Search
  • superhydrophobic coating for fabric
  • defoaming agent
    Silicone defoaming agent DF-024
    DF-024 is silicone-containing defoamer. It is comparable with BYK 024. It has excellent defoaming performance and good compatibility with pigment and other emulsion.
    read more
  • antifoam agent
    Silicone antifoam agent DF-65
    DF-65 is a silicone antifoam agent used to provide defoaming and improve leveling, wetting and slip properties. It is applicable for ink and coating system.
    read more
  • High concentrated silicone defoamer
    High concentrated silicone defoamer DF-900
    DF-900 is a high concentrated silicone defoamer excellent defoamer and deaerator for solvent-based formulations. It is a liquid and has outstanding performance particular in higher viscosity formulations.
    read more
  • Polyurethane Rheology Modifier Thickener
    Polyurethane Rheology Modifier Thickener TH-40
    TH-40 thickens and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles.
    read more
  • High performance wetting agent
    High performance wetting agent WET-245
    WET-245 is a high wetting agent modified by polyether siloxane copolymer. It has excellent substrate wetting, anti-crater effect and flow promotion performances. It is widely used in all kinds of water based and solvent based system.
    read more
  • Silicone wetting agent
    Silicone wetting agent for aqueous coatings WET-267
    WET-267 is a silicone wetting agent with low viscosity and low surface tension. Imparts good spreading and wetting properties. Improves the wetting of water printing inks on high slip PE, PP and PET used in packaging.
    read more
  • Low foaming organic silicone wetting agent
    Low foaming organic silicone wetting agent WET-270
    WET-270 is a low foaming silicone wetting agent with low viscosity and low surface tension. Imparts good spreading and wetting properties. Excellent anti-crater effect with flow promotion in water based, solvent based and radiation-curing formulations.
    read more
  • Low foaming organic silicone wetting agent
    Modified trisiloxane ethoxylate wetting agent/spray adjuvant WET-608
    WET-608 is a superspreading surfactant/wetting agent based on a trisiloxane ethoxylate. It lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants.
    read more
  • Polyether modified polysiloxane spray adjuvant
    Modified heptamethyltrisiloxane spray adjuvant WET-618
    WET-618 is a high superspreading surfactant modified by trisiloxane ethoxylate with super low surface tension. It lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants.
    read more
  • Silicone-containing surface slip agent
    Silicone-containing surface slip agent SL-333
    SL-333 is a polyether modified polydimethylsiloxane. It strongly increases surface slip and greatly improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it also increases anti-blocking properties.
    read more
  • Organic silicone slip and anti-blocking additive
    Organic silicone slip and anti-blocking additive SL-482
    SL-482 is a slip and anti-blocking additive with utmost effectiveness. It has excellent slip and anti-blocking properties in topcoat, pigmented and waterborne systems.
    read more
  • Crosslinking agent
    Hydrophilic aliphatic polyisocyanate PUC-3100
    Description Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). As the hardener/crosslink agent for high-quality aqueous two-component polyurethane systems, it can improve the property profile of aqueous coating and adhesive systems. Type Hydrophilic aliphatic polyisocyanate Key features Solvent-free Improve adhesive and water resistant Applied to aqueous two-component polyurethane systems Can be added to OH-free dispersions to improve their property profiles Typical properties Appearance:                   Milky white liquid Monomeric HDI (%):       <0.15 Density (g/ml):                1.16 NCO content (%):           17.4 ± 0.5 Viscosity (25℃):             2000-3500cP Equivalent weight:         approx. 241 Color value (Hazen):     <60 Application -Crosslinking agent -Hardener for coatings Storage and handling Available in 200 kg/ barrel or 25 kg/ barrel Store products in tightly closed original containers at 5-40℃ Shelf life: 6 months from delivery date According to non-dangerous goods transport
    read more
  • Silane coupling agent
    Silane coupling agent KH-570
    KH-570 Silane coupling agent contains active groups that can react chemically with both the inorganic and organic substances, which can couple the organic substances and the inorganic substances, and can greatly improve the electrical property, resistance to water, acid/alkali and weathering. It is mainly used as surface treatment agent of glass fibre, also widely used in the surface treatment of micro glass bead, silica hydrated white carbon black, talcum, mica, clay, fly ash etc. It can also enhance the over-all property of polyester, polyacrylate, PNC and organosilicon etc.
