Buy Hot Melt Glue for deep low temperature label adhesives WM1956,suppliers,manufacturers,factories-Anhui Sinograce Chemical Co.,Ltd.

Hot Melt Glue for deep low temperature label adhesives WM1956

This glue is specially used for deep low temperature adhesives. It has excellent performance on many packaging materials in low temperature environment. It can be used for non-direct contact labeling of products such as food, medicine and cosmetics. It has good performance in high-speed die-cutting, waste discharge and automatic labeling.

Brand:
sinograce
item no.:
WM1956
product origin:
China Anhui
Color:
Amber solid
shipping port:
Shanghai and other ports
Lead Time：
15-25 Days

inquire

download

Product Detail

Description

Type

Pressure sensitive adhesive

Key Features

Strong initial adhesion at low temperature & excellent peeling strength

Can be attached to most flat surfaces, including cardboard, plastic film, etc. Small bottles are not recommended

Not suitable for irregular curved surfaces and particularly soft bottles

Typical Properties

Appearance: Amber solid

Solid content: 100%
Viscosity(175℃): about 15000cps

Softening point: 80℃(Ring and ball method)

Coating thickness: 18um
Loop Tack(N/25mm): ≥12N
90°Peel Adhesion(N/25mm): ≥6N
Holding Power(H/25mm): ≥30h

Coating thickness: 25um
Loop Tack(N/25mm): ≥14N
90°Peel Adhesion(N/25mm): ≥7N
Holding Power(H/25mm): ≥30h

The lowest Labeling Temperature: -20℃
Service Temperature: -50℃~55℃

Test conditions: The test strips were placed under standard conditions of 23℃±2℃, 50%RH±5%RH for 4 hours before testing.

Application

Applicable to PP (polypropylene), PET, synthetic film, coated paper, kraft paper and other surface materials, not suitable for PVC substrates

Recommended operating conditions: Suitable for all conventional slot glue and roller hot melt adhesive dispensing systems

Recommended operating temperature: 140º C to 180º C, depending on the machine, substrate, environment and other conditions

Note: Do not mix with other adhesives. The hot melt adhesive tank must be tightly covered to prevent debris from falling into and affecting the performance of the adhesive. Since hot melt adhesive must be heated when used, personal protective equipment must be worn. It is recommended to use it in a "first in, first out" cycle.

Storage and Handling

- 25kg/box

- Store below 40°C in a dry cool place.

- Storage period: one year

- According to non-dangerous goods transport

send your inquiry directly to this supplier

we will give you a quotation within 24 hours.

Products :

Hot Melt Glue for deep low temperature label adhesives WM1956