Type Phenyltriethoxysilane Typical properties Appearance:             Light yellow liquid Concent:                    98% CAS:                           780-69-8 Flash point:                42℃ Molecular Weight:     240 Boiling point:              112 Density:                      0.993±0.005g/cm3 Refractive index:       1.458 ± 0.005 Structural formula:     C6H5Si(OC2H5)3 Application -Producing phenyl silicone oil -Phenyl silicone oil feedstock -Electronic materials handling -Silicone resin crosslinking agent -Preparation of organic polymer materials Storage and handling Available in 25 kg/drum Store products in tightly closed original containers at 5-40℃ Shelf life: 12 months from delivery date According to non-dangerous goods transport

Excellent adhesion promoters Improve strength and moisture resistance Improve the filler in the polymer wetting and dispersion Increase the moisture resistance and increase the compression resilience Improve the physical and mechanical reinforced plastic dry and wet bending strength, compressive strength, shear strength, etc Enhance the cohesion and improve the mechanical, electrical, water resistance, anti-aging properties Improve the dispersion of pigment and increase of glass, aluminum, ferrous metal adhesion

Improve the physical and mechanical properties Make rubber silica and other inorganic fillers to produce good coupling effect Can be used as rust remover, active agents, coupling agents, crosslinking agents, reinforcing agents Can improve the tensile strength of the rubber, reducing its compression set, abrasion resistance improved rubber Can improve its corrosion resistance, oxidation resistance and an increase in resin and other polymer materials with adhesion surface

Feature Improve the adhesion of silicone rubber and metal Type Diethylamino substituting methyl triethoxysilane Typical properties Appearance: Light yellow transparent liquid Boiling range: 100 ~ 135℃/5mmHg Structural formula: (C2H5)2NCH2Si(OC2H5)3 Solubility: Can be dissolved dry alcohol, acetone and other organic solvents, is unstable in water, easily hydrolyzed Application -Silicone rubber curing agent -Curing agent for epoxy resins and tackifier -Used for surface treatment agent silicone rubber and metal bonding time Storage and handling Available in 25 kg/drum Store products in tightly closed original containers at 5-40℃ Shelf life: 12 months from delivery date According to non-dangerous goods transport

Enhance adhesion between the metal Improve water resistance, weather resistance

Can remove the oil, grease, metal filling and dust The consumption is 60~80% of similar liquid degreaser Effective component is 1.2~1.5 times of liquid degreaser Scarcely any impure ion and very weak corrosion on the equipment Apply to the degrease and cleaning of metal chemical conversion treatment Steel plate cleaning effect: (1) residual oil value <10mg/m2; (2) residual iron value <15mg/m2; (3) reflectivity >90%; (4) Rust inhibition preserve period (before annealing) >7 days.

Polydimethylsiloxane with a viscosity of approx. 1000 mPa.s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils.

SA-110 is modified silicone acrylic emulsion specialized in the external wall coating. It has good properties of scrub resistance, water resistance, used for real stone paint and multicolour paint

SA-112 silicone emulsion is the unsaturated bond containing silicone monomer and acrylic monomer added to the appropriate additives, through the core-shell polymerization process polymerization of the emulsion.

SA-109 is modified silicone acrylic emulsion specialized in the external wall coating.It has good properties of scrub resistance, water resistance.

As temperature resistance decorative non-stick coating, it could be used on outside of aluminum non-stick cookware. Please do complete applicability test for specific use

