Search
  • Water based wallpaper glue
    Water based wallpaper glue SA-229
    Non-toxic and eco-friendly. It is water based acrylic emulsion copolymer is designed for wallpaper glue. High adhesive force, good flowability and coating performance.
    read more
  • Water based trademark glue
    Water based trademark adhesive/glue SA-230
    Non-toxic and eco-friendly. It is water based acrylic emulsion copolymer is designed for trademark glue. High adhesive force, good flowability and excellent weatherability.
    read more
  • acrylic polymer dispersion
    Water based positioning adhesive for fiberglass mesh SA-2064
    High adhesive force acrylic emulsion is designed for fiberglass mesh manufactural process. It has excellent positioning functions and improves the stiffness and lifetime of fiberglass mesh. Good water resistant, fast drying speed, excellent anti stripping performance.
    read more
  • Water based polyurethane flocking adhesive
    Water based polyurethane flocking adhesive PU-825
    Description Water based polyurethane electrostatic flocking adhesive is designed for rubber, PVC, PU, shoes materials etc. It is VOC free and formaldehyde free Type Water based polyurethane dispersion (PE/PU) Key features VOC and formaldehyde-free Stable, good water resistance Non-toxic, non-irritating, easy to clean Excellent dry and wet wipe resistance performance Excellent adhesion, can heat resistant at 90℃ after add curing agent Typical properties Appearance: White and bluish liquid Ph: 7.0-8.0 Solid content: 40±1% Charge: Anionic Viscosity (25℃): 100-500cP Softening point: 50-55℃ Density: 1.05±0.2 Notice Recommend: If want improve the performance, add 5% curing agent, then stir uniformly Application way: Spray, roller, brush screen printing etc. Open time within 4 minutes, if more than this time, may reduce the flocking fastness Don’t mix with other different properties of adhesives Application -Electrostatic flocking adhesive for rubber, PVC, PU, shoes materials etc. Storage and handling Available in 200 kg/ barrel or 25 kg/ barrel Store products in tightly closed original containers at 6-35℃, avoid low and high temperature Shelf life: 6-9 months from delivery date According to non-dangerous goods transport
    read more
  • Water based vacuum suction plastic adhesive
    Water based vacuum suction plastic adhesive PU-830
    Water based vacuum suction plastic adhesive is eco-friendly, VOC free and formaldehyde free, it is designed for PVC, other soft materials and MDF, particleboard, wood, paint free doors, cabinets, speakers board, computer tables, etc.
    read more
  • Water based polyurethane
    Water based polyurethane composite adhesive PU-835
    Water based composite adhesive is non-toxic, VOC free and formaldehyde free, it is designed for PVC, PP, sponge, paper, cloth, can be also used for high grade composite fabric, car interior decoration, bags, paper bags, etc.
    read more
  • Water based polyurethane card adhesive
    Water based polyurethane card adhesive PU-840
    Water based card adhesive is VOC free and formaldehyde free, it is designed for PVC firm for card industry
    read more
  • Water based acrylic adhesive
    Water based acrylic adhesive for aluminum foil SA-226
    Water based acrylic adhesive is designed for aluminum foil. High adhesive force, good flowability and low temperature resistant. It is suitable for aluminum foil laminating various type of film (Paper, BOPP and PET etc.).
    read more
  • Water based acrylic adhesive
    Water based pressure-sensitive adhesive for BOPP tapes SA-227
    Water based acrylic adhesive is designed for BOPP tapes. Good leveling, excellent holding power and high peel strength. It is suitable for kinds of adhesive/glue tapes.
    read more
  • Water based laminating adhesive
    Water based dry laminating adhesive SA-228
    Water based laminating adhesive for paper and BOPP. It adapts to dry lamination quick drying (tunnel drying). Eco-friendly, non-toxic and excellent comprehensive performance. It can replace solvent based laminating adhesive.
    read more
  • Water based gloss coating for nonpolar films
    Water based gloss coating for nonpolar films SA-235
    Water-based primer coating SA-235 is specially designed for corona treated nonpolar PET/BOPET film, give the best possible primer properties(ink acceptance, adhesiveness) to UV inks
    read more
  • Castable Polyurethane prepolymer
    Castable Polyurethane prepolymer IPDI System
    Description Polyurethane prepolymer IPDI system Key features Good transparency Excellent UV resistance Low viscosity at room temperature With adjustable curing time. Typical properties IPDIsystem IPDI-230 IPDI-231 IPDI-232 Prepolymer Appearance (25℃) Colorless Transparent Liquid Colorless Transparent Liquid Colorless Transparent Liquid NCO Content(%) 400±100 400±100 400±100 Using Mixture Ratio (PHR) 100:100 100:100 100:100 Life in the Reaction Kettle 180~480 180~480 180~480 Stripping Time(90-100℃/min) 3~5 3~5 3~5 Physical Properties of Finished Products Hardness (Shore A) 65±5 85±5 70±5D Tensile Strength (MPa) 15.2 17.0 22.3 Tearing Strength (kN/m) 10 19 25 Elongation at Break(%) 170 130 110   Application -The utility model is mainly used for the production of products which are not required to be changed, such as a lens, an instrument panel, and can also be used for dripping glue, making nameplate, labels, etc. Usage method -The utility model can be used for manual operation, and is more suitable for gluing machine and pouring machine. Attention The prepolymer should be stored at low temperature and dry place, avoid the moisture and moisture when used After the opening of the prepolymer should be used up as soon as possible, if not exhausted with nitrogen seal. The storage period of unopened prepolymer is three months. If you want to add color paste or other materials, keep the water content below 0.1%, and consider the compatibility of additives. The prepolymer should be stored at low temperature and dry place, not long time at higher temperatures (more than 75 degrees Celsius) heating.
    read more
  • liquid Polyurethane elastomer
    Polyurethane prepolymer NDI, PPDI System
      Description Polyurethane prepolymer NDI, PPDI system Key features The utility model has the advantages of high dynamic mechanical property, especially heat resistance, and can work in the environment of 120 DEG C for a long time. Typical properties NDI、PPDI system NP-240 NP-245 Prepolymer Appearance (25℃) Waxy solid Waxy solid NCO Content (%) 3.6~4.2 3.6~4.2 Using Mixture Ratio (PHR) 3.7~4.3 3.7~4.3 Life in the Reaction Kettle 3~5 3~5 Physical Properties of Finished Products Hardness (Shore A) 90±5 90±5 Tensile Strength (MPa) 53.5 57.1 Tearing Strength (kN/m) 129.5 131.7 Elongation at Break (%) 523 551 Akron Abrasion (cm3/1.61km) 0.01 0.01 Application -The utility model is mainly used for producing products with the characteristics of heat resistance, high abrasion resistance, high bearing capacity, low internal heat generation, etc. Usage method -Can be used for manual operation, more suitable for the operation of the casting machine, chain extender is BDO or HQEE, etc. Attention The prepolymer should be stored at low temperature and dry place, avoid the moisture and moisture when used After the opening of the prepolymer should be used up as soon as possible, if not exhausted with nitrogen seal. The storage period of unopened prepolymer is three months. If you want to add color paste or other materials, keep the water content below 0.1%, and consider the compatibility of additives.
    read more
  • Hot sale Castable Polyurethane prepolymer Polyol MDI System
    Castable Polyurethane prepolymer Polyol MDI System
    Description Polyurethane prepolymer polyol MDI system Key features No irritating odor. Products have good toughness and elasticity. Excellent abrasion resistance and water resistance. Typical properties polyol MDI system P-MDI--100 P-MDI -101 P-MDI -102 P-MDI -103 P-MDI -104 P-MDI -105 Prepolymer Appearance (25℃) Waxy solid Waxy solid Waxy solid Waxy solid Waxy solid Waxy solid NCO Content(%) 5.5~6.5 6.6~7.2 7.5~8.5 5.0~6.0 6.0~6.8 7.2~8.0 Using Mixture Ratio (PHR) 5.6~6.6 6.7~7.3 7.6~8.6 5.1~6.1 6.1~6.9 7.3~8.1  Life in the Reaction Kettle (75~78℃/min) 8~10 5~7 5~7 8~10 5~7 5~7 Physical properties of finished products Hardness (Shore A) 60±5 85±5 95±5 60±5 85±5 95±5 Tensile Strength (MPa) 51.3 55.3 57.2 41.7 45.5 52.8 Tearing Strength (kN/m) 78.4 135.0 135.7 70.6 123.2 127.5 Elongation at Break (%) 516 520 498 461 577 558 Akron Abrasion (cm3/1.61km) 0.08 0.05 0.03 0.08 0.05 0.03 Application Mainly used in the production of polyurethane elastomer products with the corresponding requirements, such as a variety of industrial components, roller, rubber roller, rubber, oil seal, cushion material, plate, etc.. Usage method Can be used for manual operation, more suitable for the operation of the casting machine, chain extender are BDO and TMP, etc. Attention The prepolymer should be stored at low temperature and dry place, avoid the moisture and moisture when used After the opening of the prepolymer should be used up as soon as possible, if not exhausted with nitrogen seal. The storage period of unopened prepolymer is three months. If you want to add color paste or other materials, keep the water content below 0.1%, and consider the compatibility of additives.
    read more
  • Hot sale Castable Polyurethane prepolymer Polyether TDI System
    Castable Polyurethane prepolymer Polyether TDI System
    Description Polyether prepolymer polyether TDI system Key features General purpose products. High mechanical strength Good abrasion resistance, good hydrolysis resistance Easy to operate, low price. Typical properties Polyether TDI System PET- 510 PET- 511 PET- 512 PET- 513 PET- 514 PET- 515 Prepolymer Appearance (25℃) viscous liquid viscous liquid viscous liquid viscous liquid viscous liquid viscous liquid NCO Content(%) 2.8~3.0 3.6~4.0 4.2~4.5 4.8~5.5 5.5~6.0 6.0~6.8 Using Mixture Ratio(PHR) 8.0~8.5 10.0~11.5 12.0~13.0 13.5~15.8 15.5~16.0 16.0~18.8 Life in the Reaction Kettle(75-78℃/min) 8~10 5~7 5~7 3~5 3~5 3~5 Physical properties of finished products Hardness (Shore A) 60±5 75±2 80±2 85±2 90±2 95±2 Tensile Strength (MPa) 20.7 22.5 22.8 26.1 32.6 35.6 Tearing Strength (kN/m) 22.6 27.2 27.5 33.4 38.2 38.2 Elongation at Break(%) 401 377 358 350 320 313 Akron Abrasion(cm3/1.61km) 0.05 0.05 0.05 0.05 0.03 0.03 Application -Mainly used in the production of ordinary polyurethane elastomer products, such as a variety of industrial components, roller, rubber roller, rubber, oil seal, cushioning materials, plates, etc.. Usage method Suitable for manual and high temperature casting machine operation, chain extender is MOCA. Attention The prepolymer should be stored at low temperature and dry place, avoid the moisture and moisture when used After the opening of the prepolymer should be used up as soon as possible, if not exhausted with nitrogen seal. The storage period of unopened prepolymer is three months. If you want to add color paste or other materials, keep the water content below 0.1%, and consider the compatibility of additives.
    read more
  • Hot sale Castable Polyurethane prepolymer Polyester TDI System
    Castable Polyurethane prepolymer Polyester TDI System
    Description Polyurethane prepolymer polyester TDI system Key features General purpose products, the most widely used. High mechanical strength, good wear resistance. Good oil resistance, solvent resistance, heat resistance. Typical properties  Plyester tdi system Pes-610 Pes-611 Pes-612 Pes-613 Pes-614 Pes-615 Prepolymer Appearance (25℃) Waxy solid Waxy solid Waxy solid Waxy solid Waxy solid Waxy solid Nco content(%) 2.4~2.6 3.0~3.5 3.6~4.2 4.0~4.5 4.5~4.8 5.0~5.8 Using mixture ratio (phr) 6.9~7.5 8.6~9.5 9.0~10.0 11.0~12.0 13.5~14.5 15.0~16.0 Life in the reaction kettle(75-78℃/min) 5~7 5~7 5~7 5~7 3~5 3~5 Physical properties of finished products Hardness (shore a) 60±5 75±2 80±2 85±2 90±2 95±2 Tensile strength (mpa) 28.7 33.5 42.3 45.5 48.8 52.6 Tearing strength (kn/m) 35.9 49 52 55.1 58.3 60 Elongation at break(%) 498 474 451 440 410 337 Akron abrasion(cm3/1.61km) 0.05 0.03 0.03 0.02 0.02 0.02 Application Mainly used in the production of ordinary polyurethane elastomer products, such as a variety of industrial components, roller, rubber roller, rubber, oil seal, cushioning materials, plates, etc. Usage method Suitable for manual and high temperature casting machine operation, chain extender is MOCA. Attention The prepolymer should be stored at low temperature and dry place, avoid the moisture and moisture when used After the opening of the prepolymer should be used up as soon as possible, if not exhausted with nitrogen seal. The storage period of unopened prepolymer is three months. If you want to add color paste or other materials, keep the water content below 0.1%, and consider the compatibility of additives.
    read more

Copyright © 2015-2019 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com

top