Categories
new blog
Waterborne paint formulation design system - pH regulator Waterborne wood coatings may also need to adjust the pH when necessary.Most emulsions or aqueous dispersions have been adjusted to a pH of 8 to 9 when they are produced, eliminating the need for pH adjusters when making paint.If the pH value is different, add 0.05% to 0.1% of the pH adjuster during the paint making process, and adjust the p...
Wood coating process 1.There are many large holes in the hard wood, putty or hole adding agent to flatten; 2.Apply closing primer after hole filling； 3.If you need to deepen the surface texture of the wood and highlight the wood grain, you can apply the closed primer and apply the water color； 4.After conditioning the wood grain, apply two closed primer； 5.Finish with top coat. Sinograce Chemical ...
Adhesion type and adhesion property of paint film on substrate The adhesion of the paint film to the substrate is divided into two types: mechanical adhesion and chemical attachment.Mechanical adhesion depends on the properties of the coated sheet (roughness, porosity) and the strength of the formed film; chemical adhesion refers to the mutual attraction of the paint film molecules and the plate m...
Cohesion and thermal expansion coefficient of paint film The force caused by the cohesion of molecules of the same substance is called cohesion.The more cohesive the coating, the worse the adhesion.In the drying process of paint, with the increase of solvent volatilization and crosslinking degree, the cohesion between film forming material molecules increases, the film produces shrinkage phenomeno...
The adhesion of the paint film is caused by the mutual attraction between the paint and the polar groups on the surface of the coated substrate, and the mutual attraction between the polar groups is based on the premise that the paint is well wetted on the surface of the coated substrate.Since the wet condition of the coating on the surface of the coated substrate depends on the surface tension of...
Water - based acrylic emulsion formulation needs to be considered: water - based acrylic resin composition The choice of emulsion raw materials is the most important decision for engineers when formulating aqueous paint formulations.The main properties of the coating are determined by the resin.A wide variety of water-based acrylate emulsions, including polystyrene-acrylate emulsions, are on the m...
The internal structure of waterborne acrylic emulsion particles will affect several aspects of waterborne paint formulations.According to the order in which the effects are affected, the phase structure will first affect the selection and addition of the filming aid.Different phases have different hydrophilic/lipophilic characteristics, and the oleophilic properties of various coalescents are diff...
What parameters of resin determine coating gloss? Question: What parameters of the resin determine the gloss of the film? Some people say that it is solid content, some people say it is OH value. So, what is the most important determinant of gloss? Answer: There are many parameters that determine the gloss of the paint film. The saturation of the resin: that is, its monomer structure, this index d...
1.The tool Before using the soft brush, thoroughly soak it in clean water, remove excess water, and do not drip. The enamel paint should only reach half the length of the bristles.Brush as fast as possible, gently and smoothly brush the wood grain, do not apply it back and forth repeatedly, because the water-based paint is fast drying and the opening time is short, so it should be completed as soo...
3.Process variations of different paint types-Waterborne wood paint application process 2 Applying a matt lacquer to the varnish can change the coating to a matte finish, while applying a varnish to a matt lacquer reduces the brightness of the film and does not achieve maximum brightness and transparency. The color paint of waterborne wood lacquer can be divided into two types: coloured coating an...
Material property (pu for short) is divided into: Pouring polyurethane elastomer (CPU for short) is one of the most widely used polyurethane elastomers with the largest yield. Thermoplastic polyurethane elastomer (TPU) -- thermoplastic polyurethane elastomer accounts for about 25% of the total amount of polyurethane.Mixed polyurethane elastomer (MPU) - accounts for about 10% of the total amount of...
1.Paper-based coating resins have been switched from natural water-based resins such as celluloses to synthetic resin emulsions such as carboxystyrene butadiene emulsions, polyvinyl acetate emulsions, and acrylic emulsions, among which acrylic emulsions have more excellent properties.However, the above resins are still difficult to meet the higher requirements for the development of coated paper. ...
Glass fiber is an important reinforcing material for the manufacture of fiber reinforced plastics (FRP), and is also used for weaving high temperature resistant fiber cloth.But the glass fiber that has not been treated is brittle, easy to take static electricity after friction, and the surface is smooth, when making the reinforcing material of the resin is not easy to stick with the resin.In the m...
Thank you for the New Year gift of our company. In the New Year, we hope to make our products better and serve our customers better,Hope the performance increase day! Sinograce Chemical wish you a happy New Year!
1.The cause of a back adhesion： (1)the paste itself anti-viscosity, especially in the wet weather easy to stick back; (2)After the printing is completed, it is packaged without perfect heat treatment; (3)adjust the slurry formula is not appropriate, adding too much transparent slurry easy to cause back adhesion; (4)transport or storage conditions are not good, in high temperature, high humidity co...
One, extinction principle General can be divided into physical extinction and chemical extinction.Physical matting, is the addition of matting agent, so that the coating in the film when the uneven surface, reduce reflection and achieve low gloss. Two, the kind of matting agent Coating common matting agent can be divided into organic matting agent and inorganic matting agent two categories. 1.Orga...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2026 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.
top
English
français
русский
español
العربية