Silicone Type Antifoam Agent Type HS code Appearance Active Ingredient Suggested Add Amount Ingredient Solvent Applications and Characteristics waterbase system solventbase system UV system SG-430 3402900090 water-write transparent solution 7% 0.1-1% Mixture of  antifoam copolymer and organosilicone aliphatic hydrocarbon 1.Excellent compatibility and fast speed of defoam ability. 2.can be used in any stage of coating producing and operating. 3.Suitable for UV and epoxy system.   √   SG-441   water-write transparent solution <3% 0.1-1% Modified polysiloxane solution Mixed aromatics 1.Excellent compatibility and fast speed of defoam ability. 2.can be used in any stage of coating producing and operating.   √   SG-472   water-write transparent solution 70% 0.1-1% Modified polysiloxane solution Mixed aromatics 1.Good compatibility and strong defoam ability. 2.Excellent foam-broken and anti foam develop ability. 3.Suitable for any stage of the coating produce and all types of the operate way like brush, roller and spray coat.   √ √ SG-467   water-write transparent solution 1% 0.1-1% Modified polysiloxane solution Isooctyl acetate 1.Good compatibility and strong defoam ability. 2.Excellent foam-broken and anti foam develop ability. 3.Suitable for any stage of the coating produce and all types of the operate way like brush, roller and spray coat.   √ √ SG-475   lemon-yellow viscous fluid 100% 0.05-1% Modified polysiloxane  … 1.Strong defoam ability and suitable for solventbase and UV system. 2.especially sutiable for defoaming and foaming off of high viscosity system.   √ √ SG-486N   feculent viscous fluid 100% 0.05-1% White carbon black modified polysiloxane … 1.High efficiency of defoaming, foam off and anti-foam development,epscially it has good effect to broke little foam. 2.Especially suitable for silk screen ink and epoxy system.   √ √ SG-419W   water-write transparent solution 60% 0.05-1% Modified polysiloxane solution dipropylene glycol monomethyl ether 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √     SG-424W   lemon-yellow viscous fluid 100% 0.05-1% Modified polysiloxane  … 1.High speed of defoaming. 2.Easy to disperse. 3.Strong defoam ability. √     SG-465W   white emulsion 50% 0.05-1% Modified organosilicone emulsion water 1.High speed of defoaming. 2.Easy to disperse. 3.Strong defoam ability. √     SG-471W   lemon-yellow viscous fluid 100% 0.05-1% Modified polysiloxane  … 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √ √ √ SG-481W   lemon-yellow feculent  viscous fluid 100% 0.05-1% Mixture of modified polysiloxane and antifoam materials … 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √ √ √ SG-485W   white emulsion 25% 0.05-1% Modified organosilicone emulsion water 1.High speed of defoaming. 2.Easy to disperse. 3.Strong defoam ability. √     SG-491W   lemon-yellow viscous fluid 100% 0.05-1% Mixture of modified polysiloxane and antifoam materials … 1.Silicon oil type defoam agent, suitable for solventbase and waterbase system. 2.High efficiency of defoaming, fit for defoaming and foaming off with high viscosity system. 3.Need to be grinded after adding. √ √ √

Non-silicification Type Antifoam Agent Type HS code Appearance Active Ingredient Suggested Add Amount Ingredient Solvent Applications and Characteristics waterbase system solventbase system UV system SG-506W 34029000.9 lemon-yellow viscous fluid 100% 0.3-1% Mineral oil compound … 1.High efficiency of defoaming. 2.used in emulsion latex system. √     SG-520   lemon-yellow viscous fluid 100% 0.3-1% Non-silicification copolymer … 1.Excellent compatibility and deadly lower trend of shrinkage.2.High speed of defoaming. 3.Suitable for UV system and other high crosslinking system.   √ √ SG-530   lemon-yellow viscous fluid 100% 0.1-1% Acrylic ester copolymer … 1.High defoam ability. 2.Has great effect to thick-coat , high viscosity system, zinc stearate primer.3.Suitable for PU,UPE and epoxy system etc.   √ √ SG-552   lemon-yellow transparent solution 30% 0.1-1% Acrylic ester copolymer Mixed aromatics 1.Higher defoam efficiency and cost performance.       2.Especially suitable for thick-coat , high viscosity system and  zinc stearate primer.3.Lower trend of shrinkage   √   SG-555   lemon-yellow transparent solution 7% 0.1-1% Non-silicification copolymer solution Mixed aromatics 1.Excellent compatibility and deadly lower trend of shrinkage. 2.Lower effect to the transparency of the coat film. 3.Suitable for medium and high polar system like UV.     √ SG-557   lemon-yellow transparent solution 40% 0.1-1% Non-silicification copolymer solution Mixed aromatics 1.Excellent compatibility and deadly lower trend of shrinkage. 2.Lower effect to the transparency of the coat film. 3.Suitable for medium and high polar system like UV, epoxy and PE system.   √ √ SG-590   Water white and lemon-yellow viscous fluid 100% 0.1-1% vinyl ether compound … 1.High defoam ability. 2.Suitable for all types of solventbase system and UV system especially for coil material coat. 3.Excellent foam burst effect.   √ √

The Adhesion Promoter Type HS code Appearance Active Ingredient Suggested Add Amount Solvent Ingredient Applications and Characteristics waterbase system solventbase system UV system SG-8110 3402900090 Water white transparent fluid 100% 0.1-1% … silicoorganic compound 1.Contain organic amine group. 2.Can react with resin and inorganic base materials at the same time. 3.Increase the adhensive force of the coating film to the base materials. 4.Increase the humid heat resist property,salt mist resistance and water-resistant property of the coating film.   √   SG-8120   Water white transparent fluid 100% 0.1-1% … silicoorganic compound 1.Contain organic amine group. 2.Can react with resin and inorganic base materials at the same time.3.Increase the adhensive force of the coating film to the base materials. 3.Increase the humid heat resist property,salt mist resistance and water-resistant property of the coating film.   √   SG-8130   Water white transparent fluid 100% 0.1-1% … silicoorganic compound 1.Contain epoxy group. 2.Can react with resin and inorganic base materials at the same time. 3.Increase the adhensive force of the coating film to the base materials. 4.Increase the humid heat resist property,salt mist resistance and water-resistant property of the coating film.   √   SG-8140   Water white transparent fluid 100% 0.1-1% … silicoorganic compound 1.Contain unsaturated double bond group. 2.Suitable for UV system like UV glass ink.  3.Can react with resin and inorganic base materials at the same time. 4.Increase the adhensive force of the coating film to the base materials.  5.Increase the humid heat resist property,salt mist resistance and water-resistant property of the coating film.     √ SG-8145   Water white transparent fluid 100% 0.1-1% … organophosphorus ester derivative 1.Contain unsaturated double bond group and suitable for UV system. 2.Can react with resin and inorganic base materials at the same time. 3.Increase the adhensive force of the coating film to the metal base materials. 4.Increase the humid heat resist property,salt mist resistance and water-resistant property of the coating film.     √ SG-8205N   Water white viscous fluid 50% 0.1-5% N,N-dimethyl acetamide Special high molecular polymer 1.Good compatibility to various system. 2.Contain -OH and can participate in cross-linking reaction of polyurethane and bake varnish system. 3.Good adhensive force to various metal base materials especially for some hard adhensive base materials like electroplating. 4.Can increase salt mist resistance, water-resistant property,flexibility and anti impact property.   √   SG-8255   Yellowish viscous fluid 60% 0.1-5% Mixed dibasic ester Special polyester compound 1.Suitable for self-drying coating system. 2.Can increase the adhensive force to the metal base materials and flexibility of the coating film. 3.It can be used as anti silver-droping agent in aluminium paint. 4.Can not let the metal pigment black.   √   SG-8310   Yellowish transparent fluid 100% 0.2-2.0% … organotitanium compound 1.Belongs to high activity organotitanium compound. 2.It is sealing state in the normal temp. 3.It can generate some groups which can react with -OH,-NH2,-CPPH groups etc from resins and base materials. 3.It can generate middle layer between base materials and resins, which can increase the adhensive force of the system. 4.It can be used in coating, ink etc system.   √  

silicone coating for nylon fabric factory Water and oil-repellent coating concentrate

High hardness Excellent water resistance Good abrasion resistance Wide adaptability