The tackifier emulsion provided by Sinograce Chemical has a very narrow particle size distribution interval and a small average particle size, low foam, excellent storage and mechanical stability. It is used to improve the initial adhesion / peel strength, holding power properties of water-based glue/adhesive

WET-245 is a high wetting agent modified by polyether siloxane copolymer. It has excellent substrate wetting, anti-crater effect and flow promotion performances. It is widely used in all kinds of water based and solvent based system.

WET-608 is a superspreading surfactant/wetting agent based on a trisiloxane ethoxylate. It lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants.

Wetting agent wet-245 has excellent substrate wetting and leveling, widely used in all kinds of paint and ink coating system. Have good water solubility and smoothness, also can reduce the surface friction, and prevent the generation of defects such as shrinkage, orange peel.

silicone surfactant adjuvants polyether modified polytrisiloxane for agrochemicals WET-608 is a superspreading surfactant/wetting agent based on a trisiloxane ethoxylate. It lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants.

WET-245 is a high wetting agent modified by polyether siloxane copolymer. It has excellent substrate wetting, anti-crater effect and flow promotion performances. It is widely used in all kinds of water based and solvent based system.

WET-608 is is organic silicone surfactant/adjuvants for agrochemicals. Due to its low surface tension, after adding it to agro-chemicals

Silicone wetting agent for water based rubber paint WET-245 is a high wetting agent modified by polyether siloxane copolymer. It has excellent substrate wetting, anti-crater effect and flow promotion performances. It is widely used in all kinds of water based and solvent based system.

Surfactant for fertilizers agriculture wetting spreading agent WET-618 is a high superspreading surfactant modified by trisiloxane ethoxylate with super low surface tension. It lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants.

This product with base material such as cement, ceramic tile, marble with strong bonding strength.

This adhesive is suitable for substrates such as BOPP, PET, PP, coated paper, and pearlescent film. Adhesion 400g ~700g/25mm(adjustable). The long-term temperature resistance can reach above 80°C. It can be labeled at a low temperature of minus 20°C.

Description This product is suitable for substrates such as MOPP, OPP, PET, PP laminated paper, PP, etc., and can be used as an adhesive for textured paper and laminated paper. The adhesive force is adjustable from 200g to 400g/25mm, and the long-term temperature resistance can reach above 80°C.

SA2291 This product is a self-crosslinking emulsion with the advantages of small amount of glue, high peel strength, good toughness, no glue opening when exposed to moisture, deep embossing and shallow embossing, and general use on flat surfaces.

Water based Bopp and paper lamination adhesive SA-2292 is a self-crosslinking emulsion with low glue content, high peel strength, good toughness, and does not peel off when exposed to moisture. It is suitable for laminating flat printing cardboard, paper with BOPP film.

Description Water based polyurethane dispersion PU-405 is water based polyurethane dispersion with soft feel, excellent abrasion resistant. It is designed for safety gloves coating. Compatible with nitrile latex. Type Water based polyurethane Key features Co-solvent Free Formaldehyde free Very soft feel High tensile strength Excellent abrasion resistant Compatible with nitrile latex Typical properties Appearance           Milky white liquid pH                          7.0-8.0 Solid content          40±1% Charge                   Anionic Viscosity (25℃) 200-300cP Tensile strength (MPa) >25 100% Modulus (MPa) >20 Elongation (%) >700 Application -Textile coating -Textile binder -Safety gloves coating Storage and Handling Available in 200 kg/ barrel or 25 kg/ barrel Store products in tightly closed original containers at 5-40℃ Shelf life: 9 months from delivery date According to non-dangerous goods transport

Description Water based polyurethane dispersion PU-406 is water based polyurethane dispersion with soft feel, excellent abrasion resistant. It is designed for pure PU safety gloves coating with high solid content. Type Water based polyurethane Key features Co-solvent Free Formaldehyde free Soft feel High tensile strength Excellent elastic memory Excellent abrasion resistant Typical properties Appearance                    Milky white liquid pH                                   7.0-8.0 Solid content                   50±1% Charge                            Anionic Viscosity (25℃)               200-300cP Tensile strength (MPa)    >25 100% Modulus (MPa)     >20 Elongation (%)                >650 Application -Safety gloves coating -Textile coating -Leather basecoat Storage and Handling Available in 200 kg/ barrel or 25 kg/ barrel Store products in tightly closed original containers at 5-40℃ Shelf life: 9 months from delivery date According to non-dangerous goods transport