Hot Melt Glue WM1963 for tire labels

Description

This is a specially formulated high sticky adhesive specifically for tire labels

Type

Pressure sensitive adhesive

Key Features

Strong initial adhesion and peel strength

Specially formulated adhesive has excellent adhesion to the curved and irregular surfaces of the tire, and even severe contamination on the tire surface, for example the transfer of release agents or rubber components cannot destroy its adhesion

Typical Properties

Appearance: Amber solid            

Test conditions: The test strips were placed under standard conditions of 23℃±2℃, 50%RH±5%RH for 4 hours before testing.

Application

Suitable for PET, synthetic film and other film surface materials, with good adhesion, not suitable for PVC substrate
Recommended operating conditions: Suitable for all conventional slot glue and roller hot melt adhesive dispensing systems     
Recommended operating temperature: 130º C to 160º C, depending on the machine, substrate, environment and other conditions   
Note: Do not mix with other adhesives. The hot melt adhesive tank must be tightly covered to prevent debris from falling into and affecting the performance of the adhesive. Since hot melt adhesive must be heated when used, personal protective equipment must be worn. It is recommended to use it in a "first in, first out" cycle.

Storage and Handling

- 25kg/box
- Store below 40°C in a dry cool place. 
- Storage period: one year 
- According to non-dangerous goods transport