Hot Melt Glue high sticky adhesive for suitable for sticking to some rough surface WM1961

Description

This is a specially formulated high sticky adhesive, especially suitable for sticking to some rough surfaces, such as conventional tires, woven bags, wooden boards, cartons, short-haired carpets, etc.

Type

Pressure sensitive adhesive

Key Features

High adhesion, excellent adhesion to irregular surfaces, even the harsh contamination of the objects being pasted cannot damage its adhesion
Automatic labeling is not recommended

Typical Properties

Appearance: Amber solid            
Solid content: 100%
Viscosity(175℃): about 11000cps     
Softening point: 90℃(Ring and ball method)

Coating thickness: 30um
Loop Tack(N/25mm): ≥268N
90°Peel Adhesion(N/25mm): ≥20N
Holding Power(H/25mm): ≥72h

Coating thickness: 50um
Loop Tack(N/25mm): ≥30N
90°Peel Adhesion(N/25mm): ≥22N
Holding Power(H/25mm): ≥72h

The lowest Labeling Temperature: 5℃
Service Temperature: -20℃~65℃

Test conditions: The test strips were placed under standard conditions of 23℃±2℃, 50%RH±5%RH for 4 hours before testing.

Application

Applicable to PP (polypropylene), PET, synthetic film, coated paper, kraft paper and other surface materials, with good adhesion, not suitable for PVC substrates

Recommended operating conditions: Suitable for all conventional slot glue and roller hot melt adhesive dispensing systems

Recommended operating temperature: 140º C to 180º C, depending on the machine, substrate, environment and other conditions

Note: Do not mix with other adhesives. The hot melt adhesive tank must be tightly covered to prevent debris from falling into and affecting the performance of the adhesive. Since hot melt adhesive must be heated when used, personal protective equipment must be worn. It is recommended to use it in a "first in, first out" cycle.

Storage and Handling

- 25kg/box

- Store below 40°C in a dry cool place. 

- Storage period: one year 

- According to non-dangerous goods transport