Product Detail
Description
General purpose hot melt pressure sensitive adhesive for self-adhesive labels and adhesive tapes. It can be used for non-direct contact labeling of logistics labels, food, medicine and cosmetics and other products. It has good performance in high-speed die-cutting, waste discharge and automatic labeling.
Type Pressure sensitive adhesive
Key Features
Strong initial adhesion & excellent peeling strength
Can be attached to most flat surfaces including cardboard, plastic film, fruit, etc.
Certain low temperature resistance and hydrophilicity, and small bottles are not recommended
Typical Properties
Appearance: Amber solid
Solid content: 100%
Viscosity(175℃): about 10000cps
Softening point: 100℃(Ring and ball method)
Coating thickness: 19um
Loop Tack(N/25mm): ≥16N
90°Peel Adhesion(N/25mm): ≥8N
Holding Power(H/25mm): ≥50h
Coating thickness: 25um
Loop Tack(N/25mm): ≥18N
90°Peel Adhesion(N/25mm): ≥10N
Holding Power(H/25mm): ≥50h
The lowest Labeling Temperature: -5℃
Service Temperature: -20℃~65℃
Test conditions: The test strips were placed under standard conditions of 23℃±2℃, 50%RH±5%RH for 4 hours before testing.
Application
Applicable to PP (polypropylene), PET, synthetic film, coated paper, kraft paper and other surface materials, with good adhesion,not suitable for PVC substrates
Recommended operating conditions: Suitable for all conventional slot glue and roller hot melt adhesive dispensing systems
Recommended operating temperature: 140º C to 180º C, depending on the machine, substrate, environment and other conditions
Note: Do not mix with other adhesives. The hot melt adhesive tank must be tightly covered to prevent debris from falling into and affecting the performance of the adhesive. Since hot melt adhesive must be heated when used, personal protective equipment must be worn. It is recommended to use it in a "first in, first out" cycle.
Storage and Handling
25kg/box
Store below 40°C in a dry cool place.
Storage period: one year
According to non-dangerous goods transport