Hot Melt Glue WM1964 for General purpose self-adhesive labels and adhesive tapes

Description

General purpose hot melt pressure sensitive adhesive for self-adhesive labels and adhesive tapes. 
It can be used for non-direct contact labeling of logistics labels, food, medicines, cosmetics and other products.

Type

Pressure sensitive adhesive

Key Features

Strong initial adhesion and peel strength
Can be pasted to most flat surfaces, including cardboard, plastic film, etc. Small bottles are not recommended
Good performance in high-speed die-cutting, waste discharge and automatic labeling.

Typical Properties

Appearance: Amber solid            

Test conditions: The test strips were placed under standard conditions of 23℃±2℃, 50%RH±5%RH for 4 hours before testing.

Application

Applicable to PP (polypropylene), PET, synthetic film, coated paper, kraft paper and other surface materials, with good adhesion，not suitable for PVC substrates 

Recommended operating conditions: Suitable for all conventional slot glue and roller hot melt adhesive dispensing systems

Recommended operating temperature: 140º C to 180º C, depending on the machine, substrate, environment and other conditions

Note: Do not mix with other adhesives. The hot melt adhesive tank must be tightly covered to prevent debris from falling into and affecting the performance of the adhesive. Since hot melt adhesive must be heated when used, personal protective equipment must be worn. It is recommended to use it in a "first in, first out" cycle.

Storage and Handling

25kg/box