Categories
new blog
Due to the printing speed is too fast, add too much, high hardness of tap water, ink solvent surface tension size is different, excessive circulation stirring and other reasons lead to the production of foam, ink texture is uniform to ensure printing quality, bubble is destroyed uniformity, will reduce production efficiency.After the foam overflow in the tank, the foam flows into the roller, wet t...
Ink printing with bright color, good adaptability, ink is a certain fluidity of paste adhesive, viscosity, negative, thixotropy, liquidity, dry decides the performance of ink, printing ink to add fertilizer, to improve the ink printing eligibility, such as viscosity, viscosity, dry, etc. With the development of printing technology, the variety of ink is increasing, and there are many methods of cl...
The fluidity of ink includes viscosity, adhesion, viscoelasticity, and yield value and thixotropy.It mainly depends on the nature of pigment and binder, and its manufacturing process, the content of binder directly affects the fluidity of ink. In the printing press, the flow phenomenon is mainly manifested in the following three aspects: (1) When the container is poured into the ink...
Ink output by the ink hopper flow phenomenon called ink ink. When the ink is output by the ink roller, it is only affected by the external force of the ink roller. The flow conditions are mainly the gravity and surface tension of the ink itself, and the inking of the ink depends on its own fluidity, but also on its own flow, viscosity, yield value, thixotropy, drawing and other rheological propert...
After ink roller output, the flow phenomenon is called ink transfer. In the process of printing, the thickness and uniformity of the ink layer on the surface of the image and text of the plate are achieved by a series of ink rollers. Therefore, the quality of ink transfer is directly related to the ink distribution and distribution, and the smooth transfer of ink in the whole process. Generally sp...
Ink in the transfer, distribution (from the ink hopper ink, after complex transfer and distribution, until the smooth transfer to the surface of the printing sheet to form a blot), the flow phenomenon is called the transfer of ink, it is the main body of ink operation adaptability. The transfer of ink can be understood from two aspects: On the one hand, ink transfer, uniform ink and ink roller tra...
After the ink is transferred to the printing surface by the blanket at a certain printing speed and under a certain printing pressure, the fixation and drying speed of the ink film, as well as the color, gloss, fastness and resistance after film formation, etc. ensure the printing effect, which are collectively referred to as the printing quality suitability of the ink. It mainly includes color, p...
Feature 1.Non viscous: almost all substances are not bonded with PTFE coating. Very thin films also show good non-adhesion properties. 2.Heat resistance: PTFE coating has excellent heat and low temperature resistance characteristics. Short time can withstand high temperature to 300℃, generally between 240℃~260℃ can be used continuously, with significant thermal stability, it can work at ...
Product Overview The product is made of sol-gel process, with inorganic nano sol as binder, with inorganic high temperature resistant pigments and functional inorganic fillers, cured by heating, to produce a ceramic like inorganic coating film.The main components of the coating film are Si(silicon), O (oxygen), A1 (aluminum), Ti (titanium) and so on. The coating film has high hardness, delicate fe...
The appearance of non-stick pan provides conditions for healthy cooking with less oil, and also makes cooking utensils more convenient to clean. However, in the non-stick frying pan into life at the same time, the safety of its coating has never been questioned.There are two main coating processes for non-stick frying pans: one is the traditional coating process, Teflon coating (PTFE); The second ...
Preparation method of waterborne acrylic emulsion 1.The preparation of water-based acrylic emulsion: the raw materials including acrylic hard monomer, acrylic soft monomer and acrylic functional monomer all acrylic monomer, emulsifier, water added to the pre-emulsifying kettle, emulsifying 30 ~ 40min.A non-stratified emulsion is obtained. Then the remaining water, remaining emulsifier and buffer a...
Polyurethane (polyurethanes, abbreviated PU) is a kind of polymer with -NHCOO-repeat structural unit as the main chain. Isocyanate (monomer) is polymerized with a hydroxyl compound.Due to the strong polarity of the carbamate group, insoluble in non-polar groups, with good oil resistance, toughness, wear resistance, aging resistance and adhesion. Materials suitable for a wide temperature range (-50...
"Non-stick pan" is a very common pot in the kitchen, because in the process of using less oil consumption, less smoke, but also not easy to paste the problem, so it is welcomed by many people. In recent years, however, there have been more and more controversies about non-stick pans: Some people think that non-stick coating will produce toxic substances, can not be used for a long time; Some peopl...
Acrylic acid Important organic synthesis raw materials and synthetic resin monomer Acrylic resin is an important organic synthesis raw material and synthetic resin monomer, is a very fast polymerization rate of ethylene monomer.Is the simplest unsaturated carboxylic acid, consisting of a vinyl group and a carboxylic group. Most of them are used to manufacture methyl acrylate, ethyl ester, butyl es...
Application Acrylic emulsion is a kind of emulsion with wide applicability for construction. It can be used as a new chemical material for repairing steel structure concrete of hydraulic construction, port construction, highway, bridge, metallurgical chemical industry (urea chloro gangue) and other industrial civil buildings, such as seepage prevention, corrosion prevention and antifreeze. Cl...
1.The role of acrylic resins in photocured inks.Acrylic resin is widely used in the manufacture of photocuring inks because of its unsaturated property and polymerization reaction under the action of ultraviolet light.It and other substances, such as polyether, carbamate, polyester, epoxy resin, modified epoxy resin, poly caprolactam copolymer, can be used as a photocuring ink resin component. 2.T...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية