Categories
new blog
Cold winter can not stop the fiery heart, amiable yadav, traveled across the sea traveled to Anhui sinograce in the Nien water based adhesive business negotiations for the cooperation between the two sides opened the first step to success, I believe we will be more and more cooperation in the further.
Characteristics of water-based pressure-sensitive adhesive: 1. Diluted with deionized water 2. At room temperature (25 ~ 30 ℃), the glue sizing 24 hours after the bonding force to reach the maximum, can be tested. At low temperatures, the glue drying time is longer, should be based on the actual situation after the test time or sizing as much as possible after the use of heating b...
1. acrylic water-based paint The use of acrylic emulsion as the main component, the main feature is good adhesion, will not deepen the color of wood, but the wear resistance and chemical resistance is poor, the film hardness is soft, fullness is poor, comprehensive performance in general, film Good construction is easy to produce defects. It is suitable for water-based wood primer, matte finish. B...
Chemical properties and performance of water-based pressure-sensitive adhesive mainly reflect in the following nine aspects: 1. Adhesive properties 2. Infiltration performance 3. Anti - peel performance 4. Early sticky and sticky performance 5. Creep shear resistance 6. Temperature resistance 7. Flame retardant 8. Anti-aging, anti-oxidation 9. ...
1. Water-based polyurethane pressure-sensitive adhesive for its environmentally friendly non-polluting characteristics, the future will become the ultimate direction of development of pressure-sensitive adhesive; cost slightly higher than the acrylic, generally used for relatively high-end industries. 2. Solvent-based pressure-sensitive adhesive as a result of a v...
Introduction: Water-based adhesives to water as a dispersion medium adhesive, is a major category of environmentally friendly adhesives. The solvent-based adhesive is a homogeneous system with organic solvents such as benzene and toluene as the dispersion medium. The water-based adhesive is a heterogeneous system with water as the dispersion medium. Classification: Water as a disper...
The Selection of good quality water-based adhesive not only help to improve the production efficiency, but also to protect the appearance of the product quality. Such as widely used in the field of self-adhesive water-based pressure-sensitive adhesive, such as water-based pressure-sensitive adhesive which is widely used in the field of stickers. This adhesive has many advantages, it is particularl...
Some of the traditional glue in the adhesion of a great advantage is good adhesion, and the efficiency is very low, the most important thing is relatively low cost, most are someorganic materials. Relatively speaking,the biggest advantage of water-based adhesive is green, the traditional glue is inorganic materials, so it is not very environmentally friendly, pollution is relatively large, water-b...
The exterior wall stone paint of the building is really natural, after the paint is dry,it is like a real stone, and the colors are warm and natural, and the color is fresh and nice. Perhaps a lot of friends, for this anti-stone coating is not very understanding, so,will inevitably feel very strange, then this material really have these advantages? In fact, this anti-stone coating not only has the...
Colorful paint is mainly used in imitation stone effect, so also known as liquid stone and the horizon exterior paint.is composed of incompatible two-phase components, one of the dispersion medium for the continuous phase, the other phase for the dispersed phase. Painting, through a one-time spray, you can get luxury, beautiful, colorful patterns. The pattern formed by the one-time spraying is com...
1.Energy conservation: Water in water multicolor coating, pure water-based formula, excellent raw material technology.Granite stone, depending on nature, the development of powerful resources have some damage to the ecological. Water covered with colorful paint to solve this problem, and decorative curtain wall color can be artificially controlled, energy saving and environmental protection,commen...
Water-in-water multi-color paint spray guns to use most of the spray, for the operation, but also because of the improper use of the gun caused by uneven distribution of the coating,the following together to see how to solve it. The smaller the gun distance, the greater the pressure of the spray, the greater the impact of the product by the pressure of the water, water-in-watercolorful paint coati...
water-based resin | water-based industrial coating (a) water paint common problems Water based paint common problem: bubble - big bubble Large bubbles are large, visible bubbles that are visible to the naked eye. Bulk bubbles generally occur during the production or application of water-based paints. Possible solutions: 1. Use appropriate defoaming agents In the process of producing water-based pa...
Phenomenon : Part of the water-based paint film from the primer uplift, which contains gas or liquid, showed uneven distribution. Cause 1.When the water-based paint is applied, the dry water-based paint film is exposed to rain. 2.Apply a water-based paint primer to the wet substrate. 3.Water - based paint film is affected by acid - base and heat. Amelioration 1.Considering the gas phase conditions...
Phenomenon: Wood coating water - based varnish after the grain fuzzy, grain color and luster differ, failed to retain the original style of wood. cause 1.Transparent putty transparency is poor or scraping too thick, reduce the clarity of wood grain. 2.Water-based paint storage time is too long, pigment precipitation, on the shallow under the deep operation without mixing evenly, coating film thick...
Common problem of lacquer of waterborne woodwork: varnish besmear film is not level off, burnish is not even Phenomenon : Wood is filled with putty hole processing, after sealing the bottom, coating brush varnish, coating film flatness is low, luster is not uniform. Cause : Hole putty poor quality, loose, solvent absorption. The wood fiber and pith ray on the wood surface are relatively loose. The...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية