Categories
new blog
Product Overview The product is made of sol-gel process, with inorganic nano sol as binder, with inorganic high temperature resistant pigments and functional inorganic fillers, cured by heating, to produce a ceramic like inorganic coating film.The main components of the coating film are Si(silicon), O (oxygen), A1 (aluminum), Ti (titanium) and so on. The coating film has high hardness, delicate fe...
The appearance of non-stick pan provides conditions for healthy cooking with less oil, and also makes cooking utensils more convenient to clean. However, in the non-stick frying pan into life at the same time, the safety of its coating has never been questioned.There are two main coating processes for non-stick frying pans: one is the traditional coating process, Teflon coating (PTFE); The second ...
Water-based single-component protective film adhesive is an environmentally friendly adhesive prepared by using natural polymer or synthetic polymer as adhesive and water as solvent or dispersant instead of toxic organic solvents that pollute the environment.Existing water-based adhesives are not 100% solvent-free and may contain limited volatile organic compounds as additives to their water-based...
Preparation method of waterborne acrylic emulsion 1.The preparation of water-based acrylic emulsion: the raw materials including acrylic hard monomer, acrylic soft monomer and acrylic functional monomer all acrylic monomer, emulsifier, water added to the pre-emulsifying kettle, emulsifying 30 ~ 40min.A non-stratified emulsion is obtained. Then the remaining water, remaining emulsifier and buffer a...
"Non-stick pan" is a very common pot in the kitchen, because in the process of using less oil consumption, less smoke, but also not easy to paste the problem, so it is welcomed by many people. In recent years, however, there have been more and more controversies about non-stick pans: Some people think that non-stick coating will produce toxic substances, can not be used for a long time; Some peopl...
Application Acrylic emulsion is a kind of emulsion with wide applicability for construction. It can be used as a new chemical material for repairing steel structure concrete of hydraulic construction, port construction, highway, bridge, metallurgical chemical industry (urea chloro gangue) and other industrial civil buildings, such as seepage prevention, corrosion prevention and antifreeze. Cl...
Water-based adhesion enhancer Product introduction Water-based adhesion enhancer, a water-based chlorinated PP acrylic emulsion, used to improve the adhesion effect of water-based paint and ink on polypropylene (PP) material. Suitable for PP substrate, can do bottom, surface coating paint. Product specifications Composition: acrylic modified emulsion Appearance: Milky white viscous liquid Non-vola...
First: Teflon coating introduction Industrial Teflon coating is suitable for plastic rubber mold, ball mold, glove mold, latex mold, roller, conveyor belt, mechanical parts and other surface treatment, containing "FEP" and "PTFE" polytetrafluoroethylene ingredients with high-performance resin, divided into the bottom coating and surface coating a total of two layers, has the best anti-corrosion, h...
The primer sprayed on the plastic surface can promote the effective adhesion between the glue and the material, increase the adhesion between the adhesive and the plastic, and solve the problem of degumming, and the main role of the primer is to solve the problem of degumming in the adhesive process. One: The definition of primer? The base coating agent is a base coating treatment agent that assis...
Water-based pressure-sensitive adhesive is a type of adhesive that uses water as a solvent and is pressure-sensitive, that is, it can adhere quickly to the surface when slight pressure is applied. Due to its environmental protection, non-toxic, cost-effective, adjustable viscosity and other advantages, it has gradually become the mainstream product in the pressure sensitive adhesive market. Accord...
The foam problem in water treatment has troubled many people, debuting the initial foam, surfactant foam, impact foam, peroxide foam, circulating water treatment with non-oxidizing fungicide generated foam, etc., so the use of defoamer in water treatment is more common, this article comprehensively introduces the principle, classification, selection and dosage of defoamer! Methods of foam eliminat...
1. The effect of membrane material There are dust adsorption, particle impurities, poor plasticization and other crystal points in the film. The moisture absorption on the film surface of the material and the precipitation of additives in the material will cause composite bubbles. The thickness of the film should be as uniform as possible, if the distribution is uneven, it is easy to cause the imb...
Acrylic paint is a fast drying paint made from pigments suspended in acrylic polymer emulsions and plasticizers, silicone oils, defoamizers, stabilizers, metal soaps. Acrylic paint is water-soluble, but becomes resistant to water when dried.Depending on the amount of paint diluted with water, or modified with acrylic gels, media, or pastes, the final acrylic paint can resemble watercolor, gouache,...
First, environmental performance VOC content Needless to say, water-based wood paint is perfect in this respect, water-based wood paint is based on water as a solvent with ultra-low VOC content, and will not produce pungent odor during construction. Nitrocellulose paint and polyester paint add organic solvents, and their products contain benzene, toluene, xylene and its derivatives, whic...
The difference between water-based paint and paint: Compared with paint, water-based paint, its wear resistance, and aging resistance have been significantly improved, compared with traditional paint, water-based paint is more affordable, more easily used by people, and less harmful. Water-based paint, water as diluent, with wear-resistant, aging resistance, easy to use and other characteristics, ...
Laminating glue is currently a kind of strong glue widely used in the market, so what is the application processing process of laminating glue? The application processing technology of laminating glue is as follows: 1, the composite method is dry composite, that is, the coating machine should use a dry composite machine with curing furnace and composite roller heating. 2, curing furnace ambient te...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية