Water based wood lacquer is mainly made of waterborne acrylic acid and polyurethane and refined by strict production process standards. It is suitable for the protection of indoor wood and wood products, and can play the role of decoration, protection and service life extension.Waterborne wood lacquer uses water as diluent, does not contain benzene and other harmful substances, non-toxic without stimulating smell, harmless to human body, does not pollute the environment. Waterborne wood lacquers can generally be divided into three categories: The first kind is with acrylic acid the water based wood implement paint that is main composition, its main characteristic is adhesion is good, won't deepen the color of woodwork, but wear-resisting reach fight chemical sex poorer because its technical content is not tall and cost is inferior, make the main product on the market at present. The second type is based on acrylic acid and polyurethane synthetic as the main composition of waterborne wood paint, its characteristics in addition to adhering to the characteristics of acrylic paint, but also increased the characteristics of wear resistance and chemical resistance of polyurethane. The 3rd kind is paint of water of 100 % polyurethane, its wear-resisting performance achieves oily paint even several times, it is advanced product in paint of water bearing.

Automotive interior adhesive is a anionic waterborne polyurethane emulsion developed and produced by ourselves, which belongs to environmental protection waterborne polyurethane adhesive. Appearance Dark grey liquid Solid content(% ) 50±1 PH 6-9 softening point(℃) 45-55℃ Proportion（g/cm3） 1.06±0.02 viscosity（mPa.s） 1000-2000（Viscosity can be adjusted） Application Area Automobile interior adhesive is suitable for automobile back-up tire cover cover curtain sunshade and other composite automotive interior parts PP and PVC PVC and PVC XPE and PVC XPE and needled cloth glass fiber reinforced board and flannelette bonding, used in automobile back-up tire cover sunshade coat and hat rack Product Advantages 1. Water-based Environmental 2. It has the characteristics of smooth surface and less orange peel 3. Excellent initial and final adhesive strength 4. With curing agent can achieve more than 110 temperature resistance 5. Good hydrolysis resistance, good stability of the product Suggested Use Process 1. The ratio of curing agent and curing agent is 5%, and the glue with good mixing should be used up within 4-6 hours 2. Spray the amount of glue in 150-200 grams/square meter (double-sided spray glue), into the oven 80 dry 4-6 minutes to confirm the surface dry before forming bonding 3. The surface of the spray keeps the temperature, and the excellent bonding effect will be obtained 4. Keep the surface hot pressing temperature above 60, pressure 3 kg, pressing time 1 minute

What effect does fog-proof coating have and principle Functions of antifogging coating: 1 Super hydrophilic self-cleaning function: anti-fogging coating also uses super hydrophilic silicon oxide film to form a super hydrophilic film between the painted surface and dirt, so that dirt and coated surface separation and the use of natural rain wash away the stolen goods under the action of gravity, to achieve the purpose of self-cleaning. 2 Antistatic function: antifogging coating can be for the domestic air quality is not good, serious pollution, adding Mitsubishi chemical nanomaterials, antistatic, do not absorb dust and particles in the air, dust, waste gas is also difficult to adhere to the brushing surface. 3 Decomposition oil function: antifogging paint can be used for automobile exhaust, factory and hotel emissions of smoke pollution, adding TiO2 below 5 nanometers, strong decomposition paint stains attached to the coating surface Principle of antifogging coating: Fog is caused when hot air hits cold objects and condenses into small water droplets on the surface. Light is diffused across the surface of these droplets, giving the impression of fog. Therefore, antifogging should prevent the formation of small droplets antifogging coating on its surface has super hydrophilic, which increases the surface tension of water water can not form droplets on its surface, but a layer of water film, fundamentally prevent the formation of mist.

Choosing of adhesive 1.Principles of adhesive selection Consider the type, nature and hardness of the bonding material Consider the shape, structure and process conditions of the bonding material Consider the load and form (tensile force, shear force, peel force, etc.) borne by the bonding part; consider the special requirements of materials such as high temperature and low temperature resistance. 2.Properties of bonding materials Metal: the oxide film on the metal surface is easily bonded after surface treatment; Because the two phase linear expansion coefficient of adhesive bonding metal is too different, the adhesive layer is easy to produce internal stress; In addition, the metal bonding part is prone to electrochemical corrosion due to water action rubber: the greater the polarity of rubber, the better the bonding effect. Nitrile neoprene rubber has great polarity and great bonding strength. Natural rubber, silicone rubber and isobutyl rubber have little polarity and weak adhesion. In addition, the rubber surface often has a release agent or other free out of the auxiliaries, hindering the bonding effect. Wood: porous material, easy to absorb moisture, resulting in size changes, which may result in stress concentration. In addition, polished materials bond better than rough wood. plastic: plastic with large polarity has good bonding performance. Glass: The surface of glass is composed of numerous evenly uneven parts from the microscopic point of view. Use wettability adhesive to prevent the possible bubbles in the concave and convex.In addition, the glass is si-O - as the main structure, its surface layer is easy to absorb water. Because of the strong polarity of glass, polar adhesive is easy to hydrogen bond with the surface, forming a firm bond. Glass is brittle and transparent, take these into account when choosing adhesives. 3.the characteristics and selection of adhesives Connect various materials with different elastic moduli and thickness, especially thin materials The bonding surface is smooth and the aerodynamics is good; Good sealing performance, good corrosion performance; Prolong the service life and reduce the weight of adhesive joints Low labor intensity, low cost, high production efficiency non-conductive adhesive heat resistant seismic insulation. Our company is specialized in the production of water-based glue manufacturers, welcome to email consulting sales staff