    read more
  • Defoamer
    Polydimethylsiloxane Emulsion Defoamer DF-7133
    Description DF-7133 is a kind of silicone defoam emulsion. It is specially developed for oil field and gas plant. It helps preserve foam control under the severe conditions of a dehydrating unit. Type Polydimethylsiloxane Emulsion Key features Comparable with SAG 7133 Very quick foam knockdown Excellent stability at high temperatures Excellent antifoarn stability and durability Low concentrations can provide effective foam control Typical properties Appearance: White milky emulsion Active content (%): 12% Viscosity (25°C, mPa.s): 400-600 Density (g/cm3): 1.0 pH (25℃): 7 Emulsion Type: Non-ionic Solubility: Soluble in water Application -Gas plant -Oil field -Papermaking process etc. Recommended dosage: 0.05-0.5% additive (as supplied) based upon total formulation.  Storage and handling Available in 25 kg/barrel or 200kg/barrel Store products in tightly closed original containers at 5-40℃ Shelf life: 12 months from delivery date According to non-dangerous goods transport
    read more
  • Polyether modified polysiloxane spray adjuvant
    Polyether modified polysiloxane spray adjuvant WET-628
    Description Polyether modified polysiloxane spray adjuvant WET-628 is a high permeability surfactant/wetting agent based on a polysiloxane. It lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants. Type Polyether modified polysiloxane Key features Nonionic Medium spreading High permeability Promotes spray volume reduction Promotes rapid uptake of agrochemicals (rainfastness) Superspreader for soluble liquid and emulsifiable concentrate formulations Typical properties Appearance:                                    Colorless clear liquid Active content (%):                           100% Density (g/cm3):                               1.01 Viscosity (cp, 25 ℃):                        100-130 Cloud Point (0.1 wt%), (℃):              49 CAS:                                                 No. 27306-78-1 Surface tension (0.1%, dyn/cm):      <22.5 Application -Plant Growth Regulators            0.025% to 0.05% -Herbicide                                    0.025% to 0.15% -Insecticide                                  0.025% to 0.1% -Fungicide                                    0.015% to 0.05% -Fertilizers and Micronutrients     0.015% to 0.1% Note: use rates are dependent on crop, agrochemical and spray volume requirements. Storage and handling Available in 25 kg/barrel or 200kg/barrel Store products in tightly closed original containers at 5-40℃ Shelf life: 12 months from delivery date According to non-dangerous goods transport How to use IN AGROCHEMICAL FORMULATIONS -WET-628 may be used as a component in agrochemical formulations. Although organosilicone surfactants are subject to hydrolysis under acidic or basic conditions, optimum performance is achieved by buffering the formulation to pH 6.5-7.5. Additionally, it is recommended that WET-628 spray adjuvant be used at a concentration of at least 5%,based on the total formulation. A TANK MIX ADJUVANT -WET-628 spray adjuvant, when used as a tank-side adjuvant may be used to improve spray coverage, improve uptake or to allow for a reduction in spray volume. WET-628 spray adjuvant is most effective as a tank-side adjuvant when spray mixtures are 1) within a pH range of 5-8, and 2) used within 24 hours of preparation. -High spray volumes, coupled with high surfactant rates, are not required to achieve sufficient coverage with WET-628 spray adjuvant. In fact, it has the potential to provide adequate coverage in many low volume spray applications at rates between 0.025% and 0.1%.
    read more

Copyright © 2015-2017 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.Powered by dyyseo.com

top