Categories
new blog
Ink in the transfer, distribution (from the ink hopper ink, after complex transfer and distribution, until the smooth transfer to the surface of the printing sheet to form a blot), the flow phenomenon is called the transfer of ink, it is the main body of ink operation adaptability. The transfer of ink can be understood from two aspects: On the one hand, ink transfer, uniform ink and ink roller tra...
Water-based single-component protective film adhesive is an environmentally friendly adhesive prepared by using natural polymer or synthetic polymer as adhesive and water as solvent or dispersant instead of toxic organic solvents that pollute the environment.Existing water-based adhesives are not 100% solvent-free and may contain limited volatile organic compounds as additives to their water-based...
Protective film glue transfer, there are a variety of factors, I believe that in the work, many teachers will also encounter a similar situation.The phenomenon of the so-called glue transfer is uneven coating or in the process of transportation, the glue shift remains on the surface of the profile, commonly known as glue transfer. Protective film glue transfer can be divided into the followin...
Anti -deformation power Anti -deformation capacity refers to a certain deformation after the composite product is affected by external forces, and this deformation will produce a certain amount of elasticity, especially the thin film. If the combination of composite is not enough to resist the elasticity of the return, foaming will occur, etc. Happening. There are many processes that produce defor...
Thirteen.Skinning There are two common skin phenomena: one is in the packaging bucket of glue surface skin, the other is in the glue tray surface skin. ■ The surface layer of glue in the packing bucket produces crusts 1)If the temperature of glue filtration packaging is too high, it is easy to form crust in the barrel when the temperature drops, which is common in high temperature in summer. Becau...
Screen printing UV pressure sensitive adhesive and screen printing water-based pressure sensitive adhesive, has the following different characteristics: because UV curable pressure sensitive adhesive does not contain water or organic solvent, so it can be cured without heating drying channel, and water-based pressure sensitive adhesive to water as diluent, need a lot of heat to volatilizing water;...
Water-based adhesive with high polymer, water-soluble resin as the main raw materials, water as the solvent, less odor, environmental protection. With the continuous improvement of people's environmental awareness, water-based adhesives have become the mainstream of the market in recent years. Characteristics of water-based adhesive 1.Applicable to the substrate any kind of adhesive is not om...
Polyurethane (PU) is a kind of organic polymeric compounds containing repeated carbamate group (NHCOO) in the main chain.Polyurethane polymer materials have the advantages of wear resistance, high temperature resistance, good adhesion, easy processing, low price, but some polyurethane water resistance, heat resistance is poor, need to be modified by specific methods, in order to achieve the purpos...
Water-based coating is an effective means to process the surface of printed matter, to improve the gloss and strength of the surface of printed matter, enhance the aesthetic effect, temperature resistance, water resistance, wear resistance, improve the grade of printed matter and commodity value. Therefore, to measure the quality of the coating, it is also necessary to examine the brightness, stre...
Together to understand the characteristics of water-based acrylic emulsion! 1.Excellent adhesion The polymer structure of water-based acrylic emulsion contributes to the flow and wettability of molecular chains on the substrate surface, making the coating and substrate molecules in close contact, to achieve high adhesion 2.High load-bearing capacity of the makeup filler can significantly reduce th...
Preparation method of waterborne acrylic emulsion 1.The preparation of water-based acrylic emulsion: the raw materials including acrylic hard monomer, acrylic soft monomer and acrylic functional monomer all acrylic monomer, emulsifier, water added to the pre-emulsifying kettle, emulsifying 30 ~ 40min.A non-stratified emulsion is obtained. Then the remaining water, remaining emulsifier and buffer a...
Acrylic resin is made of acrylic ester and methacrylate and other alene monomers copolymerization resin, through the selection of different resin structure, different formula, production process and solvent composition, can be synthesized different types, different performance and different application of acrylic resin, Acrylic resin can be divided into thermoplastic acrylic resin and thermosettin...
Polyurethane (polyurethanes, abbreviated PU) is a kind of polymer with -NHCOO-repeat structural unit as the main chain. Isocyanate (monomer) is polymerized with a hydroxyl compound.Due to the strong polarity of the carbamate group, insoluble in non-polar groups, with good oil resistance, toughness, wear resistance, aging resistance and adhesion. Materials suitable for a wide temperature range (-50...
After the composite product has been cured at a certain temperature and time, the interlayer peeling composite film adhesive layer still has a certain viscosity, that is, after the composite film peeling, the two-layer film will be re-glued together by hand, and the severe drying of the composite film adhesive layer will directly affect the peeling strength of the composite film, while the slight ...
I.Overview: Refilm process is widely used in all kinds of packaging, small to medicine box, artifact box, large to outer packing boxes and various product packaging.The current recoating technology includes precoating, dry recoating and wet recoating.Wet composite uses water-soluble adhesive cold paste process. Dry composite traditional composite film process is to apply solvent-based adhesive dir...
Water-based adhesive with high polymer, water-soluble resin as the main raw materials, water as the solvent, odor is small, environmental protection and non-toxic. With the continuous improvement of people's environmental awareness, water-based adhesives have become the mainstream of the market in recent years. In practical application, some packaging and printing manufacturers do not know enough ...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية