- Home
- About Us
- Products
- News
- Contact Us
Brand:
sinograceitem no.:
WM1955Payment:
L/C、D/A、D/P、T/T、MoneyGram、Paypal other.product origin:
China AnhuiColor:
Amber solidshipping port:
Shanghai and other portsLead Time:
15-25 DaysDescription
This glue is specially used for low-temperature freezing and quick-freezing labels, it has excellent performance in many packaging applications and has a significant low-temperature refrigeration effect.
Type
Pressure sensitive adhesive
Key Features
Good initial adhesion & strong cohesion
Resistant to low temperature, suitable for permanent labels in low temperature environments
Suitable for general purpose and blank die cutting, used for ribbon printing in logistics or express delivery industry
Can be attached to most flat surfaces, including cardboard, plastic film, etc. Small bottles are not recommended
Typical Properties
Appearance:Amber solid
Solid content: 100%
Viscosity(175℃): about 11000cps
Softening point: 90℃(Ring and ball method)
Coating thickness: 18um
Loop Tack(N/25mm): ≥14N
90°Peel Adhesion(N/25mm): ≥7N
Holding Power(H/25mm):≥30h
Coating thickness: 25um
Loop Tack(N/25mm): ≥15N
90°Peel Adhesion(N/25mm): ≥8N
Holding Power(H/25mm): ≥30h
The lowest Labeling Temperature: -10℃
Service Temperature: -50℃~60℃
Test conditions:The test strips were placed under standard conditions of 23℃±2℃, 50%RH±5%RH for 4 hours before testing.
Application
Applicable to PP (polypropylene), PET, synthetic film, coated paper, kraft paper and other surface materials, not suitable for PVC substrates
Recommended operating conditions:Suitable for all conventional slot glue and roller hot melt adhesive dispensing systems
Recommended operating temperature:140º C to 180º C, depending on the machine, substrate, environment and other conditions
Note:Do not mix with other adhesives. The hot melt adhesive tank must be tightly covered to prevent debris from falling into and affecting the performance of the adhesive. Since hot melt adhesive must be heated when used, personal protective equipment must be worn. It is recommended to use it in a "first in, first out" cycle.
Storage and Handling
- 25kg/box
- Store below 40°C in a dry cool place.
- Storage period: one year
- According to non-dangerous goods transport
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top