Categories
new blog
Pressure sensitive adhesive in addition to the adhesive, but also to add adhesive and other auxiliary substances. 1.The adhesive of the pressure sensitive adhesive has rubber or synthetic resin and other materials, its role is to give the adhesive layer enough cohesion strength and adhesion, the dosage is 30%-50%. 2.Viscosifier. Viscosifier rosin and its derivatives, petroleum resin, etc., it...
Now, people's environmental awareness is getting stronger and stronger, and many glue manufacturers are also seeking to transform themselves. Some water-based glue or oil-based glue are produced. Today, we will take water-based glue and oil-based glue as an example to talk about the difference between them. First, the difference between water-based glue and oily glue The first difference is that t...
The fluidity of ink includes viscosity, adhesion, viscoelasticity, and yield value and thixotropy.It mainly depends on the nature of pigment and binder, and its manufacturing process, the content of binder directly affects the fluidity of ink. In the printing press, the flow phenomenon is mainly manifested in the following three aspects: (1) When the container is poured into the ink...
Ink output by the ink hopper flow phenomenon called ink ink. When the ink is output by the ink roller, it is only affected by the external force of the ink roller. The flow conditions are mainly the gravity and surface tension of the ink itself, and the inking of the ink depends on its own fluidity, but also on its own flow, viscosity, yield value, thixotropy, drawing and other rheological propert...
After ink roller output, the flow phenomenon is called ink transfer. In the process of printing, the thickness and uniformity of the ink layer on the surface of the image and text of the plate are achieved by a series of ink rollers. Therefore, the quality of ink transfer is directly related to the ink distribution and distribution, and the smooth transfer of ink in the whole process. Generally sp...
Ink in the transfer, distribution (from the ink hopper ink, after complex transfer and distribution, until the smooth transfer to the surface of the printing sheet to form a blot), the flow phenomenon is called the transfer of ink, it is the main body of ink operation adaptability. The transfer of ink can be understood from two aspects: On the one hand, ink transfer, uniform ink and ink roller tra...
After the ink is transferred to the printing surface by the blanket at a certain printing speed and under a certain printing pressure, the fixation and drying speed of the ink film, as well as the color, gloss, fastness and resistance after film formation, etc. ensure the printing effect, which are collectively referred to as the printing quality suitability of the ink. It mainly includes color, p...
Feature 1.Non viscous: almost all substances are not bonded with PTFE coating. Very thin films also show good non-adhesion properties. 2.Heat resistance: PTFE coating has excellent heat and low temperature resistance characteristics. Short time can withstand high temperature to 300℃, generally between 240℃~260℃ can be used continuously, with significant thermal stability, it can work at ...
Product Overview The product is made of sol-gel process, with inorganic nano sol as binder, with inorganic high temperature resistant pigments and functional inorganic fillers, cured by heating, to produce a ceramic like inorganic coating film.The main components of the coating film are Si(silicon), O (oxygen), A1 (aluminum), Ti (titanium) and so on. The coating film has high hardness, delicate fe...
The appearance of non-stick pan provides conditions for healthy cooking with less oil, and also makes cooking utensils more convenient to clean. However, in the non-stick frying pan into life at the same time, the safety of its coating has never been questioned.There are two main coating processes for non-stick frying pans: one is the traditional coating process, Teflon coating (PTFE); The second ...
Water-based single-component protective film adhesive is an environmentally friendly adhesive prepared by using natural polymer or synthetic polymer as adhesive and water as solvent or dispersant instead of toxic organic solvents that pollute the environment.Existing water-based adhesives are not 100% solvent-free and may contain limited volatile organic compounds as additives to their water-based...
Sixteen common types of self-adhesive labels This paper introduces sixteen types of self-adhesive labels commonly seen in daily life. The specific types of self-adhesive labels are as follows： 1. Press smooth writing paper and offset paper labels Multi-purpose label paper for information labels, bar code printing labels, especially suitable for high speed laser printing, also suitable fo...
Label is used to show the relevant instructions of the product of the printed matter, some are on the back of the glue, but there are some printed matter is not with glue, glue label is known as "self-adhesive label". Self-adhesive label is a kind of material, also called self-adhesive material. It is a composite material made of paper, film or other special materials, coated with adhesive on...
Protective film glue transfer, there are a variety of factors, I believe that in the work, many teachers will also encounter a similar situation.The phenomenon of the so-called glue transfer is uneven coating or in the process of transportation, the glue shift remains on the surface of the profile, commonly known as glue transfer. Protective film glue transfer can be divided into the followin...
Hot melt adhesive (English name: HotGlue) is a kind of plastic adhesive, in a certain temperature range, its physical state changes with the change of temperature, but the chemical properties remain the same, its non-toxic and tasteless, belongs to environmental protection chemical products.Because the product itself is solid, easy to package, transport, storage, no solvent, no pollution, non-toxi...
The relationship between the index of laminating glue and common problems I. Viscosity Viscosity is the internal friction of the liquid, and colloquially, the thin consistency of the glue. The viscosity of the glue does not indicate the bonding performance of the glue, in other words, the thicker the glue is, the better the performance is. The viscosity can be adjusted within a cert...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية