Categories
From the development of printing industry in developed areas of the future development track can be considered in China's packaging and printing industry to take the road of environmental protection is an inevitable trend, and the environmental protection of ink plays an increasingly important role.Although the stage has not yet established green ink or environmental protection ink discrimination ...
Water-based ink resin is suitable for intaglio printing ink. The ink coating prepared with this product has good film forming ability, quick drying, high gloss, high hardness and scratch resistance, good film forming ability on the surface of paper foil and good compatibility with water-based pigment. Application characteristics 1 Good film formation 2 Suitable for a variety of substrates, good ad...
With the continuous enhancement of human awareness of environmental protection, environmental laws and regulations are constantly introduced and improved all industries are working together in the direction of environmental protection, green and health.With the development of flexible packaging industry, it has become an inevitable trend to reduce and remove organic solvents used in compounding.Wa...
Acrylic pressure sensitive adhesive is a large range, PUR is one of them, most of the acrylic pressure sensitive adhesive is heated operation, can be reheated after bonding, is reversible.And PUR is wet reaction acrylic pressure sensitive adhesive, heating operation, after bonding and moisture in the air reaction, after the reaction is irreversible (that is, heating will not melt). So PUR is more ...
◆ The procedure of bonding process:◆ The adhesive surface should be evenly coated to ensure infiltration, as far as possible to avoid bubbles, due to the porosity of the adhesive strength greatly reduced, resulting in degumming.Attention should be paid to the alignment of the position, not staggered, can be pressurized, air exclusion, make it close contact. Time is three important parameters of cu...
Composition of pressure sensitive tape 1.Pressure sensitive adhesive, 2.substrate 3.Primer 4.Back treatment agent 5.Isolation paper The main components of the pressure sensitive adhesive and resin, including rubber such as polyacrylic acid ester or polyvinyl ether, homogeneous base material requirements, small scale and good to solvent invasive, including, (1) fabric such as cotton, glass cloth or...
The bonding effect can be achieved by applying pressure for a short time (non-aqueous solvent heating) It overcomes the solvent volatilization and drying time needed during the operation of structural adhesive, and can improve the working environment After stripping, it can be corrected without contamination and can be reused for many times Easy to operate, can greatly improve the production effic...
Waterborne Acrylic Resin Product Description: The water-based acrylic resin is made of acrylic acid and acrylate monomer through solution polymerization. Product purpose: This product can be used for water-based aluminum foil gloss and ink, water-based gravure printing paper gloss and ink, water-based carton ink manufacturing Product features:alcohol water as the main solvent, has no smell, no tox...
Printing pressure has a great influence on printing quality.Maintaining an average and constant printing pressure in the effective printing area can not only make the printing ink uniform, small color difference, but also keep the size of the printing mark.It is feasible to achieve maximum flat flat printing printing pressure But because it is the manufacturing precision of printing plate flatness...
Water-based adhesives have various kinds and different properties, which can adapt to the trend of environmental protection. The important properties of water-based adhesive are: solid content (non-volatile mass percentage), viscosity, emulsifier or surfactant total agent dosage, surface tension, pH value, particle size and distribution, film forming temperature, mechanical stability, etc.Com...
Due to the printing speed is too fast, add too much, high hardness of tap water, ink solvent surface tension size is different, excessive circulation stirring and other reasons lead to the production of foam, ink texture is uniform to ensure printing quality, bubble is destroyed uniformity, will reduce production efficiency.After the foam overflow in the tank, the foam flows into the roller, wet t...
Pressure sensitive adhesive in addition to the adhesive, but also to add adhesive and other auxiliary substances. 1.The adhesive of the pressure sensitive adhesive has rubber or synthetic resin and other materials, its role is to give the adhesive layer enough cohesion strength and adhesion, the dosage is 30%-50%. 2.Viscosifier. Viscosifier rosin and its derivatives, petroleum resin, etc., it...
The fluidity of ink includes viscosity, adhesion, viscoelasticity, and yield value and thixotropy.It mainly depends on the nature of pigment and binder, and its manufacturing process, the content of binder directly affects the fluidity of ink. In the printing press, the flow phenomenon is mainly manifested in the following three aspects: (1) When the container is poured into the ink...
After ink roller output, the flow phenomenon is called ink transfer. In the process of printing, the thickness and uniformity of the ink layer on the surface of the image and text of the plate are achieved by a series of ink rollers. Therefore, the quality of ink transfer is directly related to the ink distribution and distribution, and the smooth transfer of ink in the whole process. Generally sp...
Ink in the transfer, distribution (from the ink hopper ink, after complex transfer and distribution, until the smooth transfer to the surface of the printing sheet to form a blot), the flow phenomenon is called the transfer of ink, it is the main body of ink operation adaptability. The transfer of ink can be understood from two aspects: On the one hand, ink transfer, uniform ink and ink roller tra...
Water-based glue, when the autumn and winter season, special attention should be paid to anti-freezing treatment, according to different temperatures, the implementation of different solutions. Cautions (1) Pay attention to warmth and anti-freezing when transporting glue: when transporting below 0℃, pay attention to the warmth of the vehicle, and transport below -5℃ is prohibited; (2) Ke...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية