DF-7133 is a kind of silicone defoam emulsion. It is specially developed for oil field and gas plant. It helps preserve foam control under the severe conditions of a dehydrating unit.

Polyether modified polysiloxane spray adjuvant WET-628 is a high permeability surfactant/wetting agent based on a polysiloxane. It lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants.

OP-10 is a water-soluble nonionic surfactant composed of a 10-mole ethylene oxide adduct of octylphenol.

Silicone antifoam for waste water treatment DF-100 is a kind of high efficient antifoam/defoamer on all kinds of water treatment field. It can be applied to various kinds of biological sewage treatment industries, industrial sewage treatment, chemical sewage treatment, etc.

Type Phenyltriethoxysilane Typical properties Appearance:             Light yellow liquid Concent:                    98% CAS:                           780-69-8 Flash point:                42℃ Molecular Weight:     240 Boiling point:              112 Density:                      0.993±0.005g/cm3 Refractive index:       1.458 ± 0.005 Structural formula:     C6H5Si(OC2H5)3 Application -Producing phenyl silicone oil -Phenyl silicone oil feedstock -Electronic materials handling -Silicone resin crosslinking agent -Preparation of organic polymer materials Storage and handling Available in 25 kg/drum Store products in tightly closed original containers at 5-40℃ Shelf life: 12 months from delivery date According to non-dangerous goods transport

Excellent adhesion promoters Improve strength and moisture resistance Improve the filler in the polymer wetting and dispersion Increase the moisture resistance and increase the compression resilience Improve the physical and mechanical reinforced plastic dry and wet bending strength, compressive strength, shear strength, etc Enhance the cohesion and improve the mechanical, electrical, water resistance, anti-aging properties Improve the dispersion of pigment and increase of glass, aluminum, ferrous metal adhesion

Improve the physical and mechanical properties Make rubber silica and other inorganic fillers to produce good coupling effect Can be used as rust remover, active agents, coupling agents, crosslinking agents, reinforcing agents Can improve the tensile strength of the rubber, reducing its compression set, abrasion resistance improved rubber Can improve its corrosion resistance, oxidation resistance and an increase in resin and other polymer materials with adhesion surface

Feature Improve the adhesion of silicone rubber and metal Type Diethylamino substituting methyl triethoxysilane Typical properties Appearance: Light yellow transparent liquid Boiling range: 100 ~ 135℃/5mmHg Structural formula: (C2H5)2NCH2Si(OC2H5)3 Solubility: Can be dissolved dry alcohol, acetone and other organic solvents, is unstable in water, easily hydrolyzed Application -Silicone rubber curing agent -Curing agent for epoxy resins and tackifier -Used for surface treatment agent silicone rubber and metal bonding time Storage and handling Available in 25 kg/drum Store products in tightly closed original containers at 5-40℃ Shelf life: 12 months from delivery date According to non-dangerous goods transport

Enhance adhesion between the metal Improve water resistance, weather resistance

Polydimethylsiloxane with a viscosity of approx. 1000 mPa.s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils.

SA-110 is modified silicone acrylic emulsion specialized in the external wall coating. It has good properties of scrub resistance, water resistance, used for real stone paint and multicolour paint

SA-109 is modified silicone acrylic emulsion specialized in the external wall coating.It has good properties of scrub resistance, water resistance.

As temperature resistance decorative non-stick coating, it could be used on outside of aluminum non-stick cookware. Please do complete applicability test for specific use

Silicone Type Antifoam Agent Type HS code Appearance Active Ingredient Suggested Add Amount Ingredient Solvent Applications and Characteristics waterbase system solventbase system UV system SG-430 3402900090 water-write transparent solution 7% 0.1-1% Mixture of  antifoam copolymer and organosilicone aliphatic hydrocarbon 1.Excellent compatibility and fast speed of defoam ability. 2.can be used in any stage of coating producing and operating. 3.Suitable for UV and epoxy system.   √   SG-441   water-write transparent solution <3% 0.1-1% Modified polysiloxane solution Mixed aromatics 1.Excellent compatibility and fast speed of defoam ability. 2.can be used in any stage of coating producing and operating.   √   SG-472   water-write transparent solution 70% 0.1-1% Modified polysiloxane solution Mixed aromatics 1.Good compatibility and strong defoam ability. 2.Excellent foam-broken and anti foam develop ability. 3.Suitable for any stage of the coating produce and all types of the operate way like brush, roller and spray coat.   √ √ SG-467   water-write transparent solution 1% 0.1-1% Modified polysiloxane solution Isooctyl acetate 1.Good compatibility and strong defoam ability. 2.Excellent foam-broken and anti foam develop ability. 3.Suitable for any stage of the coating produce and all types of the operate way like brush, roller and spray coat.   √ √ SG-475   lemon-yellow viscous fluid 100% 0.05-1% Modified polysiloxane  … 1.Strong defoam ability and suitable for solventbase and UV system. 2.especially sutiable for defoaming and foaming off of high viscosity system.   √ √ SG-486N   feculent viscous fluid 100% 0.05-1% White carbon black modified polysiloxane … 1.High efficiency of defoaming, foam off and anti-foam development,epscially it has good effect to broke little foam. 2.Especially suitable for silk screen ink and epoxy system.   √ √ SG-419W   water-write transparent solution 60% 0.05-1% Modified polysiloxane solution dipropylene glycol monomethyl ether 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √     SG-424W   lemon-yellow viscous fluid 100% 0.05-1% Modified polysiloxane  … 1.High speed of defoaming. 2.Easy to disperse. 3.Strong defoam ability. √     SG-465W   white emulsion 50% 0.05-1% Modified organosilicone emulsion water 1.High speed of defoaming. 2.Easy to disperse. 3.Strong defoam ability. √     SG-471W   lemon-yellow viscous fluid 100% 0.05-1% Modified polysiloxane  … 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √ √ √ SG-481W   lemon-yellow feculent  viscous fluid 100% 0.05-1% Mixture of modified polysiloxane and antifoam materials … 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √ √ √ SG-485W   white emulsion 25% 0.05-1% Modified organosilicone emulsion water 1.High speed of defoaming. 2.Easy to disperse. 3.Strong defoam ability. √     SG-491W   lemon-yellow viscous fluid 100% 0.05-1% Mixture of modified polysiloxane and antifoam materials … 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √ √ √

Non-silicification Type Antifoam Agent Type HS code Appearance Active Ingredient Suggested Add Amount Ingredient Solvent Applications and Characteristics waterbase system solventbase system UV system SG-506W 34029000.9 lemon-yellow viscous fluid 100% 0.3-1% Mineral oil compound … 1.High efficiency of defoaming. 2.used in emulsion latex system. √     SG-520   lemon-yellow viscous fluid 100% 0.3-1% Non-silicification copolymer … 1.Excellent compatibility and deadly lower trend of shrinkage.2.High speed of defoaming. 3.Suitable for UV system and other high crosslinking system.   √ √ SG-530   lemon-yellow viscous fluid 100% 0.1-1% Acrylic ester copolymer … 1.High defoam ability. 2.Has great effect to thick-coat , high viscosity system, zinc stearate primer.3.Suitable for PU,UPE and epoxy system etc.   √ √ SG-552   lemon-yellow transparent solution 30% 0.1-1% Acrylic ester copolymer Mixed aromatics 1.Higher defoam efficiency and cost performance.       2.Especially suitable for thick-coat , high viscosity system and  zinc stearate primer.3.Lower trend of shrinkage   √   SG-555   lemon-yellow transparent solution 7% 0.1-1% Non-silicification copolymer solution Mixed aromatics 1.Excellent compatibility and deadly lower trend of shrinkage. 2.Lower effect to the transparency of the coat film. 3.Suitable for medium and high polar system like UV.     √ SG-557   lemon-yellow transparent solution 40% 0.1-1% Non-silicification copolymer solution Mixed aromatics 1.Excellent compatibility and deadly lower trend of shrinkage. 2.Lower effect to the transparency of the coat film. 3.Suitable for medium and high polar system like UV, epoxy and PE system.   √ √ SG-590   Water white and lemon-yellow viscous fluid 100% 0.1-1% vinyl ether compound … 1.High defoam ability. 2.Suitable for all types of solventbase system and UV system especially for coil material coat. 3.Excellent foam burst effect.   √ √

The Wetting agent for Base Materials Type HS code Appearance Active Ingredient Suggested Add Amount Solvent Ingredient Static surface tension Dynamic surface tension Applications and Characteristics waterbase system solventbase system UV system SG-304 3402900090 Water white solution 50% 0.1-1% dipropylene glycol monomethyl ether The mixture of non-siliceous surface active agent 33 38 1.Can reduce dynamic surface tension largely. 2.Excellent defoam ability, wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-342   lemon-yellow viscous fluid 100% 0.1-1% … The mixture of non-siliceous surface active agent 33 38 1.Can reduce dynamic surface tension largely. 2.Excellent defoam ability, wetting ability and anti-shrinkage property. 3.Good levelling property. √ √ √ SG-343   lemon-yellow viscous fluid 100% 0.1-1% … Modified organofluorine compound 18 45 1.Suitable for waterbase,solventbase and UV system. 2.High cloud point. 3.Excellent wetting ability and anti-shrinkage property. 4.Good water solubility and levelling property. √ √ √ SG-344   lemon-yellow viscous fluid 100% 0.1-1% … The mixture of non-siliceous surface active agent 33 38 1.Can reduce dynamic surface tension largely. 2.Excellent wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-345   lemon-yellow viscous fluid 100% 0.1-1% … polyether modified silicone oil 22 48 1.Suitable for waterbase,solventbase and UV system.2.High cloud point. 3.Excellent wetting ability and anti-shrinkage property. 4.Good water solubility and levelling property. 5.Using under PH 6-8 √ √ √ SG-346   lemon-yellow transparent solution 50% 0.1-1% dipropylene glycol monomethyl ether polyether modified silicone oil solution 23 48 1.Suitable for waterbase,solventbase and UV system. 2.Can reduce surface tension largely. 3.Excellent wetting ability and anti-shrinkage property. 4.Can be used in more PH range. √ √ √ SG-347   lemon-yellow viscous fluid 100% 0.1-1% … non-ionic surface active agent compound 33 38 1.Excellent dynamic surface activity and strong hydrophilic property .2.Excellent wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-348   lemon-yellow transparent fluid 100% 0.1-1% … polyether modified silicone oil 23 48 1.Suitable for waterbase,solventbase and UV system 2.Excellent fast-levelling effect. 3.Can reduce surface tension largely. 4.Excellent wetting ability and anti-shrinkage property. 5.Good levelling property and hydrolysis resistance. 6.Can be used in more PH range. √ √ √ SG-349   lemon-yellow transparent fluid 100% 0.1-1% … polyether modified silicone oil 23 48 1.Suitable for waterbase,solventbase and UV system. 2.Excellent fast-levelling effect. 3.Can reduce surface tension largely. 4.Excellent wetting ability and anti-shrinkage property. 5.Good levelling property and hydrolysis resistanc. 6.Can be used in more PH range. √ √ √ SG-360   lemon-yellow viscous fluid 100% 0.1-1% … polyether modified silicone oil 22 52 1.Suitable for waterbase,solventbase and UV system. 2.Excellent fast-levelling effect. 3.Can reduce surface tension largely. 4.Excellent wetting ability and anti-shrinkage property. 5.Good levelling property √ √ √ SG-364   lemon-yellow viscous fluid 100% 0.1-1% … non-ionic surface active agent compound 26 30 1.Excellent dynamic surface activity and strong hydrophilic property. 2.Excellent wetting ability and anti-shrinkage property.  3.Good levelling property. √     SG-375   lemon-yellow viscous fluid 100% 0.1-1% water non-ionic surface active agent compound 32 51 1.Excellent dynamic surface activity 2.Excellent wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-378   lemon-yellow Transparent fluid 100% 0.1-1% … polyether modified silicone oil 21.5 48 1.Suitable for waterbase,solventbase and UV system. 2.Can reduce surface tension largely. 3.Excellent wetting ability and anti-shrinkage property. 4.Good levelling property and can be used under PH 6-8. √ √ √ SG-379   lemon-yellow viscous fluid 100% 0.1-1% … polyether modified silicone oil 21.5 48 1.Suitable for waterbase,solventbase and UV system. 2.Can reduce surface tension largely. 3.Excellent wetting ability and anti-shrinkage property. 4.Good levelling property and can be used under PH 6-8. √ √ √