Categories
new blog
1.Ink The three primary color inks have different degrees of color bias, which will affect the color bias of the whole picture to different degrees. However, a small amount of color bias can be corrected from the ink preparation. When printing to grasp the gray balance of the ink used, the same amount of yellow, product, green do not produce neutral gray, they produce lighter, more turbidity with ...
Insufficient or uneven amount of glue due to insufficient amount of glue produced by the white spot can be observed in the composite machine. In the dry composite process, the coated adhesive must be able to fill the bumps and bumps on the surface of the ink and film to avoid appearance defects such as obvious white spots. When the water-based adhesive dry composite is used to produce lightweight ...
The final state of waterborne polyurethane is a solid film. During the process from emulsion to solid film, accompanied by the evaporation of water and the concentration of water dispersion, the latex particles are close to each other. Before the solid content reaches 74%, the dispersion particles can move in the continuous phase of water. Under the influence of water/air interfacial tension, the ...
Water based polyurethane emulsion has soft properties, so that it has good adhesion when attached to the surface of the object; At the same time, it can maintain a certain strength and does not crack. It is especially suitable for articles in high temperature, humid and chemically corrosive environment. This substance also has superior wear resistance and film smoothness, so it can form a uniform ...
Waterborne Polyurethane (WPU) is a polyurethane system using water as a solvent or dispersion medium. In recent years, with the increasingly strict environmental regulations and the improvement of people's environmental awareness, waterborne polyurethane, as an environmentally friendly material, has received extensive attention and research. First, the characteristics of waterborne polyuretha...
①The residual ink is converted into gray black ink According to the principle of color science, the complementary color of the ink mixed together, its hue will become gray black (red + green, yellow + blue-purple). Therefore, we can use this principle to deploy the complementary ink into gray-black ink by deploying the special color ink, and add it to the black ink in a certain proportion to use i...
Pigment is the main component of ink, is a fine powder-like solid colored substance, can show ball, flake and other irregular shape. Generally, the diameter of pigment particles is in the range of several hundred nanometers to tens of microns (10-7~10-5m). The pigment can be evenly dispersed in the medium, but it is insoluble in the medium and does not react with the medium. Pigment is a colored b...
Most coatings are composed of a base material (one or more resin mixtures), pigments (including physical pigments and functional pigments), solvents and some small amounts of additives and other coating raw materials. In the production of coatings, after the selection of various coating raw materials necessary for coating components, the next is how to make reasonable use of the technical and econ...
Aluminum foil can also be printed with water-based ink. As a non-absorbent substrate, aluminum foil poses a major challenge to water-based ink printing. However, some aluminum foil products that require food-grade printing cannot be printed with oil-based inks, so water-based inks have become the best choice. However, due to the poor absorption of aluminum foil to water-based ink, many inexperienc...
In the process of UV flexographic printing, the viscosity of the ink is one of the key factors that affect the printing quality and effect. Choosing the right viscosity UV flexographic ink is crucial to ensure printing quality and efficiency. When adjusting viscosity, it is usually necessary to consider many factors such as printing equipment, printing materials, image details and the expected pri...
There are several main reasons for water-based emulsion breaking: 1.Large temperature changes, water-based emulsion is easy to separate into water phase and oil phase at high temperature, and easy to crystallize at low temperature. 2.The selection of emulsifier is improper, and the type and dosage of emulsifier are different, which has a great impact on the stability of emulsification. The choice ...
Before the textile coating, it is necessary to pretreat the textile surface to ensure the adhesion and quality of the coating. Common surface treatment methods are: cleaning, degreasing, polishing and so on. Cleaning can be done with hot water or solvents, degreasing can be done with alkaline or acid degreasing agents, and polishing is done by mechanical removal of surface hair. The choice of coat...
The main reason for water-based ink drying 1.Water-based ink: water-based carton ink, non-woven ink, paper towels, paper cups and paper bags and other packaging printing; 2.Water-based polishing oil series: water-based polishing oil, polishing oil, high gloss, wear-resistant, matte, waterproof, antifreeze and other environmental protection water-based products. Water-based ink drying is mainly cau...
First, resin reaction temperature standard The reaction temperature of resin is an important process parameter, which has great influence on the reaction rate, physical properties and chemical stability of resin. In general, the resin reaction temperature should be determined according to different resin types and catalyst types. The following are some commonly used resin reaction temperature stan...
Flexo is a flexible, high resolution, warped letterpress plate. In recent years, flexo printing has developed rapidly in the field of printing, and its development prospects are generally optimistic. Flexographic printing presses transfer the right amount of ink to the substrate through a unique mesh roller. The appropriate use of ink is directly related to the printing production operation and pr...
Architectural coatings mainly use water as a dispersing medium and diluent, and its advantages are that the water of the dispersing medium is non-toxic and harmless, manufacturing and storage and transportation without the danger of explosion, no pollution to the environment, and to solve the problem of excessive VOC(volatile organic compounds) of solvent-based coatings at normal temperature. Film...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية