Hot Melt Glue for deep low temperature adhesives WM1956

Description This glue is specially used for deep low temperature adhesives. It has excellent performance on many packaging materials in low temperature environment. It can be used for non-direct contact labeling of products such as food, medicine and cosmetics. It has good performance in high-speed die-cutting, waste discharge and automatic labeling.
Type Pressure sensitive adhesive
Key Features Strong initial adhesion at low temperature & excellent peeling strength
Can be attached to most flat surfaces, including cardboard, plastic film, etc. Small bottles are not recommended
Not suitable for irregular curved surfaces and particularly soft bottles
Typical Properties Appearance: Amber solid            
Solid content: 100%
Viscosity(175℃): about 15000cps     
Softening point: 80℃(Ring and ball method)

Coating thickness: 18um
Loop Tack(N/25mm): ≥12N
90°Peel Adhesion(N/25mm): ≥6N
Holding Power(H/25mm): ≥30h

Coating thickness: 25um
Loop Tack(N/25mm): ≥14N
90°Peel Adhesion(N/25mm): ≥7N
Holding Power(H/25mm): ≥30h

The lowest Labeling Temperature: -20℃
Service Temperature: -50℃~55℃

Test conditions: The test strips were placed under standard conditions of 23℃±2℃, 50%RH±5%RH for 4 hours before testing.
APPLICATION Applicable to PP (polypropylene), PET, synthetic film, coated paper, kraft paper and other surface materials, not suitable for PVC substrates

Recommended operating conditions: Suitable for all conventional slot glue and roller hot melt adhesive dispensing systems

Recommended operating temperature: 140º C to 180º C, depending on the machine, substrate, environment and other conditions

Note: Do not mix with other adhesives. The hot melt adhesive tank must be tightly covered to prevent debris from falling into and affecting the performance of the adhesive. Since hot melt adhesive must be heated when used, personal protective equipment must be worn. It is recommended to use it in a "first in, first out" cycle.
Storage and Handling 25kg/box
Store below 40°C in a dry cool place. 
Storage period: one year 
According to non-dangerous goods transport