Categories
new blog
The third step in the treatment of water-based paint coated substrates is sealing. The role of the water-based putty is to make the surface of the substrate such as wood not very regular and smooth and minor defects and defects, such as pores, fine cracks, pits, joints and concrete, to reduce the surface roughness and increase the flatness.The requirements for water-based putty are good adhesion a...
3.Process variations of different paint types-Waterborne wood paint application process 2 Applying a matt lacquer to the varnish can change the coating to a matte finish, while applying a varnish to a matt lacquer reduces the brightness of the film and does not achieve maximum brightness and transparency. The color paint of waterborne wood lacquer can be divided into two types: coloured coating an...
Anhui Sinograce Chemical Co., Ltd Polyurethane condoms, known as condoms, are made of polyurethane condoms, similar to latex condoms. Polyurethane was applied to condom production in Japan, until the emergence of China's Nakagawa 001, which broke Japan's monopoly on the production field. Because the common latex condoms on the market are thicker and polyurethane has good ...
According to the current development trend of waterborne polyurethane coating, green polyurethane coating technology is mainly divided into two categories: waterborne polyurethane coating and solvent-free polyurethane coating.Among them, solvent-free polyurethane coating mainly contains polyurethane hot melt adhesive coating and light curing polyurethane coating.Waterborne polyurethane (WPU) is a ...
PCL is a fully degradable polymer with good biocompatibility. When introduced into waterborne polyurethane, it can make waterborne polyurethane have shape memory.Shape memory waterborne polyurethane has attracted wide attention for its shape memory function, temperature sensitivity and moisture permeability. PCL3000 PCL4000 was used as the soft segment, and toluene diisocyanate was used as the har...
After the ink is transferred to the printing surface by the blanket at a certain printing speed and under a certain printing pressure, the fixation and drying speed of the ink film, as well as the color, gloss, fastness and resistance after film formation, etc. ensure the printing effect, which are collectively referred to as the printing quality suitability of the ink. It mainly includes color, p...
Polyurethane (PU) is a kind of organic polymeric compounds containing repeated carbamate group (NHCOO) in the main chain.Polyurethane polymer materials have the advantages of wear resistance, high temperature resistance, good adhesion, easy processing, low price, but some polyurethane water resistance, heat resistance is poor, need to be modified by specific methods, in order to achieve the purpos...
The addition of wetting dispersant has obvious effect on the foam of some water-based ink.For example, polyacrylic acid wetting dispersants foam more than other types of wetting dispersants.Generally speaking, wetting dispersant foam with low dispersion capacity is also less. If diisobutyl sulfonate is based on disate, there is little foam at its content of 0.1-0.25%. The use of thickeners will ma...
The preparation of ink is an important work in the color printing process, which is directly related to the printing quality of the product. Because the color is bright and the brightness is good, the hue is accurate is the basic requirement of the color printing products, to achieve this requirement must first accurately deploy the printing ink. Therefore, the operator must master the color knowl...
The allocation of ink hue is an important work before printing, and it is also a very abstract work.Simple color materials three primary colors, yellow, magenta, green can be deployed into red, orange, yellow, green, blue, purple and other dozens of colors. In the actual deployment process, only by the three primary colors of ink can not get the required color, this is because the ink manufacturer...
There are four common waterborne polyurethane thickeners: ①Inorganic thickeners, such as flake silicates, fumed silica, etc.; ②Natural organic thickeners, such as cellulose ethers; ③Synthetic organic thickeners, such as polyacrylates, polyvinylpyrrolidone; ④associative thickener. This paper mainly introduces the associated emulsion thickener. Associative emulsion thickeners are non-ionic synthetic...
Ink resin is the pigment carrier in the ink, is the core material of the ink, its quality is good or bad, will directly affect the performance of the ink, because the connection material to a large extent determines the viscosity of the ink, viscosity, dryness, fluidity and other properties. Color fastness The adhesion between the ink and the substrate mainly includes the chemical bond force ...
Anti-viscosity is an important physical property index of printing ink.Gravure printing is a kind of printing method with high ink supply, good reproducibility and fast printing speed. Most of the inks used are solvent-based volatile drying inks.After the ink is transferred to the substrate through the printing plate, it passes through the drying channel, and the organic solvent is quickly volatil...
The resins that can be used for water-based gravure inks are acrylic resin, polyurethane resin, alkyd resin, etc. Each resin has different characteristics and application occasions, and needs to be selected according to the actual situation. First, water-based gravure ink overview Water-based gravure ink is an environmentally friendly ink, compared with traditional ink, its volatility is small, no...
Aqueous matte resin matte aliphatic aqueous polyurethane dispersion is a high performance solvent-free anionic aliphatic matte aqueous polyurethane, dull, soft to touch, with excellent hydrolysis resistance, heat resistance and bending resistance. Product performance Appearance Milky liquid Application With excellent flexibility and adhesion, it can be used alone or mixed with other em...
Many people see that a lot of Teflon coatings used in industry are green, especially when used in molds, let's talk about the reasons. The use of coating characteristics In extrusion or die casting products, generally dark, for example, rubber, silicone and so on, if the coating is made of dark, then whether the coating falls off is more difficult to see. Therefore, made of light color and with br...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية