrylic emulsion powered by our company. It have good adhesion force on metal, glass, cardboard, etc. Apply various types of coating machine and drying quickly, suitable for high speed coating and has good compatibility with paint. Duct tape can be used to produce BOPP film tape, paper, etc.

SA-234PVC Film Label Adhesives is an aqueous dispersion polymer with unique balance of cohesion, tack and peel adhesion properties for PVC film labels. This product is recommended for applications where mandrel resistance is required.

High peel strength water based acrylic adhesive for trademark/label Applied for trademark film and trademark label And it is also suitable for trademark flim and PE film. It has exellent performence on the Trademark flim and label

DAIKIN R-1420;1H,1H,2H,2H-Nonafluorohexyl acrylate;2-(Perfluorobutyl)ethyl acrylate;2-Propenoic acid 3,3,4,4,5,5,6,6,6-nonafluorohexyl ester;3,3,4,4,5,5,6,6,6-Nonafluorohexyl acrylate;3,3,4,4,5,5,6,6,6-Nonafluorohexylacrylate;Acrylic acid 2-(nonafluorobutyl)ethyl ester;Acrylic acid 3,3,4,4,5,5,6,6,6-nonafluorohexyl ester

9H-Fluoren-9-one; Fluorenone

Cloth Adult N95 Half Respirator Breathing Disposable Dust Face Mask For PM2.5 Product Description 1 Product Name Face mask Size 17.5*9.5cm Material Non woven Style earloop or tie on Nose bar: Single aluminum strip or double alminium strip Customized Color Disposable Face Mask Product Specification Customized Color Disposable Face Mask 1.Material:Non woven 2. Ply:3 ply 3.Style:earloop or tie on 4.Application:Eco-Friendly, Water Soluble, Other 5.Size:Clinical ,hospital, housework, gardening and maintenance for filtering dust,pollen, and bacteria 6.Color:White ,blue,pink,green ,black 8.Packing:50pcs/box,2000pcs/carton Product Specification 2 Safety Flat Folding Mask Product Specification 1, Material: Non woven PP 2, Size: 17.5×9.3cm, 17.5×9.5cm, as customers’ requirement 3, Color: White, green, blue, pink, grey and so on. Other colors are also available. 4, Style: Elastic earloop or with ties on. 5, Layer: Usually 3ply, 2ply and 4ply are also available for different requirement 6, Nose bar: Single aluminum strip or double alminium strip 7, Economic, light, Non-irritating, Comfortable 8. Prevent contamination from bacteria, dust, or coughing Safety Flat Folding Mask CATEGORY AND TAGS: Folding Mask 3D folding mask, Anti-dust Mask, Flat Mask, Fold Mask, Safety Flat Folding Mask Usage and Industry Anti-odor, Anti-flu; Anti-infection, Food Processing ,Medical Treatment Precise Chemical Industry